I am completely new to woodworking, and until I watched this very informative video I had no idea about the in's and out's of nail guns. Thanks to you and your information I can now go on the look out for what I think I will need with some confidence. Thank you so much for sharing your video.
Good explanation, thank you. Regarding clipped head nails, in some locations full head nails are code, clip head nails would not be code. Where contractors using not to code clip head nails the inspector would not pass the building; ouch let the rebuilding or re-nailing with full head nails begin. The concern is winds, full head hails hold better than clip headed nails. Always check your code.
@@ToolboxDIY I think it was mostly the yellow background...other YT tool channels have more of a jobsite, or project for a background...I feel that might do well? Just my suggestion 🤷♂️😅
I am not a "HE-MAN" so really needed this. Only the second video I watched and should have been my first. Now I won't bother with any others --- so excellent. Thank you. Now I need a circular saw and jigsaw...
I'm trying to fix my table and chair I feel confident now with the information I got form this video I'll be able to purchase the right nail gun thanks.
im looking to buy some gun to repair the rails on my deck, this video was so handy, next thing that I wish you explained more was the air compressor, I have a small one but it is not in PSI, but shows BAR, the adjuster on it doesnt seemt o do anything. But I did a check on a conversion table and 90 psi = 6.2 bar
Thank you for making this content, I found it incredibly useful and very well explained, the best, I to, have seen on TH-cam so far. Many thanks and kind regards from North London UK.
thanx for WELL thoughtout vid my first time in 62 years i find need to buy one building screened in deck i may need two but hope to $ave via DIY. and what great tools 2 have
👍🎯 🙂😃 You "NAILED" it, man !!! This was the VERY BEST and most THOROUGH demonstration and explanation I have yet found on TH-cam. I can't tell you haw much I appreciate it in my time of need for information ... 🙏THANK YOU 🙏
Kudos for your video. It explained in detail the various nailer guns n helped me select the right gun for my DIY project to repair many of my solid closet doors. Look forward to your next video. Maybe you can produce a video on battery operated nailer guns, which I'm seriously considering purchasing. Thanks.
It is a complex ecosystem. Cordless, compressed air, and whatever Paslode is. Choice between 21 and 30 degree nail guns? Plus other issues…. Will a 33 degree strip run in a 35 degree gun, etc.? And paper or plastic. And there are metal connecting guns for joist hangers and hurricane straps. There are cordless air compressors. I assume they can run nail guns? I don’t see CFM listed in product specs….. maybe I missed them. Cheers
Thanks for putting out this excellent teaching video. I found it very helpful. I do have a question for you -- for general diy work at home which might involve joining 1x dimensional lumber to plywood, what type of gun and what gauge should I get?
If I had to choose one nail gun to have around, I would probably go with a 16 ga angled finish nailer. 16ga has a decent amount of strength and the head isn't too large. The angled gun is more versatile since it can get into tighter spaces than a straight nailer.
Would that same gun be a good choice for a project that included replacing plywood soffit and patching a small amount of shingles? How about a Coil siding nailer?
For shingles, I would not use a finish or brad nailer. A coil roofing nailer is the way to go. These accommodate roofing nails that have a very large head needed for shingles. If the area is small enough, you could always do this by hand. A good roofing nailer isn't cheap. For the plywood soffit, you could use a 16ga finish nailer. A crown stapler would be a good choice here as well.
First, very nicely done !! This overview was great to watch. Precisely what I was looking for. What are your thoughts on pneumatic vs cordless? I've been looking at the Banks line from Harbor Freight. Like you said, they're a third of the price. What brand did you have in the video? Are they your personal tools? Thanks again for sharing your thoughts and videos, Rodney
I've only used a cordless once. It worked fine, but if the job was any larger, I don't think I would have enjoyed swapping out batteries and the cartridge that nailer required. If you only do light work, they are probably a good solution especially if you don't already own a compressor. The nail guns in this video were mostly Numax - a cheap brand. The framing nailer is a Porter Cable. I've since upgraded a few guns to Dewalt. I have no issue with Harbor Freight tools if you are only using them occasionally. If you have a large job or lots of jobs, those cheap brands probably won't hold up for very long.
