Thanks for the video! I watched it before replacing the clutch in a '06 Kia Spectra. If I hadn't seen your video first, I would have had a really bad day. Thanks again.
I have seen people pry on these style setups and wonder why it won’t come apart for hours 🤣 then we come Over remove the lever and poof transmission is separated 🤣 so fantastic video and hopefully it saves people some grief!!!
Thank you for sharing. Working on Changing my first clutch this week. It is an intimidating task, but videos like yours make it less scary. I just try to tell myself it's 1 bolt at a time and try not to bust my knuckles. Doing it on the ground in my garage has been interesting 🤣. Your tips were very helpful.
Amazing tips in this video! Thank you! This was one of the least fun clutch changes that I've done. I was able to juuuust separate the trans far enough from the engine to access the pressure plate bolts and remove clutch and pressure plate. As shown, the clutch alignment tool will fit this way if you trim it down. Again, just barely enough space to fit, but it works. Thanks for a great video!
I have a question for you, I send my Kia to the mechanic shop an before he change the clutch all the gears was working perfectly and after he change de clutch, the reverse stop working, do you have any idea what's wrong with it, I will appreciate your answer
I know this comments old but for anyone who need to know yes you should remove the Cv axles in order to slide the transmission over after lowering the front subframe bolts! So one can move the transmission far enough to replace the clutch
what is the piece called that shifts the transmission? it has like a fork on it, hooks to a cable, mine is bad but i dont know what its called and cant find one
Thanks for the video! I watched it before replacing the clutch in a '06 Kia Spectra. If I hadn't seen your video first, I would have had a really bad day. Thanks again.
I have seen people pry on these style setups and wonder why it won’t come apart for hours 🤣 then we come Over remove the lever and poof transmission is separated 🤣 so fantastic video and hopefully it saves people some grief!!!
Thank you for sharing. Working on Changing my first clutch this week. It is an intimidating task, but videos like yours make it less scary. I just try to tell myself it's 1 bolt at a time and try not to bust my knuckles. Doing it on the ground in my garage has been interesting 🤣.
Your tips were very helpful.
Amazing tips in this video! Thank you!
This was one of the least fun clutch changes that I've done.
I was able to juuuust separate the trans far enough from the engine to access the pressure plate bolts and remove clutch and pressure plate.
As shown, the clutch alignment tool will fit this way if you trim it down. Again, just barely enough space to fit, but it works.
Thanks for a great video!
Man, thank you so much I was stuck for two hours because of that silly Throw-out lever. Awesome Video!
Is there a special way to install it back together ?
Thank you I knew something was up when the transmission wouldn't slide off
Thank bro made my day a lot easier
Thank you fr being specific a to that throw it bearing ! Fighting with that Phuker. O m g. Anyway thank you!
I have a question for you, I send my Kia to the mechanic shop an before he change the clutch all the gears was working perfectly and after he change de clutch, the reverse stop working, do you have any idea what's wrong with it, I will appreciate your answer
No need to remove connection of transmission shift cable?
When you pulled the transmission apart from the block did you notice an engine ground coming off the main wire harness?
How long did this clutch take replace.
I realize this video is a few years old, but did you leave the CV axles in the vehicle during the clutch replacement? Thanks.
I know this comments old but for anyone who need to know yes you should remove the Cv axles in order to slide the transmission over after lowering the front subframe bolts! So one can move the transmission far enough to replace the clutch
Does this car have a polit bearing
Did you drop the frame any
32 bolt to remove socket?
Or 32 socket to remove bolt?
Thats really helpful am about to attempt the same on my Kia Sportage and was worried I'd have to remove the subframe etc..
Did you ever do it?
@@keithm5224 did you ever do it? i have the 4wd 2006 sportage and I only have 2 jack stands.
Where is the fill plug located?!
I'm doing the clutch on my 2004 Kia Spectra EX right now. I was worried weather or not I'd have to lower the subframe. Thanks for the info.
Awesome dude thanks
No problem it kicked my ass to figure it out figured others would have the same problem
I need your help sir I'm having problems putting back together
what is the piece called that shifts the transmission? it has like a fork on it, hooks to a cable, mine is bad but i dont know what its called and cant find one
Throw ot bearing lever.....phuk andvI fought for over two hours till I seen this video ....
Saved my ass from blowing this car off the ground.....
Thank you , very helpful
Did you pull the trans out completely?
Thank you. You're a life saver.
How much would ask to do this job for someone asking me! Fix it
1799.00
how did you know it was 2.0L instead of 1.8?
speechless00 it's listed on the cars emission label under the hood
I NEED SEE THE SECOND PART OF THIS VIDEO
Could i find a manual transmission for a kia spectra 2001
you sure can
Yes i am sure , i need a manual transmission for a kia spectra 2001. If u can check it for me contact me on 50940369019 on whatsapp
Thanx man
Just pulled it back far enough to remove and replace parts
Is there a special way to install it?