Yehhh it is what it is and it's a temporary measure the customer dictates the way forward considering its to get them through and its good business, super video on these two jobs excellent presentation of work. 👍👍👍 always very interesting with a good sense of humour.
I'm just some dufus home owner guy out there. But you are BADASS with your basic technicals and also with your video processing. THANK YOU. My problem, which you are helping with, is my passed fathers home unit. It's a R22 system and at least 30 years old. Major brand, I forget which right now. Over the years I've already repaired - moving the drip conduit from the indoor blocked drain to the exterior; the circuit board (which I got for $40 after waiting awhile) which had the spark igniter failure; the condenser capacitor; the condenser exhaust fan; the handler fan (twice); and other minor maintenance. The unit has been great on heat (after the control board replacement), no CO problems, but the cooling function has gradually declined over 20 years. I recently became aware of the schrader valve thing and this is where I want to compliment you. You are not afraid to share pertinent information. THANK YOU. Your video CONFIRMS the idea of FUCK IT, REPLACE THE SCHRADERS - DO IT - DO IT NOW (The Matrix) I observed your use of valve core removal tools and end hose cutoff valves, all which should be part of any ACmaintenance regimen (THANK YOU). I now have possession of these tools. They are an integral tool for any ac mechanic. They are not "neat" or "cool". They are essential (THANK YOU). I now am "hunting for red october" for a local technician who knows what for on conversion from R22 to R422B. My father left me some R22 but I don't know where it is now. And anything that can reduce my costs to get the old unit running is valuable. Anything you could offer about oil calculations would be nice. THANK YOU Once again - BADASS.
I appreciate all the compliments. Thank you very much. If you want to email me jeffshvacadventures@gmail.com for any specific questions, I’ll do my best to answer them for you. 🤙
422b runs low suction with r22 metering device. A larger piston will work or adjust txv open more. If not your saturated suction will stay under freezing.
Good point. I was right around 38° saturation temp when it was fully charged. And it had basically no load in the space. I felt pretty good with it after I finished.
I have a question if you dont mind? My heat pump was changed out to R422B.. I was charged $150 for each pound. That seems very high. I dont mind paying a reasonable markup but that seems excessive. Question: What is considered a reasonable markup. My markup seems to be 500% or more. Is that typical or should I be talking to the company?
Something to remember, every market is different. What I can buy and sell 422B for might not be what the contractor you used can get it for. Also Different regions have different mark ups. That being said, $150 per lb does seem a little high but if you call the company I’m sure they would be able to explain the mark up to you.
Just out of curiosity and this is just a question and nothing more. Why use R422B over say MO99(R438B) or one of the others available? I know there are like 10-15 choices. I found R438B or 422B are the two best besides R22 itself. I still have two full R22 jugs for specific systems. But I have also been putting in new compressors and TEV's and using 410A since the coils for R22 are so stout and mostly copper, they work amazing, if you can find 5-ton condensers that are still good, the swap is quite affordable. So far I have done four and they are all pounding away just fine. The newer coils and condensers are so prone to leaking, an old timer asked me why I didn't just swap the compressor, TEV, clean-out the lines and run 410A? I didn't even think about it before that day. I am shocked how well it has worked so far. So I am always curious why some techs use different "drop-ins" It is nice not having to change oils with R422B and R438B, that is why I use those two.
@@JeffsHVACAdventures Thank you for the response! I really enjoy your content and being a tech myself and business owner, getting other’s opinions help me. I have run them both and did not notice much difference either. Denver’s altitude and arid climate makes for an interesting change in pressures and output. We lose about 4% of output capacity for every 1000’ above sea level. I live about 6500’ in the suburbs, so we have to adjust for that. Thanks again and keep up the great content!!
I've tried to fill my R22 unit with 422D and thought that it was difficult to get the settings dialed in. There seems to be a huge lack of info for 422D but I'm a diy guy. Does 422B run similar as D? Or are they totally different animals? Thanks so much for any advice
Email me and I’ll let you know. I don’t really like to put pricing out there because what we charge here on the Eastern Shore of MD, might be a lot different what they charge in NY or FL. jeffshvacadventures@gmail.com
@@CustomWeldingandFab it still has been able to prove it works better with mineral oil than 422B trust me I have had better lasting compressor with 407c
Add 20% POE oil into the system on top of the mineral oil. Then use 407c and you’ll rarely ever have make any additional adjustments. But for that POS unit ,any option is a good one.
Temp compensation? It takes the rise or fall of temperature into consideration when your performing your pressure test and adjusts the delta T of your pressure so it looks like you haven’t dropped any.
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
SUPER discussion and execution. You are a master at this work. I wish you were my technician
since you just saved me a good amount of money.
Appreciate the compliment. 🤙
Yehhh it is what it is and it's a temporary measure the customer dictates the way forward considering its to get them through and its good business, super video on these two jobs excellent presentation of work. 👍👍👍 always very interesting with a good sense of humour.
Thanks brother!
I'm just some dufus home owner guy out there. But you are BADASS with your basic technicals and
also with your video processing. THANK YOU. My problem, which you are helping with, is my passed
fathers home unit. It's a R22 system and at least 30 years old. Major brand, I forget which right now.
Over the years I've already repaired - moving the drip conduit from the indoor blocked drain to the exterior;
the circuit board (which I got for $40 after waiting awhile) which had the spark igniter failure; the
condenser capacitor; the condenser exhaust fan; the handler fan (twice); and other minor maintenance.
The unit has been great on heat (after the control board replacement), no CO problems, but the cooling
function has gradually declined over 20 years. I recently became aware of the schrader valve thing and
this is where I want to compliment you. You are not afraid to share pertinent information. THANK YOU.
