3 Ingenious Ways To Fix Broken Plastics With Plastic Welding Method!
ฝัง
- เผยแพร่เมื่อ 25 มิ.ย. 2023
- Hello everyone! You are watching video "3 Ingenious Ways To Fix Broken Plastics With Plastic Welding Method!"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diyprojects #plastic #tips #welding #plasticwelding - แนวปฏิบัติและการใช้ชีวิต
Not a bad idea at all. This way we can do wonderful things. Truly exceptional service indeed. ❤❤❤
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
İyi fikir kolay gelsin
Her Pilastik le her pilastge kaynak olurmu tutarmı yoksa kendi cinsinden mi olmalı tşk
Génial ! Simple, rapide et peu couteux . Un grand merci🤩
Hello! thanks for your comment. Wish you all the best!
Embedding the staples was a cool idea. Using a nonessential piece of the parent material is key to success. A heat gun can work if you find rge correct mix of heating your additive material and the repair
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Super jest to pomysł pozdrawiam twórcę tego filmiku 👍👍👍👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Super sprawa dzięki bardzo za pomysły.
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Recommend instead of reinforcing the plastic weld seam with nails, instead to embed used staples. They are smaller and fit within the plastic more easily but also the bent loop on both ends of the used staple holds well inside the plastic.
Hello! thanks for your recommendation. Wish you all the best!
@@creationholic101lmn
the ideas are great. Thank you for making them
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Belle présentation des possibilités de réparations ! 😊
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Excelente la reparación Saludos desde Guadalajara Jalisco México
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
Boas dicas nesse vídeo. Por isso já me inscrevi no canal. Obrigado.
Hello! thanks for your comment. Wish you all the best!
Nice work buddy, especially the trick with copper pipe. Keep up the good work.
Hello! welcome to my channel. I am very happy to read your comment. Wish you have a nice day!
Os veo desde Gijón, Asturias, España.
Me encanta el bricolaje y siempre estoy encantada de aprender cosas nuevas. Gracias por aportar estás ideas, me parecen estupendas.
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Étant soudeur par métier et toujours par passion, j'ai été scotché par votre vidéo (vue en totalité sans pouvoir ciller...ça pique un peu 🙄).
Je suis devenu très client de vidéo/tuto bricolages mais il me semblait en avoir fait le tour, surtout dans ma spécialité ébé j'ai encore appris qq trucs qui me seront bien utiles...et ça c'est top ! 👍👍👍😉
Bien que connaissent la soudure plastique, les idées d'utiliser des Rislan ou une découpe directe sur la pièce comme apport ainsi que la fabrication de la buse en cuivre sont réellement ingénieuses.
Alors merci pour cette technique, ça paraît si évident après coup que ça en devient une preuve de sa qualité!
Je devrais la mettre en pratique dès demain.
Vous avez 1 Abo supplémentaire (et pas des moindre 😀), je suis curieux d'en voir plus !
Hello! Welcome to my channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!
Vous pensez que cela sera valables pour tous les plastiques, perso je doute
Muito obrigado. Grande dica!
😍😍😍😘😘😘💕💕💕
SEI BRAVISSIMO!!! MI HAI APERTO UN MONDO... GRAZIEEEE 💖 DALL' ITALIA
Desde Colombia, gracias por esas geniales técnicas.😊
Hello. Welcome to my channel. Hope you have a good time while watching the video!
stosuje od lat tą 3 metode-pozdrawiam
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Kanka videolarını yeni keşfettim. Gerçekten harika tüyoların var. Başarılarının devamını diliyorum.
🇹🇷
Hello. Welcome to my channel. Hope you have a good time while watching the video!
@@creationholic101 Teşekkür ederim
Soy de Colombia y me gusta lo que enseñas para poder aprender técnicas nuevas y le doy gracias
Welcome to Creation Holic channel! Thank you so much for your support
De Colombia. Ignacio me gusta muy práctico y fácil de aplicar.😊
Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!
Very good ideas 😊
Hello. Thanks for your positive feedback. Wish you all the best
There are a number of different plastics all with different properties. It would be nice if you can identify the plastic you are working with, as not all plastics are this easy to weld.
Could you identify your plastics?
@@gilldanier4129ABS, PP, PE… in this video it’s abs
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Con este video perfecionare lo que yo hacia, especialmente con los broches clips, excelente muchas gracias.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
I enjoyed this video. It will help me tremendously with an upcoming project !
