Hi Taylah, any chance you can do a video on how to buy from Alibaba? I’ve tried a few times and end giving up. I’d love a video from you that would make more sense!
Yay! Don’t get discouraged by your industrial there will be a learning curve,they are much different than domestics everyone that gets a industrial goes through it I was in a sewing funk when I finally received my industrial I didn’t sew for a few months but once I got on that thing I fell in love. I have the juki DU-1181N and I use it for bag making, I destroy domestics lol
I love my Juki, make sure for every 8 hours of sewing you oil it to keep it quiet and for it to perform its best! I also noticed with mine in the past several years even if you don’t think your needle is bad chance it when you oil it!
Congratulations!! How awesome 👏 I’m 48 years old and I grew up with both my Mum and Grandma using industrial sewing machines. They have definitely changed since then 😂😂
I bought my industrial machine last year and I’m really pleased with my purchase. It took a little time to get used to but I couldn’t go back to a domestic machine now. Yes, the motor is very quiet so no problem sewing late at night time lol. My machine isn’t computerised like yours but it’s still a real workhorse. Happy sewing ❤️🇬🇧
Congratulations, you made the right choice, Jukis are the best industrial machines. You're workflow is going to be 5 times faster now. And for the table in the middle, IKEA is the best choice. We got ourselves two kitchen elements and put them also in the middle from the room. You're going to get a sturdy table and also a lot of storage underneath, just perfect.
I adore you young lady. What a work ethic!! You should be proud of what you have accomplished already, and do not forget your loving family, their encouragement and help. They will not always going to be available. Your really smart, tightening your work process,,,, sounds like you are growing steady and solid. I will enjoy watching you grow even more and seeing your success will be amazing.
So proud of how far you’ve come! Yeah it’s a big investment but what’s waiting for you around the corner will far exceed your expectations! You deserve this and I can’t wait to see how much more you’ll grow and thrive this year❤️❤️❤️
Congrats to you Taylah! I have been eyeing a Juki for awhile now! It may take me a while longer but I will watch you tackle the learning curve of your new Juki!
I'm so Glad you bought this Juki DDL 8OOOA from Elizabeth Machines company . There service is Second to none. I'M RIGHT Customer for 34 years and stil happy
Bernadette Banner did a vlog of creating her cutting table using IKEA storage units that had me wanting one 🤣 worth checking out for ideas - and she encountered a few snags I haven't seen others discuss.
Probably a bit late for this advice, but regarding your Singer on the shelf being stiff and acting up, that sort of thing will often be caused by bits of thread getting jammed either around the takeup lever mechanism at the top of the machine or in the hook mechanism down at the bottom. Both should be pretty easy to access and clean out: for the hook mechanism you can just unscrew the needle plate and pop out the bobbin case to clean up under there, and for the takeup lever you should be able to remove some panels on top with a few screws to dig out any stray thread bits and lint.
Congratulations! I have the same model, My hubby bought for me for my 2020 birthday gift last Feb 2021. Not fully utilised the performance yet, although I sew almost every other day! And Definitely one of best gifts I ever received so far!
Oh cool!! I just finally upgraded to a Heavy Duty Singer from my beginner sewing machine .. been making masks for family and friends!! I am in BC Canada and I ordered myself some of your scrunchies from Etsy !! So excited they are stuck at the post office in Lillooet but hopefully mail will be delivered next week ! We are snowed in here in Shalalth BC.
So glad I stumbled across your video. I have a 8000A industrial but couldn’t get any advice from the manufacturer on how to program it. I’d be really interested in videos that went through setting the functions (and using them). I’ve fiddled with mine but I can’t fathom what I’m doing! 😂😂😂 loved you video ❤️
I took a closer look at your Juki 8000A in your video and it’s threading and bobbin winding is exactly like my Juki 9000C. If you need any help let me know. I am so excited for you and hope you love your new machine. You will have a hard time going back to a home machine for any straight stitching (though they come in handy for other stitching and as a backup).
Thank you Naomi! I did have a look at the one you suggested but seemed similar with threading and bobbin as you’ve said, I’ve found the bobbin to be so small (even tho it’s the same as domestic size) I go through them so fast I’ve just ordered 20 more so I can have them all ready to go when I’m sewing in bulk 😂
Yep, that's why I've been telling you for months to buy an industrial. I got a secondhand Juki 3 or 4 years ago. The automatic thread cutting and reverse stitching is an insane time saver. But the quality surpasses everything!
