I’m in the process of building my cab now and I’m installing tables into pinup popper, I used the baller installer and of course it runs vpx 10.6. After downloading and installing this T2 version it said it needs 10.7. Just curious, are you running the 10.7 update exclusively or as a separate emulator in pinup popper like how major Frenchy’s video describes?
@@AllPinballFanatic Thanks for the reply. I was trying to figure out if I wanted to make the full change or just add it in, Most likely looking into that this evening. Thanks for sharing!
Joe Lemire, I think You can go with 10.7 but leave the 10.6 renamed as vbinball106.exe and set Your front end to use it for table that won't be working for You in 10.7. can be done for example if using pinup popper.
My Virtual Pinball Machine specs: Cab: Created by me in Fusion 360, CNCed and then self built PC: i7-2600k 16GB DDR3 RAM 250GB+500GB SSD, GTX 1080 Screens: 43" LG 4K TV model 43uk6300 / 27" Backglass Monitor 1920x1080/ 1280x1080 DMD Monitor Toys: Real Williams solenoids for flippers, 5 car started solenoids, 3 contactors, gear motor, shaker, Red and Blue Beacon Surround Sound Feedback: SSF (4 exciter speakers + 4 bass shakers) Controller(s): KL25z, Teensy LED: PF Matrix, PF Sides, Undercab, Speaker Rings, Flipper buttons leds, 4 small Strobes Front End: Pinup Popper
I’m in the process of building my cab now and I’m installing tables into pinup popper, I used the baller installer and of course it runs vpx 10.6. After downloading and installing this T2 version it said it needs 10.7. Just curious, are you running the 10.7 update exclusively or as a separate emulator in pinup popper like how major Frenchy’s video describes?
Joe Lemire, Yes, I'm using 10.7. Had no problems with it.
@@AllPinballFanatic Thanks for the reply. I was trying to figure out if I wanted to make the full change or just add it in, Most likely looking into that this evening. Thanks for sharing!
Joe Lemire, I think You can go with 10.7 but leave the 10.6 renamed as vbinball106.exe and set Your front end to use it for table that won't be working for You in 10.7. can be done for example if using pinup popper.
Please share your system specs and monitor model/type... It's beautiful and very realistic
My Virtual Pinball Machine specs:
Cab: Created by me in Fusion 360, CNCed and then self built
PC: i7-2600k 16GB DDR3 RAM 250GB+500GB SSD, GTX 1080
Screens: 43" LG 4K TV model 43uk6300 / 27" Backglass Monitor 1920x1080/ 1280x1080 DMD Monitor
Toys: Real Williams solenoids for flippers, 5 car started solenoids, 3 contactors, gear motor, shaker, Red and Blue Beacon
Surround Sound Feedback: SSF (4 exciter speakers + 4 bass shakers)
Controller(s): KL25z, Teensy
LED: PF Matrix, PF Sides, Undercab, Speaker Rings, Flipper buttons leds, 4 small Strobes
Front End: Pinup Popper