Thanks for the helpful video. FYI I have the Ultegra Di2 8150, with that one you won't need to install an extra Di2 shimano wireless unit. It's already integrated.
My Garmin shows 60% of battery level, however I am sure the battery is full. Like in this video, which is excellent by the way. It helped me mount my sensor etc, but ihave no idea about solving the problem
Hello. Thanks it was very interesting. I have an additional question. Do you know if we can get DI2 information (Gear position) in Garmin file? Explode DI2 data in Garmin GPS ?
recently, i had left (didn't disconnect) my 2024 12 speed 105 di2 system connected with the garmin edge 830 and this resulted in draining the battery of 2024 12 speed 105 di2 system fully. This also drained the battery of the left lever. Have you experienced this type of phenomenon ? please advise... thanks!
Should I disconnect the di2 sensor whenever not in use? Or is turning off the garmin enough? I want to make sure I don’t drain the di2 battery. Thanks for your help.
Thank you for the video. Is there a way to program the wireless unit to stay on the whole time you are riding? Mine only seems to come on when I stop a ride or if I go in and manually find it and connect. It should be on the whole time correct?
I’ve seen a number of reports where people have temporarily bricked their DI2 system for a while when installing the EW unit - I think the issue happens when updating the firmware. Can you just plug it in and connect it to the Garmin without having to use the Shimano iOS app.
Another option for the wireless unit is the Shimano Di2 XT SC-MT800 display. It displays the gear selection and battery level and provides ANT+ and Bluetooth connectivity. Also replaces the Di2 junction box and provides for a nice charging port.
Good morning friend, I would like you to help me with a problem that I have with my Garmin edge 830, I stopped communicating with my 11v Etap, which indicated the gear combination, battery report, etc. But about a month ago I stopped communicating with my Garmin Edge 830, that is, I did not see it again on my device, the most curious thing is that it works perfectly, that is, it makes the changes well, they go up and down perfectly. Could you tell me how I solve this problem, thank you very much I remain pending.
It should be pretty much the same except you'll use the buttons on your garmin for setup rather than the touchscreen. 530 and 520 can both display di2 data - see gamins compatibility list here -support.garmin.com/en-GB/?faq=qBnD0bXiLT7g6qMyExVRc9
I have watched tis several times. Its very good but in my opinion you go way too quickly. The transition between setting up the DI2 buttons and selecting which items to display in the screen is very confusing.
This is awesome!!! I just got the new 840 with slightly different layout.... but your video worked perfect! Thanks!!!
just got my 830 your video helped me immensely, thanks!
Glad I could help!
Thanks man!! Great explanation. I have a 530 but with this video, i could easily get it connected.
Thanks for the helpful video. FYI I have the Ultegra Di2 8150, with that one you won't need to install an extra Di2 shimano wireless unit. It's already integrated.
It's freakin awesome! I just did mine and it's perfect!
Very helpful. Thanks so much!
Really good job on the video. Thank you.
Thank you for the video. Exactly what I was looking for.
Glad it was helpful!
Great video, very helpful. Answered a lot of questions I had. Keep up great work.
Glad it helped!
You're a good teacher👍
My Garmin shows 60% of battery level, however I am sure the battery is full. Like in this video, which is excellent by the way. It helped me mount my sensor etc, but ihave no idea about solving the problem
Thank you! Well done and very helpful.
Glad it was helpful!
Nice instructive video: much appreciated. Thanks for the effort, and be well.
Glad it was helpful!
Shimano Di2 12 speed rear derailure has BR/ANT built it but the 11 speed does not so it requires the EW-WU111 ... correct?
good work! very clear.
Does this work with DI2 105 without top buttons? Just to show battery status and gear selected?
Hello. Thanks it was very interesting.
I have an additional question. Do you know if we can get DI2 information (Gear position) in Garmin file? Explode DI2 data in Garmin GPS ?
very helpful, thank you very much
recently, i had left (didn't disconnect) my 2024 12 speed 105 di2 system connected with the garmin edge 830 and this resulted in draining the battery of 2024 12 speed 105 di2 system fully. This also drained the battery of the left lever. Have you experienced this type of phenomenon ? please advise... thanks!
Great video. However, on my 530 it only shows 11 gears for Di2. How do I get to 12 gears? Thank you.
Should I disconnect the di2 sensor whenever not in use? Or is turning off the garmin enough? I want to make sure I don’t drain the di2 battery. Thanks for your help.
Thanks. It helped a lot.
Why do I have to manually connect to Di2 everything I start a new ride?
Excellent video
Glad you liked it
Good video, thanks!
Nice video.thanks.
And how to do on the button 1. flipping the garmin screen 2. Transmission up 3. Transmission down?
Thank you for the video. Is there a way to program the wireless unit to stay on the whole time you are riding? Mine only seems to come on when I stop a ride or if I go in and manually find it and connect. It should be on the whole time correct?
great news for me, thanks
My Garmin 540 is fully charged and also is my new Ultegra Di2. But they cannot find eachother. Someone knows what to do ?
On edge 1000 it s ok? We have the same functionality? Thanks
Nice presentation , very helpful , many thanks !
Glad it was helpful!
I’ve seen a number of reports where people have temporarily bricked their DI2 system for a while when installing the EW unit - I think the issue happens when updating the firmware. Can you just plug it in and connect it to the Garmin without having to use the Shimano iOS app.
Another option for the wireless unit is the Shimano Di2 XT SC-MT800 display. It displays the gear selection and battery level and provides ANT+ and Bluetooth connectivity. Also replaces the Di2 junction box and provides for a nice charging port.
Good morning friend, I would like you to help me with a problem that I have with my Garmin edge 830, I stopped communicating with my 11v Etap, which indicated the gear combination, battery report, etc. But about a month ago I stopped communicating with my Garmin Edge 830, that is, I did not see it again on my device, the most curious thing is that it works perfectly, that is, it makes the changes well, they go up and down perfectly. Could you tell me how I solve this problem, thank you very much I remain pending.
Does it work with xtr di2 ?
Enjoy your vids...very informative. Could you please provide the link to the video regarding the di2 wireless unit. Thanks
Thanks for the feedback 👍 I have the di2 wireless unit installation filmed and just need to edit - should be done sometime in the next week.
Can i do the same process and see the same data with the 530 or 520 ?
It should be pretty much the same except you'll use the buttons on your garmin for setup rather than the touchscreen. 530 and 520 can both display di2 data - see gamins compatibility list here -support.garmin.com/en-GB/?faq=qBnD0bXiLT7g6qMyExVRc9
Thanks
I have watched tis several times. Its very good but in my opinion you go way too quickly. The transition between setting up the DI2 buttons and selecting which items to display in the screen is very confusing.
Thanks Mark - polite, constructive feedback always appreciated👍