I’m So happy for you that you got your Juki industrial. I considered the 8000A before ultimately going with the 9000C. The 8000A is similar to the 9000C. If you need any help let me know. I also have the Singer 4452 that you have and it IS so noisy. I just keep it as a backup.
Love watching you videos. ❤️ I have a question about you Juki 8000a did your come with a knee press lift? I saw that you were using it at the shop. They are tell me it does not come with one. Or does anyone one know
Just call the store they are telling me that you can not install a knee press lift, I hope you don't mind I send the your videos link and a screen shot of you using the lift at the store. So frustrating I have to reach around the back when I make scrunchies.
OMG so happy for you to get an industrial! #goals! My family got Covid so I'm just sipping some matcha and catching up on sub videos. The kids are running around wild like nothing's happened. Luckily we have mild symptoms, but I'm still too sick to sew comfortably.
Thanks so much! So sorry to hear, some of my family does too it’s everywhere here now! Scared to go to markets lol. I hope you and your family feel better asap 🥰
Wow, how did you stay calm during that long drive home with the new Juki on the back of the ute! Looks amazing, and great to have a good pedal that your foot doesn’t have to chase around 😂
Taylah, can you give any tips on making and selling scrunchies, just for the sake of making money for my child's private school. For example, what would little girls prefer, how many scrunchies do you think I should make (it's a smaller school), etc. Should I make anything else? I'm on the PTA and I want to help raise money.
Check out my market photos on Instagram and the patterns I have on the first board (left) of the standing 3 boards, that should give some ideas! Unicorns, rainbows and sparkles are best. I’m not to sure I guess it depends on the school size 😊 I have a bow tutorial on my channel they can be a bit more fiddley if your not used to them tho
@@TaylahRose Thank you for the reply, Taylah! I'll have to grab some glittery fabric. The bows seem to be all handmade so I may not have much time for it. Thanks so much!
I have the same machine. I was wondering if you have figured out how to change the time to 12 hour standard. Mine is on 24 hour military time and it drives me crazy.
I think I'm about to purchase the same Juki! What do you think about the automatic thread trimmer? I saw that you could buy a specific model (the 8000AB-MS) that cuts the threads up super close to the fabric so you don't have to snip manually. Not sure if that's necessary.
I love it! I think it’s already super close and depending on what you make you may not even need to cut threads! I wouldn’t think it to be a necessity for myself but it would be a cool feature!
I have had an issue with my machine just not sewing properly at all once, and It would just not stitch. The reason why? The bobbin area was loose so when it would grab the thread to “use it”, it would get caught on the side of the slot piece, idk what it’s called haha. But yeah I spent 2 hours on something I fixed in 5 seconds
What do you think of that pedal?! I see in a factory and use a different model Juki but it has the same lift-cut-sew pedal. It’s crazy at first but now that’s what I’m constantly trying to do with my brother and Janome home machines and it drives me crazy lol
I have one question. If screen of the machine is broken, are you still able to work with it? Because I have a Juki F 600 quilting sewing machine, in 5 years the screen is broken, all the pattern stitches I have to select via screen but now I can not see anymore.
I don’t think so, I think I would only be able to use the settings it was last on so wouldn’t be able to change things (unless I could do it with the buttons and guess what I’m pressing I suppose)
I’m not actually sure sorry! It came with the table pre made and I think it varies slightly on which store you get the machine from and I think some places even do custom tables! This one is from Elizabeth machines in Melbourne I couldn’t see what size it was with a quick google tho :(
That machine is fk expansive, really! But at the end the majority of us will end up not using or not needing the features that that machine has. But just the automatic threads, thats all Lol 😂
I will be releasing another video before next Thursday! Either Friday night or Monday night (it’ll be my craft room vlog!!!) 🥰🥰
Good morning and..I'm made to realize where you live, every time I see your attire. It is cold here in the U.S. 😅
Hi Taylah, any chance you can do a video on how to buy from Alibaba? I’ve tried a few times and end giving up. I’d love a video from you that would make more sense!
Yay! Don’t get discouraged by your industrial there will be a learning curve,they are much different than domestics everyone that gets a industrial goes through it I was in a sewing funk when I finally received my industrial I didn’t sew for a few months but once I got on that thing I fell in love. I have the juki DU-1181N and I use it for bag making, I destroy domestics lol
Thank you! I’ve worked out the basics so far but there’s so much more to look into it’s amazing!! They definitely make a big difference
I love my Juki, make sure for every 8 hours of sewing you oil it to keep it quiet and for it to perform its best! I also noticed with mine in the past several years even if you don’t think your needle is bad chance it when you oil it!
