Compressor Before or After Drive? | Bass Tone Tuesday
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- On this episode of #BassToneTuesday we show the differences between having a compressor before and after a drive pedal!
Origin Effects Cali76 Compact Bass: • Origin Effects Cali76 ...
Tech 21 YYZ: • Tech 21 YYZ Geddy Lee ...
=============================
Subscribe to my channel
=============================
► bit.ly/2BLwbeT
=============================
Stay in touch
=============================
► Instagram: / ivanbassist
► Facebook: / ivanbassist
=============================
Gear I Use to Make Videos
=============================
►Mesa Engineering WD-800 + Subway 1x15" Cab
►Noble Amps Preamp
► Rupert Neve RNDI
► Focusrite Clarett 4pre
► Sommer Cables
► Lakland Skyline 44-64 Custom w/ EMG GZR pickups
► Dingwall Guitars Super J
► Sony a6400 Camera
► SE Electronics SE4 Small Diaphragm Condenser Mic
► Logic Pro X
Great video and explanation. Compression position is like EQ, it’s about taste and preference. I tested mine at different places in my pedal board and I can tell you that you have to tested and use your ears to know where you want it. If you have different basses, same thing, tested switching bass. I have a 9 pedal pedalboard including the compressor : tuner, ls2 for blending dry with a overdrive and a fuzz pedal that are in the loop of the ls2… then ls2 go to a wah, reverb, delay, pre-amp di. I’ve tried the compressor at the end, in the middle (after the wah) that was my first thought where it should go, but was finally the worst place, kind of tone suck my dirt pedals… I’ve tried in the ls loop to have it blend, so try 1st, middle & last, but dind’t like it after I’ve tried before (after the tuner) and it’s where the compressor finaly being placed. Like you I prefer to have my signal compressed ealier and keep a more consistent signal when I add effect in the signal. Also easier when I switch basses from single coil to humbucker or active, I just have play with the level of my compressor to adjust from a bass to another…
Well said! Specially the last part about switching basses!
I give myself both options with one overdrive before the compressor for more dynamic songs and one after the compressor for where im picking hard the whole song
Wrathchild! I have a compressor that is “at home” on either side of the overdrive, or even in the effect loop of the amp. I find it’s more useful when set as a “peak limiter” when placed after the drive. But I use it as a mild 4:1 comp before O.D. Great videos, thx Ivan!
Which comp do you have? Thanks for watching, Andrew!
Keeley Bassist. Similar to the Cali in how you can use the light to set threshold, but not as many features. It’s funny, but we have a lot of gear in common- Mesa head, Mesa 15 and 12, subway di, G&L instruments, yyz pedal. I think since we like the same stuff, I’ll recommend the Vulcan bass overdrive to you. It’s my always on sound that you use the darkglass for. It brings amazing midrange without messing with your bass’s natural sound.
just yesterday after band practive i had a thought about putting compressor after drive, very timely video) thanx
😄😄 cool! Let me know which one you like better!
@@IvanBassist so... now that i checked it with my setup i see that it really works both ways, but i prefer to have compressor (empress) first and then drive (vintage microtubes)
Nice! I usually have it at the beginning of the chain, too
Funny, but coincidentally today I tried a dirt pedal (TC Mojo Mojo) on a low gain, Geezer-sounding setting, but put on the spectra comp on my TC combo amp, after. Sounded good; I can dig in and get more drive by playing harder, but the frequency response and overall level stayed consistent. Pretty cool sound.
Nice! A little bit of dirt is always useful 😁
I'm super jealous of that Duck Dunn candy apple red bass
It’s a great bass! The main downside is that it is HEAVY
Really useful video on compression. I have a Hyper Luminal and stick it at the end of the chain. Always on. I just tweak the ratio to suit the gig.
Yea I have an optical /tube and love it
It really take some nasty mids out of the signal and sweetens things
I drive a micro amp into it
Signal chain > wah > sub > fuzz > qtron > hxstomp > micro amp > guru comp > nemesis delay > amp
I’ve tried running the hx last and this way sounds substantially better idk if it the output impedance of the nemesis or combo of that and comp after
But I love what I’m getting atm
You gave a great explanation of how it affects first or last, great video man.
Thanks! Glad you liked it!
This is soo helpfull, well explained.
Thank you!
