UPDATE- Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT. Please check out these links that may SOLVE YOUR NO START ISSUES. amzn.to/3tvM0jd amzn.to/3xUrWKX amzn.to/3uuLxiA amzn.to/3erjviy Analyze your car issues and ERROR codes and clear them with this Amazingly accurate yet inexpensive OBD2 SCANNER- amzn.to/33rovxg Wireless Scanner amzn.to/3nYbjtb Test your Battery and Alternator amzn.to/2QWtGCU If you would like to help this channel, your donations are appreciated. Cashapp- $PeterLCG Venmo- PeterLCG THANK YOU
I've been having intermittent "no crank" issues with my 2013 Ford Edge for 5 years - we bougt it new. For Christmas 2022, I got myself a MPC remote start kit. I had an issue programming it that i think revelaed the problem. To program the remote start you need both keys. First time I tried it did not want to take. But eventually I got the remote starter installed and it does work. Now whenever I put the key in and I get a no crank I will try the remote start and it works every time. That leads me to believe that the transponder in one of my keys is bad. It's probably the reason that it would took longer to program the remote start. And the fact that it starts reliably every time with the remote start even when the key will not it is an indicator to me that it is the transponder in the key fob.
I think you just solved my problem too, I’ve got a 2014 edge that did the same thing, it only came with an aftermarket key with no chip I put a new starter in it and nothing changed so I might just run a remote start cause a new programmed key I was told is $500
An auto parts (starter, alternator, etc.) rebuilder does far more than 'just fixes that one thing' as you put it. Don't know who blew smoke up your behind, BUT when received, they competely disassemble all of the component parts, the electrical parts, stator windings, rotors, brushes, etc. are separated, housings and other hardware are then chemically cleaned and media blasted if needed, the windings and rotors are also cleaned, values measured, and tested, rotors have commutators (part the brushes contact) cleaned and resurfaced, or rewound and new commutator installed, Same for stator windings, cleaned tested, new windings installed if needed, new bearings, and new solenoid, e If needed. They tend to fail if not PROPERLY repaired, or adjusted correctly on assembly. THIS IS DONE BY PEOPLE - that get paid more for volume - some can do it right, others, whose parts come back too many times get fired. Just like a new factory part, they can be 'dead out of the box' but less often as factory parts are under more watchful eyes to not lose their parts contracts. CHEAP, BAD rebuilders used by some parts suppliers cut corners- cheaper grades of wire, smaller wire, cheap bearings, etc. If you and friends get several bum rebuilt parts by same trade name- change your parts store- a Parts Store exec once told me he would NOT use his company's rebuilt parts - said they found the cheapest rebuilders then hounded them to further cut their costs, to the point their rebuilt parts were garbage.
.... I don't have time to listen to all this. If there's a point in there somewhere I missed it and I can't keep listening. We get it dude: your car isn't starting.
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
UPDATE-
Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT.
Please check out these links that may SOLVE YOUR NO START ISSUES.
amzn.to/3tvM0jd
amzn.to/3xUrWKX
amzn.to/3uuLxiA
amzn.to/3erjviy
Analyze your car issues and ERROR codes and clear them with this Amazingly accurate yet inexpensive OBD2
SCANNER- amzn.to/33rovxg
Wireless Scanner
amzn.to/3nYbjtb
Test your Battery and Alternator
amzn.to/2QWtGCU
If you would like to help this channel, your donations are appreciated.
Cashapp- $PeterLCG
Venmo- PeterLCG
THANK YOU
It was the battery. Thanks for replying. Son gave me a jump start, then a visit to Auto Zone.
Wtf is this dude talking about?
Who, what, when, why, and how, is all we need to know. Not that extra talking...stop making videos
I've been having intermittent "no crank" issues with my 2013 Ford Edge for 5 years - we bougt it new. For Christmas 2022, I got myself a MPC remote start kit. I had an issue programming it that i think revelaed the problem. To program the remote start you need both keys. First time I tried it did not want to take. But eventually I got the remote starter installed and it does work. Now whenever I put the key in and I get a no crank I will try the remote start and it works every time. That leads me to believe that the transponder in one of my keys is bad. It's probably the reason that it would took longer to program the remote start. And the fact that it starts reliably every time with the remote start even when the key will not it is an indicator to me that it is the transponder in the key fob.
I think you just solved my problem too, I’ve got a 2014 edge that did the same thing, it only came with an aftermarket key with no chip I put a new starter in it and nothing changed so I might just run a remote start cause a new programmed key I was told is $500
So what was it?
For people asking it was *The Starter* that was bad
what did you have to do to fix it ?
So the starter was the problem? I change my starter on my 2014 ford edge and still nothing! 🤒
Did u fix it?
@@Btotheain13I didn't fix it
@@Btotheain13 This guy don't know 💩💩💩
You talk to much
An auto parts (starter, alternator, etc.) rebuilder does far more than 'just fixes that one thing' as you put it.
Don't know who blew smoke up your behind, BUT when received, they competely disassemble all of the component parts, the electrical parts, stator windings, rotors, brushes, etc.
are separated, housings and other hardware are then chemically cleaned and media blasted if needed, the windings and rotors are also cleaned, values measured, and tested, rotors have commutators (part the brushes contact) cleaned and resurfaced, or rewound and new commutator installed,
Same for stator windings, cleaned tested, new windings installed if needed, new bearings, and new solenoid, e If needed.
They tend to fail if not PROPERLY repaired, or adjusted correctly on assembly. THIS IS DONE BY PEOPLE - that get paid more for volume - some can do it right, others, whose parts come back too many times get fired.
Just like a new factory part, they can be 'dead out of the box' but less often as factory parts are under more watchful eyes to not lose their parts contracts.
CHEAP, BAD rebuilders used by some parts suppliers cut corners- cheaper grades of wire, smaller wire, cheap bearings, etc. If you and friends get several bum rebuilt parts by same trade name- change your parts store- a Parts Store exec once told me he would NOT use his company's rebuilt parts - said they found the cheapest rebuilders then hounded them to further cut their costs, to the point their rebuilt parts were garbage.
WHat was the fix? I believe it would be the starter....But I would like to know.
My 2913 ford edge sel 3.5 v6 does a no crank no start off and on but when it wouldn’t start today I stuck it in neutral, and it started right away
Get to the point dude talks too much
You waste my time,thanks
.... I don't have time to listen to all this. If there's a point in there somewhere I missed it and I can't keep listening. We get it dude: your car isn't starting.
Part of the problem is auto stop engine every time you stop during commute. Shortening the life
My issue was the key. It got wet
How did you fix it
@@DarryshaBitch You have to buy a new key
My ford edge car . There is massage strting systm fault what can i do
That's the chip in your key
Ignition module
Want start from the switch but will jump from the starter but want fire
My dashboard lights are on. Car won't crank. Lights won't go off. Stressed
Check your battery or try getting a jump. Make sure your battery terminals are tight and clean.
If you spend 7 horas is clear that you dont know what you was doing time is money right next time take it to the shop
Worst video ever
Get to the point man
Thanks for wasting more of our time. Just delete this video
👎🏾👎🏾👎🏾👎🏾👎🏾