I found out for myself, and for anyone else that was also wondering. The light kit works, in ALL modes, including reverse lights in reverse, with my new Mamba X. Pretty awesome light kit!
I added this dragon light kit to my TRX. The one thing I missed in the video, is after hooking everything up, you have to use the selector to turn the lights on - and select the brightness. I could not figure out why the lights were not coming on. :) One other note is that you need to have the throttle set to 50% forward and 50% reverse. Otherwise, the 70/30 split option will have the reverse lights on when the truck is in neutral. The lights look great and put out a lot of light. A great addition.
I'm new to this rc stuff, which makes it hard to understand what you are doing. I will save this video and hopefully be able to follow along and make it work.
The light bar I ordered last year did not come with the 3D printed bracket shown in this video. It did come with other brackets that do not fit. I don't want to punch holes in the body to mount it and the correct way is to use the roll cage to mount. I just don't understand why my light bar did not come with those brackets.
@@MyTrickRC I did send an e-mail and was told that I would be getting getting a set of the roll cage 3D parts but I never received tracking and never received the parts.
Very helpful video! I have a couple of questions for you. I want to cut the controller button cable, add connectors, and mount the button on the roof behind the light bar to make changing modes a lot easier. Do you see any problems with doing that and do you have any tips or suggestions in doing so?
Hi! I'm looking to purchase this kit from your website. One thing that's confusing me - does the controller differentiate between brake and reverse? I'm guessing not? If it doesn't, it won't affect my decision to buy the kit, only if I should purchase both red brake and white reverse running lights, as opposed to just brake lights. Thank you 👍
How does this work with the Castle creations cc bec 2.0? I see there are two unused plugs/ connectors on the Dragon Receiver harness. Castle says to disconnect the red wire off the speed control, so how does this affect the dragon unit? Any help wounld be great. The Castle bec is the waterproof unit and has two leads coming from it to go to the receiver , it's getting cramped in the receiver box already lol.
I think this is an awesome kit! But, does adding the lights + wiring not compromise the waterproof electrics? What I'm asking is can you still wade through bonnet/Hood deep water?
All servo connections should be as waterproof as all of the other servo connections inside the receiver housing. Regarding power there are two types of connection options, the balance port version which comes standard with the kit, or we also offer an inline "pass through" power tap which improves water resistance by connecting via JST connector. In either case, the water can penetrate the connector, and we do recommend protecting that connection as much as possible. We also recommend avoiding full submersion if possible, but the Dragon itself should not be damaged by it if you do.
I bought the DG1BR233039 for my Bronco. That install video led me to this video which is a variant with the light bar. It isn’t the same kit but I’d assume the programming would be the same as the light bar in this video is just an additional light. I’ve managed to get all the lights to work and figured out the long/short press config for the headlight brightness but my brake lights & reverse won’t work. I’ve tried reprogramming the DG1 on the 5th mode numerous times, unplugged the 2cell balance port and I’m split on the channel 2 throttle as instructed. It’s also setup the exact same way as this video shows in regards to the the led strands port locations. Any ideas, or maybe this one is defective?
MyTrick RC will do asap. Thanks for the reply!! Aside from that minor issue they’re awesome. I dig the high, mid and low beam feature too. It helps out quite a bit when taking photos.
How would this work with a different brand esc? I've been planning on getting this but also have an esc upgrade in mind, so I'm wondering about compatibility.
It should work. On rare occasions we've seen weird interactions between different ESC/ vehicles But overall 99% of customer installations are issue free, both stock and custom builds.
I found out for myself, and for anyone else that was also wondering. The light kit works, in ALL modes, including reverse lights in reverse, with my new Mamba X. Pretty awesome light kit!
Thanks!
I added this dragon light kit to my TRX. The one thing I missed in the video, is after hooking everything up, you have to use the selector to turn the lights on - and select the brightness. I could not figure out why the lights were not coming on. :) One other note is that you need to have the throttle set to 50% forward and 50% reverse. Otherwise, the 70/30 split option will have the reverse lights on when the truck is in neutral. The lights look great and put out a lot of light. A great addition.
Good feedback, thanks Chris.
It‘s the best Light-Kit I‘ve ever owned!!
Thank you!!
Thanks!
VERY helpful video. Thanks!!! :) THIS THING ROCKS......I also got the optional ROCK LIGHTS.......UH-Mazing
I'm new to this rc stuff, which makes it hard to understand what you are doing. I will save this video and hopefully be able to follow along and make it work.
Yes, if you have questions you can email us also.
I have bought and used the LED's for my airplanes, they are AWESOME....sure these for the Traxxas can be as well
My reverse light it not switching off fully? Any tips? I have tried to redo throttle calibration but no luck.
The light bar I ordered last year did not come with the 3D printed bracket shown in this video. It did come with other brackets that do not fit. I don't want to punch holes in the body to mount it and the correct way is to use the roll cage to mount. I just don't understand why my light bar did not come with those brackets.
Please send us an email from the contact on our website. We are happy to send you a set.
@@MyTrickRC I did send an e-mail and was told that I would be getting getting a set of the roll cage 3D parts but I never received tracking and never received the parts.
