I really appreciate that. Yes…the only downside is that it will shorten the life of the cable. I think it’s smooth as it is and dry silicone spray on the guide rods makes it even smoother.
There is a guy selling the stand alone powertec lat pulldown with the weight stack for 1k in my area. I was going to pick it up but I decided to order the one from titan fitness with the 300lb stacks
How easy/convenient is it to take off the top portion of the cable machine and add the weight stack to it? I own a 2014 model Powertec lat machine and I'm just now gonna add the stack to it for convenient's sake and to spare me using up more 45s (will free up more for my leg press). The content and your advice/quick replies have been helpful, I've subscribed to your channel.
Thanks so much. I don’t think it’s too bad. If you’re relatively handy, I don’t see why it would take more than 2 hours. 1 hour if you’re really good at assembling equipment.
@@Charlietales2022 they are. The Lat Tower I had connected to my old PT Smith Machine got used nearly everyday for almost 10 years and the new owner says it’s still going strong.
@@HomeGymHacksandReviews good to know. The pulleys I have on the valor Ft look like they’re starting to wear out. I am glad I am switching functional trainers.
I just asked this question on one of your other videos but I’ll ask on here too. I just bought this Machine and they are telling me the utility bench will solve my issues but from the looks of this video you are NOT getting into the correct position to flat bench because of the prongs on the knee pads. I’m 5’8 not a tall guy. Is this a design flaw or is there a way around it if I buy the powertec workbench ?
You are correct. The prongs do get in the way on flat press. I shared this feedback with Powertec a couple years ago. I can’t remember if the bench fits, but try turning it the other way and facing in for flat press.
Would it be difficult to do lat pull downs with a general bench pushed in? I fancy the lat tower but I have a different bench and I’m not sure if there could be a height issue as the rollers seems relatively fixed in terms of their height?
I used this lat pulldown attachment and my old red bench for years. The only issue with getting a full range of motion is using an attachment that hangs low. A standard lat bar, mag grips, etc., should be good.
So I have the space for the Lat Tower, but I already own the Lever Gym. Other than saving time reconfiguring and loading/unloading plates on the LG, would I gain anything by adding the Lat Tower to my setup?
I’m debating between the smith or the leverage gym but cannot make up my mind. Since you have both, if you had to choose one, which one would you choose?
I have a question for you with regards to the multi system powertec. I know you love your powertec levergym but what can you say about the multi system powertec?
I have never used the multi system. If someone said you can have a free Levergym or free Multi-System, I would take the Levergym even though it’s less expensive.
Thank you. Yes, it will fit the 1/2 Rack, but you will need to add a connector piece at checkout. I have never used the 1/2 Rack, but it should not impact any other functions. Rather, it will add a lot of stability and versatility to the rack.
@@HomeGymHacksandReviews it will probably feel identical to your lat tower only difference being it has the seat which u can swivel out to the side to perform low rows and tricep bicep movements. I also have the weight stack which I think is well worth the extra money for convenience. Keep up the great reviews 👍I love powertec stuff and am slowly building up my gym mainly with their equipment.
my current machine is horns only, can i use the weight stack plus the horns to do between 250 and 300? Or is it an either or? I need higher weight for things like seated back row.
There is a 500 pound max weight capacity and Olympic plates and the plate stack can be used in conjunction. During a few exercises in the video, you will be able to see where I use both. I mainly use the weight horns for 2 2.5s when I need a weight between plates on the stack.
It all depends on what attachment you are using (ie how low it hangs from the pulley). Also, when the bench is placed in the decline position rather than the flat position, that will give you a greater ROM.
So can I add a lat pull down weigjt stack attachment to a powerteck squat rack and does weigjt stack lat pull down comes with the pegs on side? What's the weigjt of weigjt stack?
Yes, this Lat Tower can be added to the Power Rack, Half Rack, and Roller Smith. There are no band pegs, but hopefully they will be included in future editions. The entire stack is 200 pounds and you can add plates on the horns for a max weight of 500 pounds. It is a 1:1 pulley ratio.
@@HomeGymHacksandReviews ok so weigjt stack is 1:1 ratio right? On website is says 190lbs weigjt stack though. so what do you think between rp 4000 with weigjt stack lat pull down attachment or powertec half squat with powerttec weigjt stack lat pull down attacwnt?
