Wheel Hub Bearing Replacement Done Right
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- Demonstration on removal and installation of a wheel bearing or wheel hub bearing in a 2007 Dodge Nitro 4x4. This process is similar on many other vehicles with slight variation. Save money by doing it yourself and avoid costly mistakes with these helpful tips and tricks. Bonus Footage at the End includes paramotor animal control at an airport runway and recovery of a couple rockets.
Lubricant featured → www.cs4000.net...
Torque wrench used → amzn.to/3mySBra (now yellow)
Impact gun featured → amzn.to/3t5tZJ9
Fuel 12V ratchet → amzn.to/3d3ENC5
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Disclaimer:
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and respiratory protective devices when working on vehicles and or with tools seen or implied in this video.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.
On behalf of myself, my wife and two kids, thanks for watching this video. I hope they've helped you tackle something you thought was a challenge and left you feeling like a power for win! And if nothing else, perhaps you had a laugh and were entertained!
You guys are outstanding! Thanks for watching to the end!
Well you put out great content so why not watch till the end. Been watching you for many years and always a pleasure. My tip for the brake calipers is it depends on what im working on. For most modern cars and trucks with struts or springs i use brake caliper s hooks. For older, or vehicles with torsion bars i use a black thin rubber bungee with metal s hooks at the ends. Slipt the bungee thru sumpthing and use each of the hooks to go thru the caliper bolt holes. Just dont forget to leave the bungee in the spring 😲
Always gotta get my BFATE fix!
i guess it's kinda randomly asking but do anyone know of a good site to watch new tv shows online ?
@Ruben Azariah I would suggest Flixzone. You can find it by googling :)
I wish I could thumbs up this video 3 or 4 more times just for the sidebar commentary. Maybe if someone like you was in the stall next to me I would still be working at my previous shops. Also Can't Antelope
Great to watch you work very entertaining and informative ,, the incepts are funny . Thanks for sharing .
I first started watching your channel when I had a Subaru and your videos helped me sort out a few issues. Subaru is gone, I don't diy on cars anymore but I still enjoy your videos. Except for the para sailing. Acrophobia. Can only watch a few seconds of you sailing across the screen before I click off. Keep up the good work.
Can't Antelope
Great video Brian! Easy and simple when you know exactly how to go about replacing the hub. Thanks again for the very thorough and detailed walk-thru.
Thanks Carl, and you're welcome!
Great video Brian!
Totally agree connectors are a symptom of overall quality
I'm glad i remembered your channel. Forgot to subscribe way back when... turns out a lot of the stuff I learned from your videos on subarus is now helping me with this truck. Cheers to you, love the vids
Thanks for your vid and tips. I was able to change out my wheel bearings in 1hr...having never done it. I like how you tell it like it is. 2006 H3 280K miles. Can send pics. You tha man!
Wonderful to watch and lots of how to's in your channel Brian. and by the way I also watched this till the end so Can't Antelope! 😊👍🏼
"Can't Antelope" Nice job Brian👌...and 'Stretchy Strap with carabiner clips' on each end to hang brake calipers👍🇦🇺
Always look forward to your videos, Brian. Hope you're doing well, buddy. Thanks for the tips.
Awesome Video. I almost died at short comedic inserts.
I just changed mine on my 06 avalanche for the second time since owning it. Had moog brand on it and they lasted right at 100k miles running 35in tires. Thought they would have lasted longer but due to tire size and I do use my 4x4 during hunting season I guess 100k is acceptable. Love the videos man! Thanks for posting
My 01 Town and Country needs rear wheel studs and I'm gonna try and replace them without pulling the hub. If I can't I hope they are not as rusted as what you just worked on.
Can’t antelope 😁 keep up the great work, thanks for sharing your knowledge!
Can't Antelope! Thanks, Brian!
Welcome & thanks J Bacon!
Gotta be airborne to chase antelope, but I can't antelope...
Your the man Brian
Can't Antelope. Love the vid, as always. from Ben, the Steamboat Knife Sharpener guy.
"Can't antelope" thanks for the really helpful video.
Same as mine now Brian, Unfortunately, parts are not easy to find here in Dubai. I keep using it so hopefully it won't give much problem later on till I find parts. Byt the way, new subscriber from Dubai.