Yes a crown stapler can be used for crown molding. But the reason it’s called a crown stapler is because of the crown in the Staples. A Brad Nails recalled because of the head design, pin nailer because of the design of the projectile also. It is the head Of the projector that determines the name of the tool
I would use the 16 ga. 18ga will likely work just fine, but baseboards can take some abuse thanks to kids and vacuums. So the extra strength of the 16 ga is worth the slightly larger hole. If the baseboards are thin and/or start splitting on you with 16 ga, then try the 18 ga.
Wolf6151 Go with a framing nailer. If you have a DEWALT 20 volt drill go with the DEWALT 20 volt cordless framing nailer. As long as you have a charged battery available it will fire nails all day long and no air hose or compressor to drag around. Ron
What are your thoughts on battery guns? Don't think I can adjust the nail impact for depth. Going to put up some tongue and groove. What would you suggest?
Hey I have a Dewalt 18 gauge finish nailer and it’s angled and I also have a Dewalt 18 gauge brad nailer. Can’t hardly see the difference other then ones angled ones not? What’s the difference thanks
If it is trim being attaching to drywall with wood behind it I would use a finish nailer (16 gauge). Nailing trim such as shoe molding to wood use a brad nailer (18 gauge). The holes are smaller. I have also used a brad nailer to attach trim to a wall but I used caulk on the back to act as a glue.
what gun would shoot 16d nails? I thought 16d is what we need for framing, im doing rafters 2x6s and will have to do blocking and put on roof sheathing, what gun u suggest?? im a diyer
Finish nails have more holding power as they are a larger gauge. This can sometimes be counter-intuitive because brads will typically have a larger head than finishing nails. Brads are good for very thin material or in cases where you need to temporarily tack something up before a different type of fastener is used. Also, if finish nails start splitting your material you can move down to the brads to possibly avoid the splitting.
I would use a framing nailer, if you have thick (3/4" or more) fence rails. If your rails are thinner, you might consider a fencing stapler (10.5ga). The brad nailer will work but I don't think you'll find the holding power to be enough. They'll hold just fine at first but once a bit of force is applied to the rail it could come out. A large dog could easily work out a rail that's only held with brads.
Thank you for this video. I got a small question - i need to install wooden plates on my walls. Can a nail gun penetrate regular walls made of blocks? its not concrete
i dont wanna sound stupid, but in Israel all construction blocks are made from the same material, so im not sure what u mean. these are completely regular building walls
I'm not familiar with the materials used in Israel. In the US, when we hear "blocks" that typically means concrete blocks. You said it wasn't concrete so what material are they?
im sorry, im pretty ignorant about this subject and the English words to describe it. Yes, the blocks are made of concrete, but in Israel when we say concrete it means the supporting walls of a building, full of concrete. So yeah, hollow blocks of concrete
Okay, now I understand. Thanks for clarifying. A framing nailer can definitely penetrate a concrete block, however, the nails don't hold in the block very wall. Also, there's a risk that you might crack the block. I would recommend drilling into the block and using either a screw designed for concrete or a concrete anchor. There are many options out there.
I wouldn't use a nail gun for prehung doors. 3" screws in predrilled holes is the way to go(drilled with a tapered bit and countersink). It will allow you to countersink the screws and then fill those in with a paintable caulk. One challenge with nails is that if you don't get the door plumb, it's a lot harder to back out the nail to make adjustments. If you insist on using a nail gun, I would go with a 15ga finish nailer - one that can accommodate 2-1/2" nails. Another difference between screws and nails is spacing. With 3" screws you probably use 3-4 on each side of a standard door (more if using solid doors). Nails need to be spaced about 16" apart on both sides. If you go with a split jam door, the 15ga nails aren't a bad option and probably just as good as screws. You'll need to install nails in both the main and split jambs and then drive a nail through the door stop (which goes through both the main and split jambs). After you get your doors installed, don't forget the trim. You could use the same 15ga gun but with shorter nails (twice as long as the trim thickness) or you could go with a smaller head size and use an 18ga gun. Good luck!
Prices are all over the map. You can get a three piece set from a big box store for as little as $120. If you only use them occasionally, this can be a cost effective approach. If you go with the professional tools, you can pay over $400 per nail gun. I've upgraded a number of my guns and have paid about $150-200 per nail gun.
Finally, an American who's not on speed or just overhyping everything. It was a pleasant surprise.