Glad it was helpful!
be sure to do this work outside with fan blowing fumes away. i personally knew a well recognized artist that worked using a torch to heat plastic buckets into sculptures. he developed a very rare lung cancer that killed him and was attributed to inhaled plastic fumes.
Thanks for your reminder
Its a mesotelioma. A rare case of lung cancer !
44444444@@creationholic1014
You must use the SAME KIND OF PLASTIC, or it will NOT hold. eg: bumper covers... Polypropylene and a wire screen with heat to fix cracks etc. .. you cannot use zip ties, they're the wrong kind of plastic
Stimmt. Um herauszufinden ob beide zueinander passen, mache den " Schnüffel -Test". Zünde deinen Kabelbinder an, ausblasen und riechen. Das gleiche mit dem was du schweißen willst. ( Ein kleiner Streifen mit einem Cutter reicht.) Riechen beide gleich, funktioniert es.😉
Dämmwolle sollte auch funktionieren. Es ist ja Glasfaser verstärkter Kunststoff. Das poliert immer schön die Schnecke und die Rückstrom -Sperre. Beides muss man an der Maschine öfters austauschen. Es schleift sich ein.😉
Hello! thanks for your comment. Wish you all the best!
Hola amigo..buen video...yo uso es el tercer sistema q coloco pedacitos de alambre y queda una soldadura muy buena...éxitos.!
Hello! thanks for your comment. Wish you all the best!
Muito bom, Parabéns!
Desde São Sebastião do Caí RS Brasil.
Welcome to my channel! Hope you have a good time while watching the video!
Except for the dangerous fumes and the fact that most plastics will lose their initial properties and become brittle. Just look for a compatibilidade glue or epoxy glue you can add a metal or fibre glass mesh behind and it will actually fix the broken plastic
hello and thank you very much for your recommendation! Wish you the best!
he can work over the fan to reduce the fumes. Also he can also use steel wool to add strength to the bond rather then staples.
This works well. If you heat it just enough to melt but not enough to smoke the plastic will remain flexible and strong.
Ótimas dicas e excelente vídeo. Por favor, como é feita a limpeza das pontas dos ferros após a utilização, especialmente a que é feita de um tubo (na primeira parte do vídeo)? Imagino que deva ficar resíduo do material aplicado no interior do tubo aplicador. Somos da cidade Recife, localizada no Brasil 🇧🇷.
想知道+1
Hello! Welcome to Creation Holic channel! About cleaning the tip of soldering iron, I have film 1 video about it. Kindly check it out on my channel. Wishing you health and happiness always!
❤❤❤
Im from Fiji. Thanks for your brilliant ideas. Just what I needed
Hello! thanks for your comment. Wish you all the best!
Sand smooth with high grit (1000 TO 3000) paper and then apply Armor All or similar to bring back to almost orignal finish?!
Like the idea. Thanks for sharing.
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
fine ideas, though I urge you to do such plastic-melting OUTSIDE, as many potential toxins (to lungs and nervous system) are released when burnt.
4 L9s
Hello! thanks for your comment. Wish you all the best!
DF
Από την Ελλάδα
Muy buenos tus conocimientos ,soy de Brasil .
Poland 🇵🇱
Hello. Welcome to my channel. Hope you have a good time while watching the video!
ประเทศไทย ได้ความรู้ดีครับ ขอบคุณ
@@creationholic101😢😢😮😢Aw😢😮😮
من ایرانی هستم استان بوشهر(جنوب غربی)
Indonesia 🇮🇩
思いもつかない斬新なアイディアで素晴らしいです。私もバイクの部品修理に使います。ありがとうございました。
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
ありがとうございました。すごく参考になりました。はんだゴテの利用と、先の部分の取り換えは目からうろこでした。素晴らしい。
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
Viessmann
ViessmannCaldaie
bro this is genius and something i have needed in the past and used pvc pipe glue instead but this is way better method!
Me gusta mucho la habilidad con que haces las cosas, Mexicano que vive en El Paso TX USA
Hello! welcome to my channel. I am very happy to read your comment. Wish you have a nice day!
Parabéns Kim, deixa esse insignificante continuar assim. Já que ele quer é palco, mande ele de volta p BBB que é lugar de gente da laia dele!
Hello! thanks for your comment. Wish you all the best!
Hola, vivo en Querétaro, México. Gracias por el video. Se rompió la base de plástico del ventilador y lo voy a reparar, saludos.