For the Powertec the stack is 190 and the carriage is 10 pounds and 1:1 pulley ratio. I have not used a Rep rack, but everyone who has one seems to love it.
Do you think.i can use the selectorized powertech lat pull down for belt squats? Since the seat moves out of the way it looks like you can stand rigjt under low pulley?
Some companies offer assembly and sometimes if you order products through a 3rd party seller they will assemble it at a pretty hefty fee. The only piece of equipment I have that challenged me is the Streamline Functional Trainer. I don’t think most machines are too difficult if you have a good socket set and wrench set.
The weight horns built in is just an amazing feature, can’t believe every company isn’t doing this.
I agree! And Powertec has had this design in place for 20 years or so.
Great addition to the roller Smith Machine! Thank you for your thorough reviews!
Thanks so much!
this was excellent informative and exactly what i was looking for. Thank you
I appreciate that. Thank you.
I always like the design and would definitely get it with the rack if I had one
Hey Reynaldo! Agreed. It really opens up a lot of additional exercises.
Thats a great addition for sure..Some really great options..I would have a field day in your gym "gyms" lol..have a good day!!
Thanks so much, Mike!
Hey Coach nice thorough review👌🏼👌🏼👌🏼
Thanks so much! 🙌
You know I love the comparison... Your three lat machines 😂👍
lol! I like going with what I know.
Making me jealous bro. I want all of this!!!
Appreciate it, Luke!
i saw so many of your powertec review or hack videos!
can it be upgraded to aluminum pulley?
i think it will be perfect with that.
I really appreciate that. Yes…the only downside is that it will shorten the life of the cable. I think it’s smooth as it is and dry silicone spray on the guide rods makes it even smoother.
There is a guy selling the stand alone powertec lat pulldown with the weight stack for 1k in my area. I was going to pick it up but I decided to order the one from titan fitness with the 300lb stacks
That was a pretty good deal on the Powertec. Basically getting the stack for free.
That is certainly one of Titan’s best pieces.
How easy/convenient is it to take off the top portion of the cable machine and add the weight stack to it?
I own a 2014 model Powertec lat machine and I'm just now gonna add the stack to it for convenient's sake and to spare me using up more 45s (will free up more for my leg press). The content and your advice/quick replies have been helpful, I've subscribed to your channel.
Thanks so much. I don’t think it’s too bad. If you’re relatively handy, I don’t see why it would take more than 2 hours. 1 hour if you’re really good at assembling equipment.
When I buy the functional trainer and lat tower attachment I’ll use your link.💪
Greatly appreciated! Thank you!
@@HomeGymHacksandReviews the pulleys look durable.
@@Charlietales2022 they are. The Lat Tower I had connected to my old PT Smith Machine got used nearly everyday for almost 10 years and the new owner says it’s still going strong.
@@HomeGymHacksandReviews good to know. The pulleys I have on the valor Ft look like they’re starting to wear out. I am glad I am switching functional trainers.
I just asked this question on one of your other videos but I’ll ask on here too. I just bought this Machine and they are telling me the utility bench will solve my issues but from the looks of this video you are NOT getting into the correct position to flat bench because of the prongs on the knee pads. I’m 5’8 not a tall guy. Is this a design flaw or is there a way around it if I buy the powertec workbench ?
You are correct. The prongs do get in the way on flat press. I shared this feedback with Powertec a couple years ago. I can’t remember if the bench fits, but try turning it the other way and facing in for flat press.
Another great video. Thank you.
Thank you!
Would it be difficult to do lat pull downs with a general bench pushed in? I fancy the lat tower but I have a different bench and I’m not sure if there could be a height issue as the rollers seems relatively fixed in terms of their height?
I used this lat pulldown attachment and my old red bench for years. The only issue with getting a full range of motion is using an attachment that hangs low. A standard lat bar, mag grips, etc., should be good.
So I have the space for the Lat Tower, but I already own the Lever Gym. Other than saving time reconfiguring and loading/unloading plates on the LG, would I gain anything by adding the Lat Tower to my setup?
Not much. The Levergym has about a 2:1 ratio with a 300 pound weight capacity. The Lat Tower is 1:1 with a 500 pound weight capacity.