Thank you for watching :)
I keep my Boss OD before Ampeg Opto-Comp to keep the drive variation. But I have a Scrambler in the effects loop (as it's shown in the SCR-DI and BA circuits-after the preamp). The Scrambler really seems to thrive in the higher post-pre-amp gain but there seems to be something about it being there that still let's it react to dynamics pretty well. But with the kind of OD it is, I do want it to be more consistent than the Boss OD. So I get options. (I use the Scrambler more because it's milder and fits into way more situations, kinda has a tube power section vibe).
I use the Billy Sheehan Pedal which combines clean and distortion. It has a compressor as the last step so it’s after distortion but this pedal is first in my chain. Since it’s set to low gain it probably acts as first in the chain. I’ve got a boost pedal after it.
That one is a great pedal!
Your topic is always very interesting.I love your channel!👍
Thank you, Shuji!
i realize I'm kind of off topic but do anyone know of a good place to stream newly released series online ?
@Luke Lennon i watch on Flixzone. Just search on google for it :)
@Luke Lennon I watch on flixzone. Just search on google for it =)
Put one before and one after any effects pedal that changes or alters the tone you are trying to achieve say for example put one also after your EQ.
It can be nice to have the comp after fuzz to give some bounce back to the notes and even drive the comp
Hermano, escuché tu acento y supe que hablábamos español ggg
Hace un par de años que me hice de un overdrive y recientemente por fin mi compresor, estas semanas han sido de ver cual posicionar antes o después, tu video me resolvió mi duda existencial jaja suscrito!
Muchas gracias, Rapha! Que bueno que el video te haya ayudado 💪🏽
This is exactly what I was looking for! Thanks :D
good Ivan, you just explained what was needed. Really helpful
Happy to help!
Great video brother! Thanks for sharing. Nice playing too!
Thank you, Rich!
Thank you. I learned quite a bit from this video.
Que bueno! Saludos 🤘🏽
Wonderful, thanks for sharing your knowledge.
Glad it was helpful!
Thanks a lot! Very Helpful.
Before or after or before and after? (@7:13 Ah, there's when you suggested before and after). I know the SGT-DI's variable one-knob compressor comes AFTER the tone controls and SGT circuit. I am skeptical about the usefulness or effect of that compressor, but I plan to try putting my OE Cali76 Compact Bass in front of an SGT-DI, using the one-knob compressor at the back end.
Great video thank you 🙏🏽
Thanks for watching, Phil!
great explanation as always...
Thanks for watching!
Amigo disculpa que no sé mucho inglés. La ventaja de el compresor antes esque te da mas salida pero menos dinámica y el overdrive antes es que es menos salida y más control? Creo que ese entendí 😅.
Hola! Si pones el overdrive antes del compresor vas a poder controlar mas la dinamican y como responde el drive a tu toque y el compresor va a mantener el volumen mas constante.
Si pones el compresor antes del drive, el drive va a responder de manera mas constante a tu toque y va a mantener el volumen parejo :)
Hi Ivan. Recently, I bought a NU-X MLD Bass Preamp+DI. I also run a TC Electronic Hypergravity compressor on my pedalboard. Would you place the comp first in the signal chain?
That depends on what you want to achieve with the compressor
this video is YES :)
where do u like ur oc2 b4 or after od pedal ?
I’ve got a video about that coming too 😁
Sounds way better before
crack segui asi
Wrathchild 🤘
Awesome track 😎
You want it infront of your signal chain and at the end of it.
the tone I'm going after is MESHUGGAH (for life) and bass tuned @ 432 hz (forever)
Bass tuned to (u guessed it) Meshuggah tuning
F A# D# G# C#
Bass to
1) Boss TU3 Tuner, to
2) Ebs compressor, to
3) Boss Metal zone (after this video) (high gain closer to bass), to
4) Ibanez Tube Screamer (guitar) to'
5) DOD Death Metal Pedal, to
6) Darkglass B7K,to
7) US Metal 21 rectifier to
8) Ibanez Bass Tube screamer (TS9B),to
9) Boss Bass Overdrive, to
10) Boss Bass Equalizer, to
11) Zoom B3 bass processor, to
12) Noise gate and finally to
13) EBS Amp / headphones.
I still have to tweak this up a bit, rearrange the order and let' 's see how that goes.
Which bass do you have? 😁
432 is meaningless btw