One of the best explanation videos I've seen on TH-cam (and I've seen many). Thanks for a clear explanation with not a lot of non-essential narrative.
I am completely new to woodworking, and until I watched this very informative video I had no idea about the in's and out's of nail guns. Thanks to you and your information I can now go on the look out for what I think I will need with some confidence. Thank you so much for sharing your video.
This is the best guide on nail guns on youtube and the internet , excellent job
Perfect example of a quick and clear explanation.well done and thank your
This was a very informative overview of the topic. I learned a lot, very helpful. Thank you very much!
Good job done. Very useful informations thank you very much.
This is how a TH-cam video should be done! Great job, very informative. Thank you. you have a new subscriber.
Good explanation, thank you. Regarding clipped head nails, in some locations full head nails are code, clip head nails would not be code. Where contractors using not to code clip head nails the inspector would not pass the building; ouch let the rebuilding or re-nailing with full head nails begin. The concern is winds, full head hails hold better than clip headed nails. Always check your code.
This was very informative and easy to follow. I learned a lot. Thank you for this training session.
Very helpful and informative video. I can't imagine why anyone would give this a thumbs down. Thank you for the video.
Best video I found for pneumatic nail gun overview on TH-cam! Thanks! :)
The thumbnail is not even close to doing this video justice. Extremely informative and full on explanation of the topic. Glad I found it.
Glad it was helpful. Perhaps I should reconsider the thumbnail...."Everything you need to know about nail guns!" Is that too much?
@@ToolboxDIY I think it was mostly the yellow background...other YT tool channels have more of a jobsite, or project for a background...I feel that might do well? Just my suggestion 🤷♂️😅
my 1st exploration into nail guns and your presentation was very informative and easy to understand.
Very well explained. Finally got the idea behind the different nail sizes and applications. Thanks
Thank u very much for this video it was very helpful for me to select the proper nail gun for my home project.
Glad it helped! Good luck with your project.
Fantastic review, I have learned so much by watching this video. Bravo!!
I am not a "HE-MAN" so really needed this. Only the second video I watched and should have been my first. Now I won't bother with any others --- so excellent. Thank you. Now I need a circular saw and jigsaw...
Glad it was helpful!
Perfect video for the DIY guy like me. Thank you !
Exactly what I needed years later!!! Thanks!
I'm trying to fix my table and chair I feel confident now with the information I got form this video I'll be able to purchase the right nail gun thanks.
im looking to buy some gun to repair the rails on my deck, this video was so handy, next thing that I wish you explained more was the air compressor, I have a small one but it is not in PSI, but shows BAR, the adjuster on it doesnt seemt o do anything. But I did a check on a conversion table and 90 psi = 6.2 bar
Wow! I finally understand nail guns, thank you.
Thank you for making this content, I found it incredibly useful and very well explained, the best, I to, have seen on TH-cam so far. Many thanks and kind regards from North London UK.
Thanks for the compliment! I'm glad you found this useful.
thanx for WELL thoughtout vid my first time in 62 years i find need to buy one building screened in deck i may need two but hope to $ave via DIY. and what great tools 2 have
Great information, thanks for educating me before I start a big project.
I now know about nail guns. Thank you so very much for a well thought out video.
👍🎯 🙂😃 You "NAILED" it, man !!! This was the VERY BEST and most THOROUGH demonstration and explanation I have yet found on TH-cam. I can't tell you haw much I appreciate it in my time of need for information ... 🙏THANK YOU 🙏
Best overview by far. Great job!
Kudos for your video. It explained in detail the various nailer guns n helped me select the right gun for my DIY project to repair many of my solid closet doors.
Look forward to your next video.
Maybe you can produce a video on
battery operated nailer guns, which I'm seriously considering purchasing. Thanks.
Nice overview, best one I have seen thus far.
Found this very helpful. Thank you so much.
Thanks
Thank you. This was really, really helpful
Good job, this was exactly the info I was looking for, thanks !
Great overview and brought up issues I was not aware of.
Very clear and informative video well done!
- Thank you for a thorough overview. VERY helpful.
Glad it was helpful!
definitely giving a thumbs up for this one. well done.
Thank you! Cheers!
This was SUPER helpful! Thank you, sir!
thanks. good start
Excellent video
Very helpful, thanks 👍
I need to do wood siding and maybe fencing and probably roof shingles which one do you recommend maybe for all 3 or 2 of the above thanks
fantastic..helped me understand the difference now
Great informative video sir! Thanks
It is a complex ecosystem. Cordless, compressed air, and whatever Paslode is.