I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share
Soy colombiano y me gusta todo lo lo que tú enseñas espero que sigas mandando metes videos
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
รับชมจากระยองครับ เป็นการแบ่งปันความรู้ที่ดีมากครับ
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Cool ideas and nice music ::: Thanks a lot for video and inspiration 👍🙂
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Nice tube tool! Istead of nails and clams I use fiberglass tissue which is strong while being extremely thin.
Hello! thanks for your recommendation. Wish you all the best!
Excelente video. Lo pondré en práctica si así Dios me lo permite. Saludos desde Pacora caldas Colombia. Bendiciones
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
Eline emeğine sağlık çok güzel pratik fikirler sunuyorsunuz. Teşekkürler..
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Great ideas
Glad you think so!
Géniale votre idée. Bravo cher monsieur et bon courage.
Welcome to my channel! Hope you have a good time while watching the video!
Bjr de Paris, je cherchai une idée de réparation de plastic depuis longtemps. Je vais essayer en protégeant mes bronches. Bravo pour cette démonstration.
Thank you for sharing your feedback and expressing your perspective
Magyarország, Nyírpazony.
Innen néztem a videód!
További jó munkát!
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Muchas gracias por compartir tu ideas. El adhesivo plateado que colocas ¿que material es? ¿como se llama?. Bendiciones.
I am using aluminum tape
Your idea is awesome. very useful. I will do it your way
Hello. Thanks for your positive feedback. Wish you all the best
Egy nagyon jó módszer az, hogy veszek egy újat.😊🕊
Sangat bagus ide nya bisa di terapkan untuk perbaikan atau perawatan plastik retak atau pecah sepeda motor matur nuwun terima kasih dari indonesia
Hello. Welcome to my channel. Thank you for your feedback!
Merci, from Paris (France). this kind of repairs has always been a problem for me. The glues never held. Now I know.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Superbe réalisation bravo 👌
Hello. Welcome to my channel. Thank you for your feedback!
Çok güzel ve başarılı sonuç mükemmel tebrikler.🇹🇷
I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share
Simply; you are a real GENIUS👌✌
Hello! welcome to Creation Holic channel. I am very happy to read your comment. Wish you have a nice day!
Hola soy de Perú felicitaciones muy buenos tus consejos prácticos
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Jsem z CZ HLUČÍNA a nápady jsou výborné 👍
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Terimakasih sudah berbagi pengetahuan kawan
Hello! Welcome to my channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!
Excelente, me dado ideas muy efectivas gracias
8:42
Hello! Welcome to my channel! I am glad you like my ideas. Wishing you all good things!
Desde Almería ( España ).
Muy bueno el vídeo. Enhora buena
Hello! welcome to my channel. I am very happy to read your comment. Wish you have a nice day!
Muy buenas ideas, gracias
Desde Villahermosa, Tabasco, México.
Hello. Thanks for your positive feedback. Wish you all the best
Sehr schön gemacht, sehr schön dargestellt, Danke !!
Welcome to my channel! Hope you have a good time while watching the video!
muy buena idea abrazo argentina un conocimiento mas
My friend you are amazing well done. You also give us ideas for the adhesives. I am from Greece, a car mechanic but I also make plastics.
Thank you very much!
Uz malo alata kao i znanja , uvek ima neka sitnica od plastike koja će "profunkcionisati" uz mali napor !!! Hvala za video
Hello! Welcome to Creation Holic channel! I am glad you like this idea. Wishing you health and happiness always!
Outstanding repair
Très beaux travail merci et bravo. 🇫🇷
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Sóc en Francesc. El meu país és Catalunya dintre d'Espanya.
Mi nombre es Francesc. Mi país es Catalunya (nací en Barcelona).
Me parecen muy interesantes tus propuestas de reparación. He probado de reparar unas carcasas de un Alfa Romeo y han quedado perfectas con las bridas y los refuerzos de malla de inox. Gràcies
Hello! Welcome to Creation Holic channel! I am glad you like this idea. Wishing you health and happiness always!
Bravo ! Je salue vos aptitudes exceptionnelles en la matière et vous en remercie sincèrement.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Iz Hrvatske (Croatia),zbog susjeda gledam,pa da mu prenesem ovo što sam vidio.07,07 sati,po našem vremenu .
Hello! welcome to Creation Holic channel. I am very happy to read your comment. Wish you have a nice day!
@@creationholic101 Nema na čemu,svaka dobra stvar, video koji je jednostavno objašnjen vrijedi pohvaliti.Još jednom, pozdrav iz lijepe naše Hrvatske.I još jedna napomena, povremeno gledam određene video.A što se tiče vašeg rada,samo nastavite tako.🌍💙🌞🤠.
