I bought this exact kit 3 years ago and didn't get around to installing it today. This video answered a lot of questions that the instructions failed to answer. Thanks!
+JD Gleason Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
This was very helpful thank you.....but why did you really need to remove the air box since you went under the driver wheel well to run the wires anyway? And you did all that work without giving us a final visual of it all together and on the ground working.....
+JKM Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Very good video I watched several times. I’m trying to figure out how to hook up Winjet flood lights on my 2019 Sentra but I’m not sure how to hook up from the fuse block. Any suggestions would be appreciated.
if like you said in the beginning, the S trim has the harness there already, does that mean you can just plug and play and not mess with the firewall and fuse box and stuff?
If my car is already prewired for fog lights, can I just unpin the connector from this kit and attach it onto the wiring harness already in the car? The connector in the car is too wide for my switch, but it is just 4 wires, so I think it should be possible
@@mousajassam3778 Yep. At first I thought that I had one fog light plug on the driver side (idk why), but I found another on the passenger side attached to the coolant tank. The plugs were a bit short, but I managed to attach them to the fog lights, so I'm sweet. I also had to buy a new turn signal lever with the fog light option, but it wasn't a hassle.
First, you need a new switch with the fog light option on it. Then, after you have your kit and switch, just attach the H11 plugs on the driver and passenger sides to the fog light housings and then you should be good, provided that your plugs are not corroded.
@@AaronTheEagle1 if they aren’t corroded, then just take the wires that we’re already there for fog lights, plug the fog lights in and just wire it up like he did for the button?????
@@AaronTheEagle1 like what do I do with the wire that plugs into the fog light button? The one is ground and the one that connects to the fuse, what do I do with the yellow wire that’s in that same wire set
+Yony Rivas This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com
I know this video is 5 years old but the only thing you have to do is just buy a turn signal/light switch if you have fog light wires from the factory only the V6 models have the factory switch on they turn signal/light switch
I have a 07 Nissan Altima this morning I turned the lights on they were working then went off. Now the only option that works is the last one on the dial. Do you know where I should be investigating
+Alex Canaca This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
I hate those little plastic snap things I broke a few Each time I have to change my oil filter i gotta take the plastic shield off from under the wheel to get to the filter I was considering switching to some small screws or something & just removing all the plastic push clip thingys
I was going to ask that! Thank you btw did you use the lights from the video or a different brand? Also do they stay on while you drive or only when you put the setting on?
At 58:25 you start wiring the red wire into a wire sleeve connector into a fuse jumper. That fuse jumper didn’t come in the kit so what would you suggest when you don’t have that jumper?
The jumper is unnecessary and forces u to use the fog lights the same time the headlights on. Connect it straight to the battery you can cut the fog lights on and off with ease. It comes with its own fuse and relay.
We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com +William Ramirez
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I no longer want fog lights on my 2012 altima after watching this. What a ton of work for some lights..
I bought this exact kit 3 years ago and didn't get around to installing it today. This video answered a lot of questions that the instructions failed to answer. Thanks!
+JD Gleason Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I like this guy. He really brings life to his videos tutorials just with his articulations. Keep up the good work mane.
Man great video...seems like a lot of work lol I'll just watch this a few more times 😄
This was very helpful thank you.....but why did you really need to remove the air box since you went under the driver wheel well to run the wires anyway? And you did all that work without giving us a final visual of it all together and on the ground working.....
Explain in detail, and the technician is professional. Rare talents. like!
+WENLONG TAN Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
...I learned a LOT of patience with this video 😆 .great job
After all that, you should offer a Final Exam we could all take!
Ikr
Just purchased the kit, and honestly such a good video. Kept me engaged the whole way through, will have to watch again once I receive the kit.
+JKM Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
I learn a lot from you guys, thanks, not just about cars but patience.
Like how you said you were going to install it with what came with the kit and end up using a fuse jumper, thought you'd be splicing the wires
Why did you take out the air box assembly?
Why did you add a 7.5 amp fuse as well as a 15 amp fuse in the jumper?
Very good video I watched several times. I’m trying to figure out how to hook up Winjet flood lights on my 2019 Sentra but I’m not sure how to hook up from the fuse block. Any suggestions would be appreciated.
I'm just curious to know if you put a bulb on the connection already there will it light up when you turn on the lights?
if like you said in the beginning, the S trim has the harness there already, does that mean you can just plug and play and not mess with the firewall and fuse box and stuff?
I'm wondering the same. Would make the job so easy
If my car is already prewired for fog lights, can I just unpin the connector from this kit and attach it onto the wiring harness already in the car?
The connector in the car is too wide for my switch, but it is just 4 wires, so I think it should be possible
Since my Altima is already prewired for fog lights, do I have to remove all of that crap inside the engine bay?