Best of luck till parts come- welcome!
Thanks for video and guide and more power to you.
You mean no hitting the stuck brake rotor with a sledge? What kind of sorcery is this ! Bearings LOVES hammers :p That's my favorite job. Bearing AND brakes, wail with the sledge without guilt !
I wish you were close by, I would take my cars to you with no hesitation, keep up great work!
Thank You brody , good vid ! And entertaining 🤙🏾🤣
I'm glad you reused the rotors. I don't know why, but watching someone throw away a perfectly good rotor just to put on a new one, really aggravates me for some reason. lol
Most of the stock rotors are better than the cheap ones for longevity. Might as well.
Buy OEM if your going to replace parts, aftermarket auto parts have been in a serious decline as far as quality is concerned.
Thanks Brian.
10:50 !!! DO IT!!! 👍
Can't Antelope!!! Enjoyed the paramotoring bit at the end!!!
ive watched 2 videos ... 1 about 5 yrs ago n 1 today... you haven't changed a bit lol ... sly sarcsams a tad pinned in here there :)
Can't Ants Elope?
Looks like my hub jobs, minus the lift and impact tools - glad to know the expert has to beat 'em off as well!
I have used a coat hanger for years as well.
That was cool!!! The flight. :)
Glad you liked it!
I can't believe you took the time to use the impact wrench jut to spin the nut in a few threads 11:43
Nice landing
Mmmm, Can'telope...
Bravo, Brian!!
?: I can never remember when you need to have the weight of the vehicle on suspension members in order to torque them properly? Can you help??
Is it only for bushings...dang, gettin' old(er) sucks.
Cheers from the Great White North.
Hey Mario! Great question. When you have control arms with rubber filled bushings that attach to the arm and the center dowel or whatever is being pinched in by the bolt, you have to have it weighted or resting before tightening or the rubber can affect pressure on the control arm up or down and cause the vehicle to not set level.
Awesome! Thanks, Brian. That makes sense.
I hope y'all are doing well in Utah. Stay safe.
Loved the BFATE - any way to know who shot the model rockets?
Good job, i use a chassis ear and a hub buster.
So what are the rockets from? Weather instruments? I used to find similar rockets in the woods in Titusville Florida that were launched by kids at Space Camp. Keep up the good work!
I'm Impressed.
How many CFM is your air compressor and what tank size? Thanks. And Cheers 🍺
Old small one is 5.6 or so. And the new one is around 13-14
Always clean the rotor and brake pads to remove any oil grease etc you maybe got on them during r&r is a good way to ensure good working brakes...
10:49 LMFAO! We've all been there. Regarding the whole "follow-through" discussion, didn't comprehend the difference till I became a dad. I use some OTC or generic caliper hooks (s-style).
PPG was the best part. 👍😎👍
So what can't an antelope do?
Man your videos frickin hilarious hell Yeah! Keep em comin.
Can I drive my Durmax without the cv axel. I’m waiting on one to come in. I left the outer part of the cv axel in place to keep the bearing together. Was wondering if it ok to dive like this and tow my trailer for the time being.
19:13 Titan 51600 Brake Caliper Hanger Set, 2 Piece. Currently 7.96 on the amazon. Mo betta / easier than the coat hangers or bungee cords I used in the past.
Have a question … I have to do the driver side on a 2008 Chrysler town and country where would I get or how do I get the torque specs for that front end , can you Point me in the right direction, thank you 👍
10-2 romex. i swear potholes shorten the life of wheel bearings wonder if they last longer in the south?
I agree with you on the antelope, but when it comes to the yots , the thing to do with them is give them a dinner of , 22/250 lead
Thick bungie cord about 6 or 4 inches. That's how I hold mine up. Loop the hook through the caliper hole and hook her on the spring or shock.
"can't antelope". Great video.
I use the the oem tools 24518 hangers in green.
Good job.
Guy asked his fiance if she wanted Cantelope. She said we can't elope I want a big wedding and get married in a church.
Thanks!
