Hi, thanks for the video. On numerous BIOS chip reprogram and replace videos one is told to remove the chip from the motherboard, but other videos show it read and reprogrammed in situ. I just need to remove the BIOS p/w on an HP Elitebook 840 G6 - do you know if it must be removed, and if so why? Thanks again.
thanks a lot sir for the video, it's really very helpful. Just one question please, is there any risk to damage or clear the bin file from the ic by installing wrongly the clip? thanks
My dear Indian-English Speaking friend, nobody blames you for your pronunciation, but if a person is conscious that his language skill is far from fluent do you know what he does? He takes a pen and a piece of paper and write down everything that he wanted to say in this foreign language, then when he finally begins to shoot a video he reads from the script with his mind preoccupied by showing something with his hands, without posing to remember how this thing is called or what is the best adjective and how to point the direction and the degree of something.
Sorry , but did not had that much time 🕰️ to write ✍️ and make script at the day of shooting , but will keep it as a advice may in future be able to implement 🙂
Not sure if I missed something, but I didn't see it reflashed. You just backed up the hex file. What if the hex is currupted, can we just download a bios hex from the Internet and flash it to the cmos?
How to use the programmer if one has no signal to Monitor, mouse and keyboard. That is actually my problem. No display , no power to mouse, keyboard , but cpu and cabinet fan turns on. What may be wrong . Amd ryzen 3, on asus m320 mb
Hello Satishbhai -- Thanks for a very informative video using CH341A Series Burner Chip 24 EEPROM BIOS Writer -- can you reset the passwd lock after using CH341A -- and then re-flash the BIOS without removing the BIOS chip from the board. Basically, reversing it. Thanks in advance.
Hey got a Maxsun B650. Not sure which file to write with, in the BIOS folder I have 5 files: 3 EFI files (AfuEfix64, BootIa32, BOOTX64) - each 600KB file size 032 file - 32,000KB file size NSH File - 1KB Any ideas?
Greetings, the BIOS flasher w/ Test clip to flash BIOS and EEPROM chips is an interesting resolve I being clueless such a fix existed. Considering I've been spending endless hours attempting to normalize my corrupt BIOS that invaded my gravity standing sideways. I have a dysfunctional Lenovo YOGA 730-15IKB Laptop, question; Are the flasher Test clip Devices universal for all computers or device specific for specific model computers? Thank you very much for posting a vital answer for this educational post for all of us, remain well in peaceful balance to take good care of it all...
bro, awesome tutorial. I have surface pro 3 which is locked at boot level. cannot even go to boot setup as well. right after boot screen it asks for password. is there a way i can flash the bios without opening the surface pro?
@@Aditya11ttt he just observed that you used the wrong voltage, this programmer is for 3.3v and 5v chips, and has to be used with an adapter for 1.8v chips. You could have damaged this chip by not using an adapter.
Can this programmer work to read and write an AMTEL 24C128N chip? And can you also reply with links to drivers and software sites? (please and thank you!)
@@Aditya11ttt The programmer came today and it took me all of 10 minutes to read the chip, backup the existing data to a file, edit the VIN, and burn in the new data. (I used the no suffix version of the chip in the software..."24C128".)
I can see that You have the Black version of the board where most of the time it sends 5V to power line instead of the 3,3V that most of the chip required. There should be apply the 3,3V Fix If I am not mistaken.
@@Aditya11ttt With all due respect and Your knowledge ... there are some versions that give correct 3.3V output but some give 5V output. According to manual the jumper is used to switch between programming mode and TTL mode on the device. The easiest way is to test the pins with multimeter. My purpose of the comment was not to argue ... just advice to people who got version with 5V output as they are on the market.
@@Aditya11ttt I am still expecting delivery of mine but to be on the safe site I will check the output before I will use it. Thank You for the videos and share of Your knowledge.
Sure u should check !! Always to be on safer side ! If it’s Ch341a original 99.999999999% it will have 3.3v by deafult ! Because we sale 100+ pcs in a year no issues !!
My hp laptop hp 15-bs590tu board is csl50/csl52 e791p rev 2.0. I manually update bios f.75 rev a and after that laptop not starting. Black screen only. Cpu fan in running, motherboard light gets on when switching on but nothing after that. I think bios got corrupted. Tried to reset cmos battery, tried win +b key combination. But nothing working
@@Aditya11ttt I think it is because I used the bios from HP but did not transfer all the required information from the old bios bin file over to the new bios bin file. Do you have a video with instructions on how to do this?