Super ,merci de nous donner envie de réparer au lieu de devoir jeter
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Απλη ρευστη κολα.με.μαγιρικη σοδα. Τελειο αποτελεσμα σε πεντε λεπτα!!😊😊😊😊😊😊
Hello! thanks for your recommendation. Wish you all the best!
Very Good. But Choose the correct shape conical grinding stone wheel which makes a proper groove along the broken edge line in the plastic part.
Hello! thanks for your comment. Wish you all the best!
Thank you from Italy Teacher 👍👍
Hello! Welcome to my channel! I am glad you like these ideas. Wishing you all good things!
Merci pour ces idées qui vont nous faciliter la vie. Je viens de Linxe 40260 dans Les Landes (France)
Hello. Welcome to my channel. Thank you for your feedback! Wish you have a nice day
Super a velmi užitečné
Buena idea, recomendación usar toda la hoja de sierra. Se rompe fácilmente porque se traba en próximos usos
Hello! thanks for your comment. Wish you all the best!
عمل ممتاز وافكار رائعة جدا اخوك من الجزائر
Hello! welcome to Creation Holic channel. I am very happy to read your comment. Wish you have a nice day!
Muy bueno, creo que la tercera es la mejor, lo que no entiendo es por que no usar la primera punta que le haces al soldador para usar en el tercer truco, y por que usas la cinta de aluminio detrás del plástico antes de reparar, eso me ha llamado la atención, saludos y gracias por compartir.
Supongo q para dar firmesa en el proceso y pareciera ser cinta de aluminio la cual ayuda más, pero mi pensamiento es una paja mental mía y puedes ignorar me jaja.
La cinta la usa como Soporte de ambas Partes Rotas para que no se muevan y debe ser de aluminio para que no se Funda con el Plástico en el proceso de la Reparación ...el Aluminio aguanta muy bien la temperatura ...
hello and thank you very much for your comment! What you said is very true! If you have any other ideas or solutions please share with me! Wish you the best!
@pablobucello8233
Welcome to Creation Holic channel! Hope you have a good time while watching the video!
Bravissimo complimenti per la tua invenzione!!
😮
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
😯 Whaouh ! excellentes idées, à expérimenter (je n"ai pas encore de fer à souder)
Hello! welcome to my channel. I am very happy to read your comment. Wish you have a nice day!
THANK YOU. 👍🥇
AND HUGE THANK YOU FOR INTRODUCING ME TO THE ARTIST, ( UNICORN HEADS).. 🙏😱 ATRIP AROUND THE MOON 🎶 .. JUST WOW..
Glad you like it! 😘
Excelente te felicito hermano. Soy de san Felipe estado Yaracuy. Venezuela 👍🇻🇪
Hello! Welcome to my channel! I am glad you like this idea. Wishing you health and happiness always!
Useful ideias, congratulations. I,m in Piedade SP Brasil
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Que top muito legal !!!!
Welcome to Creation Holic channel! Thank you so much for your support
Je vous écris de strasbourg ....chapeau pour votre vidéo...cette technique va m'être utile pour réparer un pare boue....merci
Glad it helped!
เยี่ยมมากเลยครับได้ความรู้ดีมาก
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Oh wow yes like some one was commenting, the soldering iron is definitely over temperature for doing plastic welds and is making a lot of nasty burned-plastic pollution. Hard to clean up and reuse the same parts afterwards. Can we consider to use a hot-glue gun? Or to run the soldering iron at half voltage so it is not so hot?
Hello! thanks for your comment. Wish you all the best!
Excelente Solución ..👍🏽👍🏽
Hello. Thanks for your positive feedback. Wish you all the best
Bjr, Merci pour votre vidéo et les bonnes idées de réparation. Bon courage, un fan d'Algérie.
Hello. Welcome to my channel. Hope you have a good time while watching the video!
Thanks a lot from Spain
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Hello! Super video, thank You from hungary.
beaucoup d'idées , bravo!
Welcome to my channel! Hope you have a good time while watching the video!
Desde Ecuador. Que bien. Gracias por tus idea
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Très ingénieux l'idée du fer à souder
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
¡Ah! ...si me sirviera para reparar los respaldos de sillas de jardín "rotos"
Sería fantástico.
Por ahora usé material de dos principios pero se volvieron a separar.
Gracias y saludos cordiales, de Simón
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Gracias por compartir. Saludos desde Mexicali, Mexico
Hello. Welcome to my channel. Thank you for your feedback!