Very helpful video! I have a couple of questions for you. I want to cut the controller button cable, add connectors, and mount the button on the roof behind the light bar to make changing modes a lot easier. Do you see any problems with doing that and do you have any tips or suggestions in doing so?
Hi! I'm looking to purchase this kit from your website. One thing that's confusing me - does the controller differentiate between brake and reverse? I'm guessing not?
If it doesn't, it won't affect my decision to buy the kit, only if I should purchase both red brake and white reverse running lights, as opposed to just brake lights. Thank you 👍
How does this work with the Castle creations cc bec 2.0? I see there are two unused plugs/ connectors on the Dragon Receiver harness. Castle says to disconnect the red wire off the speed control, so how does this affect the dragon unit? Any help wounld be great. The Castle bec is the waterproof unit and has two leads coming from it to go to the receiver , it's getting cramped in the receiver box already lol.
Please can you Help me ?
I have install this beautiful light System but My Reverse light is permanent working :(
I think this is an awesome kit! But, does adding the lights + wiring not compromise the waterproof electrics? What I'm asking is can you still wade through bonnet/Hood deep water?
All servo connections should be as waterproof as all of the other servo connections inside the receiver housing. Regarding power there are two types of connection options, the balance port version which comes standard with the kit, or we also offer an inline "pass through" power tap which improves water resistance by connecting via JST connector. In either case, the water can penetrate the connector, and we do recommend protecting that connection as much as possible. We also recommend avoiding full submersion if possible, but the Dragon itself should not be damaged by it if you do.
does it have a signal also, going to left or right?
This version does not, however, our other version (sku MTK-TD1) that uses the UF-7 Lighting Controller does have turn signals.
Is this light kit compatible with other ESCs, like the Mamba X?
is it waterproof?
Do you have a kit for the TRX4 Blazer ? I am running the HW 1080 Esc.
I bought the DG1BR233039 for my Bronco. That install video led me to this video which is a variant with the light bar. It isn’t the same kit but I’d assume the programming would be the same as the light bar in this video is just an additional light. I’ve managed to get all the lights to work and figured out the long/short press config for the headlight brightness but my brake lights & reverse won’t work. I’ve tried reprogramming the DG1 on the 5th mode numerous times, unplugged the 2cell balance port and I’m split on the channel 2 throttle as instructed. It’s also setup the exact same way as this video shows in regards to the the led strands port locations. Any ideas, or maybe this one is defective?
Hi, can you send us an email to: info@mytrickrc.com We would like to see some pics of your wiring at the receiver.
MyTrick RC will do asap. Thanks for the reply!! Aside from that minor issue they’re awesome. I dig the high, mid and low beam feature too. It helps out quite a bit when taking photos.
@@monkfry Yes, we had the same experience. Thanks for your support!
I did everything how you show up but now, the esc led is flashing green and the reverse light are turn on when the trx4 is neutral.
Thanks
Hi, Did you adjust the TRX4 ESC to option 5?
So it doesn’t do brake lights correct I see the running lights but no break before you went into reverse
Correct, this kit only does rear tail lights, and reverse. Our UF-7 kit for the TRX4 has both brake lights and reverse.
I have the light kit dg-1 on my trx4... but i have juste the reverse light open on 3 mode.
And the running light dont work...
What is the problem???
Hi Yanik, please check your email. Thanks.
Will this work on a 3S battery?
Yes it works with 2S and 3S batteries.
How would this work with a different brand esc? I've been planning on getting this but also have an esc upgrade in mind, so I'm wondering about compatibility.
It should work. On rare occasions we've seen weird interactions between different ESC/ vehicles But overall 99% of customer installations are issue free, both stock and custom builds.
How do I use this with the integrated balance connector battery that came with my trx4?
On our website under "Customize your RC" you can buy a Traxxas Power adapter that lets you tap power straight from the battery. The cost is $4.95
Looks great. Do you need 3s lipo for this or is 2s lipo also oké? And where can I order the kit?
This system works off 2cel or 3cel Lipos, either one is equally good. We have them on our website, there is a link on the home page.
MyTrick RC oké thanx. How about shipping costs to Europe?
It varies, you can try processing using our site. Some places we are able to ship it free, others could be $6 or $10
MyTrick RC Thanx. Last question, does the kit come with a manual instruction?
Yes it has an instruction manual included
So How do you plug it in with using a traxxas battery?
Hi We have a battery adapter for Traxxas : www.mytrickrc.com/shop/traxxas-power-adapter/
So can you not use a traxxas brand lipo?
On our website we sell a Traxxas battery adapter. It taps power directly off your battery.
can you use a traxxas battery I cant figure out how to conect it
Hi We sell a special adapter to tap power off a Traxxas Battery. You can find it here: www.mytrickrc.com/shop/dragon-lighting-system/
We have a Power Adapter on our website to tap power off a Traxxas Battery. Here's a link: www.mytrickrc.com/shop/traxxas-power-adapter/
Are these lights waterproof?
Yes they are.
👍👍👍👍👍👍👍
i have a TRX-4 but its lifted and i only got it for £170 and it costs £450 from stock lucky me (: