Dude! Thank you!! I was getting my mom's car ready to sell and it had a slow window. I was dreading digging into the problem when I found your video. It was having trouble going down so, just as you said, I put silicone lube on the rear seal. It worked perfectly and save me a lot of headache and time. Thanks for taking the time to put this video up. Cheers
Thanks! I did this and it worked. I had slow windows for years thinking it was the motor going bad so did nothing. Tried your solution and its so good to have working windows again.
Thanks everyone I went to auto zone bought the variety clip plugs they jus fit over glass n snap into place. the door window has one in the rear n one in the front which are located in the window guide the kit was $5 I had a little difficulty taking it apart patience is required it took me about two hours bt I did it .window rolls up n down no problem if u didn't know that these had snaps to hold glass in place
This video might help me out. I left my windows down and the car got rain inside. After a few days they stopped working and wouldn't roll up along with the radio that's been cutting in and out now. Didn't know if maybe my windows are sticking? We've checked all fuses multiple times. Put a new switch on and didn't do anything! Please help me out!! No out cam figure out the problem. Was a cold ride to work this morning :)
Mine hangs up when trying to raise it.It bogs down but eventually comes up .Already broke switch and had to replace switch assembly.It binds toward back of driver window.Maybe your spray will help.Thanks for video. \
Quick question - my wipers don't work on my 1997 Park Avenue - it has a new motor. When I put it on high, they go up halfway, and don't move anywhere after that, not up or down. Any idea what it could be? Thanks.
What if the rivet has already gotten worn out? I haven't opened the door up yet, but your description of what would happen fits what's happening with mine. Is that also a simple fix or is it more expensive?
I have a 1988 buick park avenue drivers door window that fell forward while rolling down there is a whole in the glass and black window clip that snaps in I have tried to clamp in place but when rolled down it falls forward again please help
Hey, if that Clip fell out. You need to replace it. It is cheap plastic that snaps. I would go to a local car store and try and match it up with some they might have on the wall. I'm sure they'll help you out and if no luck, pull one off a car at the boneyard.
@@mrwarmonga Another video shows how to get a rubber grommet the right size to fit the hole in the glass and install a bushing in the center to then use a small bolt thru the bushing hole to afix the glass to the regulator glass holder permanently. Use locktite on the bolt threads so it won't come undone with the minor torque needed to prevent cracking the glass. On your own as to sizes to use but it looks to be a solid fix for plastic parts unobtainable to a very large degree in the first place.
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 7](http://i.ytimg.com/vi/FOIiws4XMGQ/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | คู่รักแซฟฟิก "หลิงหลิง - ออม" จากซีรีย์ "ใจซ่อนรัก"](http://i.ytimg.com/vi/zs8AfphGn2w/mqdefault.jpg)
Dude! Thank you!!
I was getting my mom's car ready to sell and it had a slow window. I was dreading digging into the problem when I found your video. It was having trouble going down so, just as you said, I put silicone lube on the rear seal. It worked perfectly and save me a lot of headache and time. Thanks for taking the time to put this video up.
Cheers
Thanks! I did this and it worked. I had slow windows for years thinking it was the motor going bad so did nothing. Tried your solution and its so good to have working windows again.
I've tried this and it WORKS ! My Windows stick every winter , and I do this and it works great ! Up down very fast ! Woo hoo .
Thanks everyone I went to auto zone bought the variety clip plugs they jus fit over glass n snap into place. the door window has one in the rear n one in the front which are located in the window guide the kit was $5 I had a little difficulty taking it apart patience is required it took me about two hours bt I did it .window rolls up n down no problem if u didn't know that these had snaps to hold glass in place
Thanks buddy,helped us out!
thanks man!! i have 2002 and the liquid wrench idea is great! will try it soon
-1
Awesome thanks so much...Liked and subscribed
Wow, saved me $$$. Thank you!
Dude your awesome, thanks much
This did the trick, thanks!
What about the clips holding the window to the regulator ? If broken is there a kit ?
This video might help me out. I left my windows down and the car got rain inside. After a few days they stopped working and wouldn't roll up along with the radio that's been cutting in and out now. Didn't know if maybe my windows are sticking? We've checked all fuses multiple times. Put a new switch on and didn't do anything! Please help me out!! No out cam figure out the problem. Was a cold ride to work this morning :)
Mine hangs up when trying to raise it.It bogs down but eventually comes up .Already broke switch and had to replace switch assembly.It binds toward back of driver window.Maybe your spray will help.Thanks for video.
\
White lithium grease has worked better and lasts for years. In the summer the silicon based lubes run, the lithium stays put.
Quick question - my wipers don't work on my 1997 Park Avenue - it has a new motor. When I put it on high, they go up halfway, and don't move anywhere after that, not up or down. Any idea what it could be?
Thanks.
Jake Thompson check the fuse if not already
What if the rivet has already gotten worn out? I haven't opened the door up yet, but your description of what would happen fits what's happening with mine. Is that also a simple fix or is it more expensive?
I have the same issue. I have read that you can cut the rivet out, and replace it a bolt. And it will fix it as good as new.
My '99 Park Avenue has the same problem.
I have a 1988 buick park avenue drivers door window that fell forward while rolling down there is a whole in the glass and black window clip that snaps in I have tried to clamp in place but when rolled down it falls forward again please help
Hey, if that Clip fell out. You need to replace it. It is cheap plastic that snaps. I would go to a local car store and try and match it up with some they might have on the wall. I'm sure they'll help you out and if no luck, pull one off a car at the boneyard.
Deborah Juarez. Did u ever fix that clup issue on ir lesabre. I have the same problem here
@@mrwarmonga Another video shows how to get a rubber grommet the right size to fit the hole in the glass and install a bushing in the center to then use a small bolt thru the bushing hole to afix the glass to the regulator glass holder permanently. Use locktite on the bolt threads so it won't come undone with the minor torque needed to prevent cracking the glass. On your own as to sizes to use but it looks to be a solid fix for plastic parts unobtainable to a very large degree in the first place.
No excuse for the poor engineering.