Choice between 21 and 30 degree nail guns? Plus other issues…. Will a 33 degree strip run in a 35 degree gun, etc.?
And paper or plastic.
And there are metal connecting guns for joist hangers and hurricane straps.
There are cordless air compressors. I assume they can run nail guns? I don’t see CFM listed in product specs….. maybe I missed them.
Cheers
I have no preference. I'd go with the one that is lighter in weight.
Great information
Thank you for the information.
Any time!
Good clear demonstration...
Thanks for putting out this excellent teaching video. I found it very helpful. I do have a question for you -- for general diy work at home which might involve joining 1x dimensional lumber to plywood, what type of gun and what gauge should I get?
If I had to choose one nail gun to have around, I would probably go with a 16 ga angled finish nailer. 16ga has a decent amount of strength and the head isn't too large. The angled gun is more versatile since it can get into tighter spaces than a straight nailer.
Would that same gun be a good choice for a project that included replacing plywood soffit and patching a small amount of shingles? How about a Coil siding nailer?
For shingles, I would not use a finish or brad nailer. A coil roofing nailer is the way to go. These accommodate roofing nails that have a very large head needed for shingles. If the area is small enough, you could always do this by hand. A good roofing nailer isn't cheap.
For the plywood soffit, you could use a 16ga finish nailer. A crown stapler would be a good choice here as well.
Nice, thanks!
Excellent explanation!
Thank you! Very informative.
Damn fine nail gun video
Thank you so much!
Thank you!
You're welcome!
Excellent
Great presentation. Can you do one on battery guns? Thank you.
Hi! I have a craftsman 18454 and the part where the nail comes out fell off. Do you have a tutotial to put it back? Thanks
very helpful-thank you!
BLESS YOU ........U R THE MAN.
First, very nicely done !! This overview was great to watch. Precisely what I was looking for. What are your thoughts on pneumatic vs cordless? I've been looking at the Banks line from Harbor Freight. Like you said, they're a third of the price. What brand did you have in the video? Are they your personal tools? Thanks again for sharing your thoughts and videos, Rodney
I've only used a cordless once. It worked fine, but if the job was any larger, I don't think I would have enjoyed swapping out batteries and the cartridge that nailer required. If you only do light work, they are probably a good solution especially if you don't already own a compressor.
The nail guns in this video were mostly Numax - a cheap brand. The framing nailer is a Porter Cable. I've since upgraded a few guns to Dewalt. I have no issue with Harbor Freight tools if you are only using them occasionally. If you have a large job or lots of jobs, those cheap brands probably won't hold up for very long.
Thank you
Very informative !!! Thank you
My pleasure!
Thank you.
Well done. Thank you!
Good vid. Thanks!
Thx
Thanks great information
appreciate the intel the video
Very good review
Yes a crown stapler can be used for crown molding. But the reason it’s called a crown stapler is because of the crown in the Staples. A Brad Nails recalled because of the head design, pin nailer because of the design of the projectile also. It is the head Of the projector that determines the name of the tool
What is the best type of gauge for installing baseboards that you would recommend? I was figuring 18 or 16?
I would use the 16 ga. 18ga will likely work just fine, but baseboards can take some abuse thanks to kids and vacuums. So the extra strength of the 16 ga is worth the slightly larger hole. If the baseboards are thin and/or start splitting on you with 16 ga, then try the 18 ga.
thanks
Great video..
Good vid by the way.
What type of nail gun and what size nail would you recommend for wood fence building? Thanks.
Wolf6151 Go with a framing nailer. If you have a DEWALT 20 volt drill go with the DEWALT 20 volt cordless framing nailer. As long as you have a charged battery available it will fire nails all day long and no air hose or compressor to drag around.
Ron
What are your thoughts on battery guns? Don't think I can adjust the nail impact for depth. Going to put up some tongue and groove. What would you suggest?
My nailer wont shoot , so how to fix it pls assist
Execellent video
Hey I have a Dewalt 18 gauge finish nailer and it’s angled and I also have a Dewalt 18 gauge brad nailer. Can’t hardly see the difference other then ones angled ones not? What’s the difference thanks
I need a nailer to secure trim to the wall, followed by nailing shoe molding to the colonial trim. What do you recommend?