Your video CONFIRMS the idea of FUCK IT, REPLACE THE SCHRADERS - DO IT - DO IT NOW (The Matrix)
I observed your use of valve core removal tools and end hose cutoff valves, all which should be part of
any ACmaintenance regimen (THANK YOU). I now have possession of these tools. They are an integral
tool for any ac mechanic. They are not "neat" or "cool". They are essential (THANK YOU).
I now am "hunting for red october" for a local technician who knows what for on conversion from
R22 to R422B. My father left me some R22 but I don't know where it is now. And anything that can
reduce my costs to get the old unit running is valuable. Anything you could offer about oil calculations
would be nice.
THANK YOU
Once again - BADASS.
I appreciate all the compliments. Thank you very much. If you want to email me jeffshvacadventures@gmail.com for any specific questions, I’ll do my best to answer them for you. 🤙
@@JeffsHVACAdventuresYou're awesome for offering advice. Tough to find ppl like that
You're a good tech .... kick that junk off the roof !!
Lol. Thanks for watching brother!
422b runs low suction with r22 metering device. A larger piston will work or adjust txv open more. If not your saturated suction will stay under freezing.
Good point. I was right around 38° saturation temp when it was fully charged. And it had basically no load in the space. I felt pretty good with it after I finished.
I have a question if you dont mind? My heat pump was changed out to R422B.. I was charged $150 for each pound. That seems very high. I dont mind paying a reasonable markup but that seems excessive. Question: What is considered a reasonable markup. My markup seems to be 500% or more. Is that typical or should I be talking to the company?
Something to remember, every market is different. What I can buy and sell 422B for might not be what the contractor you used can get it for. Also Different regions have different mark ups. That being said, $150 per lb does seem a little high but if you call the company I’m sure they would be able to explain the mark up to you.
@JeffsHVACAdventures Hi Jeff! Thanks for your reply and I understand. I will give them a call. Thanks again!
for me R22 is 150 per pound. But other that 22 should be toching 100 or less per pound. this is NY@@JeffsHVACAdventures
Is this an air handling unit with fresh air? In my country i never seen ahu works on R410? It’s either split system or big ahu
This unit does have a small amount of fresh air. I believe 10% to meet building occupancy code.
Just out of curiosity and this is just a question and nothing more. Why use R422B over say MO99(R438B) or one of the others available? I know there are like 10-15 choices. I found R438B or 422B are the two best besides R22 itself. I still have two full R22 jugs for specific systems. But I have also been putting in new compressors and TEV's and using 410A since the coils for R22 are so stout and mostly copper, they work amazing, if you can find 5-ton condensers that are still good, the swap is quite affordable. So far I have done four and they are all pounding away just fine. The newer coils and condensers are so prone to leaking, an old timer asked me why I didn't just swap the compressor, TEV, clean-out the lines and run 410A? I didn't even think about it before that day. I am shocked how well it has worked so far. So I am always curious why some techs use different "drop-ins" It is nice not having to change oils with R422B and R438B, that is why I use those two.
No specific reason really. I’ve used M099 and didn’t find any issue with it. The 422B is just the most readily available in my area.
@@JeffsHVACAdventures Thank you for the response! I really enjoy your content and being a tech myself and business owner, getting other’s opinions help me. I have run them both and did not notice much difference either. Denver’s altitude and arid climate makes for an interesting change in pressures and output. We lose about 4% of output capacity for every 1000’ above sea level. I live about 6500’ in the suburbs, so we have to adjust for that. Thanks again and keep up the great content!!
How do you like that recovery machine? Have you tried the Apion G5 twin?
As always, great work Jeff 🤙.
Thanks man!
I've tried to fill my R22 unit with 422D and thought that it was difficult to get the settings dialed in. There seems to be a huge lack of info for 422D but I'm a diy guy. Does 422B run similar as D? Or are they totally different animals? Thanks so much for any advice
I haven’t used 422D. 422B seems to run a little lower suction pressure, but I haven’t had any issues with it.
Jeff, great video. Can you give me an idea what your company charges per lb. for 422B freon ?
Email me and I’ll let you know. I don’t really like to put pricing out there because what we charge here on the Eastern Shore of MD, might be a lot different what they charge in NY or FL.
jeffshvacadventures@gmail.com
You must have spent your 8-hour shift on this project. Do you prefer long jobs or several short jobs per shift?
I think I had a few different jobs in this same complex that day. It’s been a few months back now.
Great video!
Thanks!
We service close to 2 thousand systems have been topping r22 with r422d for years with no problems pressures close to r22
I’ve never had a problem either.
I would recommend use 407C better buddy, works much better than 422B for air conditioning even pressures are better
I live in Maryland as well & have had much better luck with 407C than 422B
407c is only compatible with poe oil
@@CustomWeldingandFab it still has been able to prove it works better with mineral oil than 422B trust me I have had better lasting compressor with 407c
Add 20% POE oil into the system on top of the mineral oil. Then use 407c and you’ll rarely ever have make any additional adjustments.
But for that POS unit ,any option is a good one.
@@ErickHernandez93where abouts? I’m looking to fill my R22 with an alternative as I’m being quoted way too much.
407c is the best replacement for r22
Hey ! What is temp conservation
Temp compensation?
It takes the rise or fall of temperature into consideration when your performing your pressure test and adjusts the delta T of your pressure so it looks like you haven’t dropped any.
I was quoted $200 per pound for R422b. So that's why I'm looking at all these videos.
That’s a little high for 422B but different locations have higher prices. We charge about half that per lb in Maryland
Any chance you’d come out to College Park, MD?
@@kevinstfort sorry buddy. That’s too far out of my service territory.
@@JeffsHVACAdventures I understand. Any recommendations for out my way? Would greatly appreciate it.