Sometimes on board it’s not working due to volt and. Amp u can add power to MBD and try to read may be it can !! Be careful while u add power a small mistake can short MBD !
Bro can I reflash my board's existing 25 series SPI DIP 8PIN bios chip as I'm not able to find one to buy that chip online. Can we erase and write on the existing bios chip on my motherboard (it is dead, just the processor fans running , no signals). Reply would be very great full
@@Aditya11ttt thank you for the answer. I have a jumper at pins number 1 and 2 and i think this is for the spi function. Should i use an other combination to set 3.3V?
I know that I am 2 years late, but as I was searching for this I found that it's not causing something because volt can't damage only the current and the current is low soo no problem. And at time the programmer communicates with the chip then it will set it automatically into 3,3v, soo no problem exists.
Can’t explain everything In one video ! Can’t satisfy everyone! Human wants are unlimited with no end 🙂 PS: This video was made only on how to flash bios not how to make bin file there is another video on that video on this channel !
@@Aditya11ttt You're right there. It's just that in your video the winbond chip was described as 1.8v by the programmer(8:50) so I was surprised. Now, I just checked the spec sheet on that chip and it is 3v. Thanks for this guide. I'm new to ch341a though I've had other experience jtagging and with arduino uno.
Hie my friend please can you help me i have 2 chips from my printer that's 24LC128 and 93C86WP firstly will this programmer work with these chips also can the bin file be modified the chips are from my printer i want to change the serial number of the printer on the bin file
I have Dell latitude 5400 Chromebook Enterprise. I found a chip named winbond 25Q256JVEM. 2128 6114 4Z400. Can you let me is there a type of programmer available or any universal one will work. Any help much appreciated.
thanks, men this helps me a lot, oh and by the way, English title English explanation thumbs up for you
First time i understand something about this matter; *Thanks*
Thank you for this - I was able to make mine work.
Legend
SUBBED AND LIKED
Brother thanks a lot your video helped me bring back my old asus mobo... ❤
Beautifully presented...fantastic!!
Hi, thanks for the video. On numerous BIOS chip reprogram and replace videos one is told to remove the chip from the motherboard, but other videos show it read and reprogrammed in situ. I just need to remove the BIOS p/w on an HP Elitebook 840 G6 - do you know if it must be removed, and if so why? Thanks again.
this saved me..really helped alot... JAI SHRI RAM
🙏
Thanks a lot, it is my first flashing
thanks a lot sir for the video, it's really very helpful. Just one question please, is there any risk to damage or clear the bin file from the ic by installing wrongly the clip? thanks
Only laptop can brick ! That’s all the most possible issue ! Other wise no issue
You and u r video very good i like i m u r fane plz make u my teacher
Best video. Subcribed. Thanks Sir. After We back up the BIOS program so we should re-write to bios to the bios chip again to make it work?
Yes
@@Aditya11ttt One more qestion Sir. We use old Bios or the new one BIOS File from Motherboard Website? Thanks
Yes
@@junkies4463 if the bios does not work, just flash a brand new bios for your motherboard or laptop.
@@retroke6560 THanks my friend. ALready write a new bios and motherboard still no display. I think the problem is on the hardware
CH431 or CH341 ? While making the video you said CH431, 4 to five times or may be more😊
HI. What is better to use : ASProgrammer or Neoprogrammer ? Thanks
As programmer
How do I flash a new bios to the chip? What format should the bios be in?
the format is .BIN
My dear Indian-English Speaking friend, nobody blames you for your pronunciation, but if a person is conscious that his language skill is far from fluent do you know what he does? He takes a pen and a piece of paper and write down everything that he wanted to say in this foreign language, then when he finally begins to shoot a video he reads from the script with his mind preoccupied by showing something with his hands, without posing to remember how this thing is called or what is the best adjective and how to point the direction and the degree of something.
Sorry , but did not had that much time 🕰️ to write ✍️ and make script at the day of shooting , but will keep it as a advice may in future be able to implement 🙂
what mean 25xx and 24xx series ? do you have manuel for this ? thank you
Spi 25xx and I2c 24xx
what is the title of the music at the beginning of your video @0:33
thank you for the tutorial !! great video !!
Let me check
excellent
Hello, I have an HP Elitebook Folio 9470M (made in 2016) that has a locked BIOS and wondering if this will work with clearing the BIOS password?
Please suggest me eeprom 93c46 programmer which included chimti its used to memory chip on yamha fz meter reading
This ic not tested refer data sheet
@@Aditya11ttt what about 24c08 ic can program on this programmer ?
@@fitwithsurya yes
@@Aditya11ttt thanks
Thanks again for sharring !!
Do I see this right you read a 1.8V IC without the 1.8V Adapter?
I just saw that too lmao
For Hitachi flora se210 u have software and hardware tool?
I dont want to program but what to see the firmware content stored in flash chip. Can I follow the steps mentioned in the video?.
Try
Not sure if I missed something, but I didn't see it reflashed. You just backed up the hex file. What if the hex is currupted, can we just download a bios hex from the Internet and flash it to the cmos?
Yes find the good one and flash that’s all
did you remove cmos battery sir?
Not needed
Great guide. Thank you.
Is that clip really usefull as i have seen in other video that says that this clip is useless
It’s all about how u use !
22 laptop or desktop ki hdd bios ko jeh program kr dega k nhi
How to use the programmer if one has no signal to Monitor, mouse and keyboard.
That is actually my problem. No display , no power to mouse, keyboard , but cpu and cabinet fan turns on. What may be wrong . Amd ryzen 3, on asus m320 mb
Please do reply
Hello Satishbhai -- Thanks for a very informative video using CH341A Series Burner Chip 24 EEPROM BIOS Writer -- can you reset the passwd lock after using CH341A -- and then re-flash the BIOS without removing the BIOS chip from the board. Basically, reversing it. Thanks in advance.
Try
Not if you just copy and reflash the same bios but download a clean bios file from manufacturer or edit the bios file which is not easy
I have a problem my Dell Inspiron 15 Gaming 7567 is showing ACPI error in Windows booting, can it be solved by bios chip flashing or replacing ?
From where did you download the software of this programmer ? Please clarify.
Link in the description
Hey got a Maxsun B650. Not sure which file to write with, in the BIOS folder I have 5 files:
3 EFI files (AfuEfix64, BootIa32, BOOTX64) - each 600KB file size
032 file - 32,000KB file size
NSH File - 1KB
Any ideas?
Greetings, the BIOS flasher w/ Test clip to flash BIOS and EEPROM chips is an interesting resolve I being clueless such a fix existed. Considering I've been spending endless hours attempting to normalize my corrupt BIOS that invaded my gravity standing sideways.
I have a dysfunctional Lenovo YOGA 730-15IKB Laptop, question; Are the flasher Test clip Devices universal for all computers or device specific for specific model computers?
Thank you very much for posting a vital answer for this educational post for all of us, remain well in peaceful balance to take good care of it all...
bro, awesome tutorial. I have surface pro 3 which is locked at boot level. cannot even go to boot setup as well. right after boot screen it asks for password. is there a way i can flash the bios without opening the surface pro?
Yes via bios flash can
Esse gravador tem voltagens de 4.8 e 3.2 volts. E o programa identificou que a Winbond da placa é de 1.8v. Não corre o risco de queimar a eprom ?
English please !
@@Aditya11ttt he just observed that you used the wrong voltage, this programmer is for 3.3v and 5v chips, and has to be used with an adapter for 1.8v chips.
You could have damaged this chip by not using an adapter.
what is the best programmer in the market ?
Budget and purpose ?
wa.me/message/PZX6XIG5OBFFG1
Contact for details
@@Aditya11ttt most easy and efficient to use.
@@aktech3271 contact via what’s app link above ! For clear details and better suggestion !
Can this programmer work to read and write an AMTEL 24C128N chip? And can you also reply with links to drivers and software sites? (please and thank you!)
Na
@@Aditya11ttt The programmer came today and it took me all of 10 minutes to read the chip, backup the existing data to a file, edit the VIN, and burn in the new data. (I used the no suffix version of the chip in the software..."24C128".)
It’s i2c Ic
I can see that You have the Black version of the board where most of the time it sends 5V to power line instead of the 3,3V that most of the chip required. There should be apply the 3,3V Fix If I am not mistaken.
Nothing needed use Ch341a it’s most common ! There is jumper which when u shift gives 5v and by default it comes with 3.3v set !!
@@Aditya11ttt With all due respect and Your knowledge ... there are some versions that give correct 3.3V output but some give 5V output. According to manual the jumper is used to switch between programming mode and TTL mode on the device. The easiest way is to test the pins with multimeter. My purpose of the comment was not to argue ... just advice to people who got version with 5V output as they are on the market.
It was in the past , but now mostly it’s 3.3v
@@Aditya11ttt I am still expecting delivery of mine but to be on the safe site I will check the output before I will use it. Thank You for the videos and share of Your knowledge.
Sure u should check !! Always to be on safer side ! If it’s Ch341a original 99.999999999% it will have 3.3v by deafult ! Because we sale 100+ pcs in a year no issues !!
Where to buy this in india?
What’s app +91-9584145145
Very good video thank you sir
Nice the informative video Sir, Can I get the BIOS program for Lenovo Ideapad 330S? Thanks in advance.
Contact via what’s app +91-9584145145 for details
My hp laptop hp 15-bs590tu board is csl50/csl52 e791p rev 2.0.
I manually update bios f.75 rev a and after that laptop not starting. Black screen only.
Cpu fan in running, motherboard light gets on when switching on but nothing after that. I think bios got corrupted. Tried to reset cmos battery, tried win +b key combination. But nothing working
Try flash method
Thank you for this useful video
Wait, so the driver is for win7nonly?
Win 10 also work
Please start your telegram group for learning all for us
Great video! I tried flashing mine, but it's still failing post. Is it possible the chip itself is bad even if I can write to it?
No
@@Aditya11ttt I think it is because I used the bios from HP but did not transfer all the required information from the old bios bin file over to the new bios bin file. Do you have a video with instructions on how to do this?
@@Borderlinepoeticdisorder use Hp dim tool !
Hp dmi search in channel
hi there im trying to read bios from x1 carbon 7th gen ...do i need to remve clip completly or can i use the crocodile conector to red it ?as not sure
Sometimes on board it’s not working due to volt and. Amp u can add power to MBD and try to read may be it can !! Be careful while u add power a small mistake can short MBD !
Nice video, well explained, +Thumb up +New Sub
Hi i have a question for you can you help me to install ch341A please let me know thanks
Software Link in the description
Bro can I reflash my board's existing 25 series SPI DIP 8PIN bios chip as I'm not able to find one to buy that chip online. Can we erase and write on the existing bios chip on my motherboard (it is dead, just the processor fans running , no signals). Reply would be very great full
Try
@@Aditya11ttt yes I'm gonna try,
can i program this chip MX25L3206EM2I-12G with this device ?
Yes
How did you put the clamp on the chip I tryed many times until I ruined it
Is it can flash 1.8v bios?
u need adapter
@@marcuscoolin okay tks
Can you tell me how to get a unlock bios file because my laptop’s bios is locked so i need to reprogram the ic of my hp elitbook 830 g5
@@loveed765 what’s app +91-9584145145
i have graphics card rx5700xt i just bricked bios can this equipment fix it?? and if so how? thanks Rukhsana
Try with new bios file
@@Aditya11ttt i tried everything. install in pc as 2nd card. you cannot even read the file it is corrupt.
@@GhostvaperYT !!
Than buy new card !! Or search another parallel and try the bios ! And ur luck !
@@Aditya11ttt im gonna fix this card it is £600 card rx5700xt
Hello friend..Can I install the software on Windows 11 home??Thks in advanced....
Try ur luck !
can this programmer use and for programming eprom of tvs like W25Q16, W25Q32, W25Q64, W25Q128 without remove them from mainboards ?
Try
Can i program 3.3 V Bios Chip Using this device....???
Yes
Is this works on a desktop motherboard?
Sir is it possible for dvr bios programing
Depends on the type of ic
Sir it is support 93 series ic ?
No
Hello sir, is it applicable also in programming the memory ic for led, lcd tv? How much is the cost of the complete set?
Contact +91-9584145145 what’s app
thank you for the video. Did you make any modification to the programmer? my bios use 3.3V and the programmer provide 5V.
There is jumper to set 3v and 5v
@@Aditya11ttt thank you for the answer.
I have a jumper at pins number 1 and 2 and i think this is for the spi function. Should i use an other combination to set 3.3V?
I know that I am 2 years late, but as I was searching for this I found that it's not causing something because volt can't damage only the current and the current is low soo no problem. And at time the programmer communicates with the chip then it will set it automatically into 3,3v, soo no problem exists.
Can it programmed ac inverter eeprom?
If supports u can !
driver was already installed bhai, but the problem when i click to read id it said error connecting USBAsp(3) hope you help me bhai. thanks
Check driver in device manager install or not !
@@Aditya11ttt its ok now. i try other programming software.
Sir bios coperier & repair video ka price dana ji
What’s app +91-9584145145
Can i use these device to flash or reset the bios of AMD rx580 graphics card?? Please reply
yes, you can use it to flash any hardware bios. MB, HDD, Graphics card, etc
2 questions about programmer:will this programmer work on both AMD and Intel motherboards and can it reprogram a dead pc motherboard bios chip??👀
Programmer has nothing to do with intel or Amd
@@Aditya11ttt ok thanks
Hey can I use xgpro programmer with CH341A?
No
@@Aditya11ttt alright thanks
Does the software work in Windows 10?
Yes
Ok, bios files are .CAP format. Why didnt you explain to the audience how to convert the .CAP file into .bin which the programmer uses?
Can’t explain everything In one video !
Can’t satisfy everyone!
Human wants are unlimited with no end 🙂
PS: This video was made only on how to flash bios not how to make bin file there is another video on that video on this channel !
Which EEPROM type do I use on that
In what ?
@@Aditya11ttt can it work while using vag EEPROM programer
does it work with gigabyte B450 aorus elite motherboard ???
Yes any spi bios
Sir mere pas rt809f bios programer he to kay me ye conecter lake isme use kar sakta hu.??
Yes u can use this clip in any programmer it’s a universal clip !
@@Aditya11ttt Thank-you Sir
You can make games with this right
?
Thanks man!
Can this be used on hasp hl?
Hi there, what is the different between 24x and 25x on CH341A ?
Bro can we change digital meter reading of bikes and scooter
Yes I think so
@@Aditya11ttt bro make a video on increasing odo meter in digital meter by using this device.
Please bro make a video
I am not connected to that work ! But I think so it’s possible ! U can search more u will get many videos ! I think so !
@@Aditya11ttt ok bro 👍
does this write all chips?
“All” not possible for any programmer in the world , there is something always new coming !
@@Aditya11ttt right.. bit at least many popular one ..im just ordering
99% spi | i2c bios u can
thanks SIR
On which Issue of the laptop one has to use this programer can u plz explain. Thx.
When ur bios is corrupted , or in case of any kind of bios issue !
can i replace bios ship with any other one
Same size yes
@@Aditya11ttt and can use the old software from the old one can modify some information like name of the manufacturer
If u know location and suffix where and what to change u can ! Doing research you can find out !
@@Aditya11ttt thank you so much
Hi can i read spansion fl116kaf01 with this programmer?
No
@@Aditya11ttt thank's, what programmer can i use?
Ic pdf
Won't 3.3v supply kill the 1.8v bios chip?
Use 1.8v Adoptor who is tell u to use directly
@@Aditya11ttt You're right there. It's just that in your video the winbond chip was described as 1.8v by the programmer(8:50) so I was surprised. Now, I just checked the spec sheet on that chip and it is 3v. Thanks for this guide. I'm new to ch341a though I've had other experience jtagging and with arduino uno.
Can you tell me how to repair lenovo z570 with faulty BIOS. I have got bios drivers from official website.
Upto 3500/-
How much for your all your videos in English!! Bios and laptop repair training?
wa.me/919584145145
Hi where I can find the program download please send me updated
Can it program Samsung TV I/C
Spi yes
Nand or emmc no
Hie my friend please can you help me i have 2 chips from my printer that's 24LC128 and 93C86WP firstly will this programmer work with these chips also can the bin file be modified the chips are from my printer i want to change the serial number of the printer on the bin file
24xx yes other one no
I have Dell latitude 5400 Chromebook Enterprise. I found a chip named winbond 25Q256JVEM. 2128 6114 4Z400. Can you let me is there a type of programmer available or any universal one will work. Any help much appreciated.
I have hp elitebook 8570p bios password locked can i use this programmer to unlock it
Ya u can read bios from this
Thank you
Where is the buy link for this clipper and Programmer
wa.me/message/PZX6XIG5OBFFG1
how to download the programs you are using in this video ?????please
Link is there in the video description
I cannot get the programmer to detect my chip. Using software with windows 11. Error in read says error connecting USBAsp(3)
How ro find bios chip in msi b450 pro vdh max motherboard please reply
Searching is the one of the best way
I got Winbond W25Q128JWSQ bios chip and this chip ic is not available in the software pls help 😢 what can i do to flash my bios
How to program | Flash 1.8v bios chip using CH341A
th-cam.com/video/-bE2mpoB5mQ/w-d-xo.html
Will work u need additional adoptor for 1.8v