Have you reviewed the leg press attachment for the work bench yet?
I have not. I’ve had 2 of the LP attachments over the years. I think it’s okay for higher rep / lower weight sets.
Thanks for the video!
Thanks for watching!
Nice Review.
Thank you!
I’m debating between the smith or the leverage gym but cannot make up my mind. Since you have both, if you had to choose one, which one would you choose?
Levergym.
I have a question for you with regards to the multi system powertec. I know you love your powertec levergym but what can you say about the multi system powertec?
I have never used the multi system. If someone said you can have a free Levergym or free Multi-System, I would take the Levergym even though it’s less expensive.
@@soniama5246 for me, many reasons. Smaller footprint. Less expensive. More versatile.
@@HomeGymHacksandReviews thank you for your reply, I appreciate it...I shall weigh all of this🙂
@@soniama5246 glad to help!
Thanks for the video. I have the powertec half rack, so I assume this would fit? Would it impair any other functions using the half rack?
Thank you. Yes, it will fit the 1/2 Rack, but you will need to add a connector piece at checkout. I have never used the 1/2 Rack, but it should not impact any other functions. Rather, it will add a lot of stability and versatility to the rack.
@@HomeGymHacksandReviews so is the 190lbs weigjt stack 1:1 ratio?
@@futbol1972 it is.
Thats a Great machine I have the stand alone lat tower 👍
That’s one of the only Powertec pieces I haven’t used.
@@HomeGymHacksandReviews it will probably feel identical to your lat tower only difference being it has the seat which u can swivel out to the side to perform low rows and tricep bicep movements. I also have the weight stack which I think is well worth the extra money for convenience. Keep up the great reviews 👍I love powertec stuff and am slowly building up my gym mainly with their equipment.
@@dom6205 thanks so much! Really good to hear you like Powertec too!
my current machine is horns only, can i use the weight stack plus the horns to do between 250 and 300? Or is it an either or? I need higher weight for things like seated back row.
There is a 500 pound max weight capacity and Olympic plates and the plate stack can be used in conjunction. During a few exercises in the video, you will be able to see where I use both. I mainly use the weight horns for 2 2.5s when I need a weight between plates on the stack.
thank you again for your help@@HomeGymHacksandReviews
@@MCC-tm3ny glad to help.
I like that Powertec still has a lat option for their power rack. That's getting hard to find today.
Agreed! For most people, a rack and high / low pulley will cover just about everything.
Hi do you think the range is good for my height at 6 feet ?
It all depends on what attachment you are using (ie how low it hangs from the pulley). Also, when the bench is placed in the decline position rather than the flat position, that will give you a greater ROM.
So can I add a lat pull down weigjt stack attachment to a powerteck squat rack and does weigjt stack lat pull down comes with the pegs on side? What's the weigjt of weigjt stack?
Yes, this Lat Tower can be added to the Power Rack, Half Rack, and Roller Smith. There are no band pegs, but hopefully they will be included in future editions. The entire stack is 200 pounds and you can add plates on the horns for a max weight of 500 pounds. It is a 1:1 pulley ratio.
@@HomeGymHacksandReviews ok so weigjt stack is 1:1 ratio right? On website is says 190lbs weigjt stack though. so what do you think between rp 4000 with weigjt stack lat pull down attachment or powertec half squat with powerttec weigjt stack lat pull down attacwnt?
For the Powertec the stack is 190 and the carriage is 10 pounds and 1:1 pulley ratio.
I have not used a Rep rack, but everyone who has one seems to love it.
Do you think.i can use the selectorized powertech lat pull down for belt squats? Since the seat moves out of the way it looks like you can stand rigjt under low pulley?
What’s the dimension with the lat tower attached?
The Smith is 42” deep. The lat tower adds 21” of depth. The lat tower is 40” wide (most of this is the weight horns) and 80” tall.
1:30 Wow, is it possible to have a technician come to our house and put this stuff together?
Some companies offer assembly and sometimes if you order products through a 3rd party seller they will assemble it at a pretty hefty fee. The only piece of equipment I have that challenged me is the Streamline Functional Trainer. I don’t think most machines are too difficult if you have a good socket set and wrench set.