HEY BRIAN...I HAVE A PROBLEM AND IM HOPING U COULD HELP ME WITH...ON MY 2000 BEETLE THERE'S COOLANT LEAKING FROM THE FRONT OF THE BLOCK...I THINK ITS CALLED A WATER OUTLET..O RING THERE'S A METAL PIPE COMING OUT FROM THE FRONT OF THE BLOCK RIGHT NEXT TO THE THERMOSTAT....THE PIPE UNDER THE COIL PACK...HOW DO I FIX IT.???? THANKS...VINNY
Tailpipe hangers the ones where there new in Iventory.
You can Get some stainless caliper hangers from Amazon for cheap.
Good stuff
Amigo Brian tanto tiempo me alegro verte
¡Gracias amigo Bori Lopez! Tantos problemas médicos familiares y cirugías, etc. También problemas con el automóvil familiar. Todo va bien ahora.
@@briansmobile1 Espero que las cosas de la vida mejoran para ti!
Can't Antelope. Good eye spotting those rockets!
Thanks!
Brian. Harbor Freight has a Chief air hammer that would help you on projects like this. It's not the Big Nasty but for just over $125 this would make things easier. Your getting older and better tools could help you. Ken
Thanks Ken- I've got a big Cornwell air hammer. Most people don't have one- and mine was out on loan so I just made due- good thing to demonstrate anyway.
Some good wire with rubber around it works good to hold brake caliper
Nice
Did that shop get done?
use a large reusable zip tie to hold the brakes up, that or a bungie depending on if i misplaced my large reusable zippy.
i usually use a wire wheel on a drill and do before i put the antiseeze on where the dirt and dust doesn't get into the clean antiseeze
No eye protection?
Hmmm. I swear I had safety squints engaged. I usually have glasses or squints. Not saying I'm perfect. Nice catch!
@@briansmobile1 Just looking out for you..
Rights? What rights?.....
I've been using a bungee cord for hanging calipers as of late with great success. As far as tapping that axle bolt head, yes, sometimes you want to push energy "through" the part, vs. stopping the energy "at" the part.
Can't Antelope!
I use either a zip tie or just mechanics wire to hang brake calipers
Can't Antelope. Good on ya mate!
I always use a short bunggee cord to hold caliper
13:06 my fists goin right thru the chest cavity and grabbin the spine. Understood.
Not good result this video but good video good work brother👏👏👍
1.) JQuad Stainless Steel Brake Caliper Hanger Hook - Made in The USA. 2.) A zip tie
5:30 Hit that effin thing! Lol😁
Can't Antelope. I use insulation support rods and bend them for supporting brake rotors. You can buy a box of 100 for a few bucks (not an antelope joke). Use for painting, tool hangers, etc.
Can’t antelope. Nice job!
Thanks!
Nice to reinforce that bolts need the correct torque setting, especially those that keep you going in the direction you are steering for, and those that stop you. Otherwise you will be singing "loose wheel", while waiting for your cant antelope to finish destroying itself on the road.
I did this on a 2003 saturn vue and it took hours of whacking, spraying, torching, and begging to finally get it out.
Can’t Antelope...but why? Great job!
Thanks Patrick!
Alimony is expensive additive along with unobtainium.
I’ll just save time and write Cantelope. You’re getting good with that flying machine. A poem I read as a young child, Darius green and his flying machine, check it out
I’m not sure what Antelope means. I can’t think of it this second.
Can't Atelope?
Bungee cord and if it’s to long, “that’s what she said” I slide the cord down and tie a knot in it.
If you can’t say something positive or nice keep it to yourself.
Wiring?
That's funny you use a coat hanger to hold the brake
meat hook for the caliper
While watching this, I realized I Can't Antelope
Can't Antelope. THANKS.
Thanks Terry!
Can't Antelope do it.
Can't Antelope!
Can't Antelope
But I *can* antelope. Do antelope eat cantaloupe?
Lock-tite?? No wonder I can never get those f**king things off!! :(
can't what?... oh Antelope!!!
Can't Antelope (all the way)
"Can't Antelope "
Bungee cord
OMG rogue farm implement? Poor damaged runway. Can't Antelope
"Can't antelope" in the commets
Can't Antelope ;)
Can’t antelope 😀