Yo did u end up installing it?
@@mousajassam3778 Yep. At first I thought that I had one fog light plug on the driver side (idk why), but I found another on the passenger side attached to the coolant tank. The plugs were a bit short, but I managed to attach them to the fog lights, so I'm sweet. I also had to buy a new turn signal lever with the fog light option, but it wasn't a hassle.
U need a switch the one come in ur steering if come prewired if u dont want to use it them u need to do like the video
No, as you probably know by now.
@@AaronTheEagle1 okay so if mine is already prewired then how would I add the fog light switch?
I want to install fog lights for Nissan kicks 2023, is the same process???? 🤔thanks
How would the install work if the Altima was pre-wired like in the video? How would you install the switch and power the fog lights?
Kayak Fish TV if it’s pre wired then purchase the switch and add the fuse to the correct cavity if not already installed
@@YungCaliber15 would you wire the switch to the fuse?
First, you need a new switch with the fog light option on it. Then, after you have your kit and switch, just attach the H11 plugs on the driver and passenger sides to the fog light housings and then you should be good, provided that your plugs are not corroded.
@@AaronTheEagle1 if they aren’t corroded, then just take the wires that we’re already there for fog lights, plug the fog lights in and just wire it up like he did for the button?????
@@AaronTheEagle1 like what do I do with the wire that plugs into the fog light button? The one is ground and the one that connects to the fuse, what do I do with the yellow wire that’s in that same wire set
Do you know if it is the same process for 2015 Nissan Rogue?
+Yony Rivas This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com
1A Auto Parts thank you for informing me
I know this video is 5 years old but the only thing you have to do is just buy a turn signal/light switch if you have fog light wires from the factory only the V6 models have the factory switch on they turn signal/light switch
Nice video would like to see the lights come on after they were installed
Thank you for the information, this video very Useful
I have a 07 Nissan Altima this morning I turned the lights on they were working then went off. Now the only option that works is the last one on the dial. Do you know where I should be investigating
Nice video would like to see the lights work
How much does something like this cost if you take it to a shop?
Thanks for the video. And wow I have a 2012 Nissan Altima and there's no rust on mine like this one has.
Do you have video for 2016 nissan altima
GREAT ALTIMA.
Well i was gonna add it but
I love you wero ❤ thank you so much
Do y'all have a fog light kit for a 2010 Nissan rogue?
How to make those fog lights work independently and not with the headlights? Little help here please
Only if it was possible to hire u so u can install dem on my 06 Altima seem alot of disassembly
Will this be same procedure for Nissan altima 2015 ?
+Alex Canaca This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
You Can use my car anytime for your videos lol
I hate those little plastic snap things I broke a few Each time I have to change my oil filter i gotta take the plastic shield off from under the wheel to get to the filter
I was considering switching to some small screws or something & just removing all the plastic push clip thingys
my 2009 had the factory harness under the bumper I just installed a factory stalk on the steering wheel
I was going to ask that! Thank you btw did you use the lights from the video or a different brand? Also do they stay on while you drive or only when you put the setting on?
If you put the wiring at LO why it turns on only with high beam?
+IFoundMyUsername Thanks for watching! The fog lights came on with the low beam, which is the bulb that is more outboard in the headlight assembly.
awesome 👌🏾
I don't understand the benefit of airbox and battery removal here.
Do you have branches in middle east
What jumper is that
Hi where can I get The fuse jumper please thank you
Any auto parts store...
Amazon
just watched the entire video and I don't even own a altima 🤷🏾♂️
Everyone gets a 10 .. untill u loose the 10mm 😂🤣🤣
Hahaha. Not so funny when you lose your only 10 you haven’t lost yet and your shits still all taken apart 😩
At 58:25 you start wiring the red wire into a wire sleeve connector into a fuse jumper. That fuse jumper didn’t come in the kit so what would you suggest when you don’t have that jumper?
The jumper is unnecessary and forces u to use the fog lights the same time the headlights on. Connect it straight to the battery you can cut the fog lights on and off with ease. It comes with its own fuse and relay.
easy to do
what was the point of taking off the whole air box? like genuinely, i feel like i missed the reason for that
Forgot to pull the engine out too
Shake, rattle, roll
Thing I’ll just take the easiest way and rig a targo switch lol. Maybe hide the wiring
Tail light somked pathfinder 97 vende a puerto rico
Penetrant on bolts in plastic? I mean I doubt that’s necessary😆
+Darby Drake Thanks for the feedback!
How to put four light in a Toyota colora 2007
We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com +William Ramirez
Can find you to finish my please come do mine
too much damn work ill just pay you to do it
2 hour video hahaha
Nissan is suck for the DIY MECHANIC! I won't buy a Nissan car again!