If it is trim being attaching to drywall with wood behind it I would use a finish nailer (16 gauge). Nailing trim such as shoe molding to wood use a brad nailer (18 gauge). The holes are smaller. I have also used a brad nailer to attach trim to a wall but I used caulk on the back to act as a glue.
can someone tell me the spacing of the nails for an 18 and 16ga nailer?
What kind of gun would i need for making pallets
Framing nailer. The other fasteners wouldn't provide enough holding power for a typical pallet.
what gun would shoot 16d nails? I thought 16d is what we need for framing, im doing rafters 2x6s and will have to do blocking and put on roof sheathing, what gun u suggest?? im a diyer
Can a 16 gauge finish gun be used for a wooden fence?
I wouldn't use that small of a gauge for an exterior fence. A framing nailer would be better suited for the job.
What the difference between Brad and finish nail?
Finish nails have more holding power as they are a larger gauge. This can sometimes be counter-intuitive because brads will typically have a larger head than finishing nails. Brads are good for very thin material or in cases where you need to temporarily tack something up before a different type of fastener is used. Also, if finish nails start splitting your material you can move down to the brads to possibly avoid the splitting.
So for a backyard fencing, I would use the third one right?
I would use a framing nailer, if you have thick (3/4" or more) fence rails. If your rails are thinner, you might consider a fencing stapler (10.5ga). The brad nailer will work but I don't think you'll find the holding power to be enough. They'll hold just fine at first but once a bit of force is applied to the rail it could come out. A large dog could easily work out a rail that's only held with brads.
Tackles any job
No 16 gauge nailer ?
Thank you for this video. I got a small question - i need to install wooden plates on my walls. Can a nail gun penetrate regular walls made of blocks? its not concrete
From what material are the blocks made?
i dont wanna sound stupid, but in Israel all construction blocks are made from the same material, so im not sure what u mean. these are completely regular building walls
I'm not familiar with the materials used in Israel. In the US, when we hear "blocks" that typically means concrete blocks. You said it wasn't concrete so what material are they?
im sorry, im pretty ignorant about this subject and the English words to describe it. Yes, the blocks are made of concrete, but in Israel when we say concrete it means the supporting walls of a building, full of concrete. So yeah, hollow blocks of concrete
Okay, now I understand. Thanks for clarifying. A framing nailer can definitely penetrate a concrete block, however, the nails don't hold in the block very wall. Also, there's a risk that you might crack the block. I would recommend drilling into the block and using either a screw designed for concrete or a concrete anchor. There are many options out there.
Looking to replace all the prehung doors inside my house. Which nailgun would you recommend?
I wouldn't use a nail gun for prehung doors. 3" screws in predrilled holes is the way to go(drilled with a tapered bit and countersink). It will allow you to countersink the screws and then fill those in with a paintable caulk. One challenge with nails is that if you don't get the door plumb, it's a lot harder to back out the nail to make adjustments. If you insist on using a nail gun, I would go with a 15ga finish nailer - one that can accommodate 2-1/2" nails.
Another difference between screws and nails is spacing. With 3" screws you probably use 3-4 on each side of a standard door (more if using solid doors). Nails need to be spaced about 16" apart on both sides.
If you go with a split jam door, the 15ga nails aren't a bad option and probably just as good as screws. You'll need to install nails in both the main and split jambs and then drive a nail through the door stop (which goes through both the main and split jambs).
After you get your doors installed, don't forget the trim. You could use the same 15ga gun but with shorter nails (twice as long as the trim thickness) or you could go with a smaller head size and use an 18ga gun.
Good luck!
imagine this gun in call of duty you could nail people to things
Price ranges?
Prices are all over the map. You can get a three piece set from a big box store for as little as $120. If you only use them occasionally, this can be a cost effective approach. If you go with the professional tools, you can pay over $400 per nail gun. I've upgraded a number of my guns and have paid about $150-200 per nail gun.
Yo where can I get that DeWalt M4 Nailer? Lol but really
good job, just get a bit more lively sometime cause i feel like i'm dozing off
Don't ever tell a Yank to liven up. There's to many overhyped in your face Yanks in this world.
For a sec I thought he looks like john wayne gacy.
Younger Kane Hodder