Thanks so much! I think this one comes up with an oil light which is good, chris mentioned it gargles up the oil aha 🥰
Congratulations!! How awesome 👏 I’m 48 years old and I grew up with both my Mum and Grandma using industrial sewing machines. They have definitely changed since then 😂😂
Thanks so much! They are amazing
I bought my industrial machine last year and I’m really pleased with my purchase. It took a little time to get used to but I couldn’t go back to a domestic machine now. Yes, the motor is very quiet so no problem sewing late at night time lol. My machine isn’t computerised like yours but it’s still a real workhorse. Happy sewing ❤️🇬🇧
Congratulations, you made the right choice, Jukis are the best industrial machines. You're workflow is going to be 5 times faster now.
And for the table in the middle, IKEA is the best choice. We got ourselves two kitchen elements and put them also in the middle from the room.
You're going to get a sturdy table and also a lot of storage underneath, just perfect.
Thank you! It’s absolutely brilliant! I went with ikea and so happy with how everything turned out 🥰
I adore you young lady. What a work ethic!! You should be proud of what you have accomplished already, and do not forget your loving family, their encouragement and help. They will not always going to be available. Your really smart, tightening your work process,,,, sounds like you are growing steady and solid. I will enjoy watching you grow even more and seeing your success will be amazing.
So proud of how far you’ve come! Yeah it’s a big investment but what’s waiting for you around the corner will far exceed your expectations! You deserve this and I can’t wait to see how much more you’ll grow and thrive this year❤️❤️❤️
Thank you so much Tori!! 🥰🥰
Congrats to you Taylah! I have been eyeing a Juki for awhile now! It may take me a while longer but I will watch you tackle the learning curve of your new Juki!
Thank you!
I'm so Glad you bought this Juki DDL 8OOOA from Elizabeth Machines company .
There service is Second to none. I'M RIGHT
Customer for 34 years and stil happy
That Juki is the newest electronic machine and is the best around. Thread cutter, auto lift etc. your gonna love it.
Bernadette Banner did a vlog of creating her cutting table using IKEA storage units that had me wanting one 🤣 worth checking out for ideas - and she encountered a few snags I haven't seen others discuss.
Another amazing channel!
Ooo I’ve never heard of her! I’ll have to check her out and see if we ran into the same problems (mines all done now!) thank you 🥰
Welcome to the JUKI family.....the machines are work horses...to go with your energy
I have the 8700 but I only got it a few years ago and I'm older now. Good for you getting it in your youth, you'll never go back to a domestic.
Congrats Taylah. Am happy for you. 5000 stitches per minute is awesome. You are such an inspiration. 💕💕💕💕
Probably a bit late for this advice, but regarding your Singer on the shelf being stiff and acting up, that sort of thing will often be caused by bits of thread getting jammed either around the takeup lever mechanism at the top of the machine or in the hook mechanism down at the bottom. Both should be pretty easy to access and clean out: for the hook mechanism you can just unscrew the needle plate and pop out the bobbin case to clean up under there, and for the takeup lever you should be able to remove some panels on top with a few screws to dig out any stray thread bits and lint.
So excited and happy for you!! Congrats on the new machine and I can't wait to watch all the new videos with the machine!
Thank you! 🥰
Congratulations! I have the same model, My hubby bought for me for my 2020 birthday gift last Feb 2021. Not fully utilised the performance yet, although I sew almost every other day! And Definitely one of best gifts I ever received so far!
Thank you! It’s absolutely amazing so many functions!
Oh cool!! I just finally upgraded to a Heavy Duty Singer from my beginner sewing machine .. been making masks for family and friends!! I am in BC Canada and I ordered myself some of your scrunchies from Etsy !! So excited they are stuck at the post office in Lillooet but hopefully mail will be delivered next week ! We are snowed in here in Shalalth BC.
Thank you so very much! Hopefully they arrive soon so many delays already and then the weather doesn’t make things easier ☹️😲
So glad I stumbled across your video. I have a 8000A industrial but couldn’t get any advice from the manufacturer on how to program it. I’d be really interested in videos that went through setting the functions (and using them). I’ve fiddled with mine but I can’t fathom what I’m doing! 😂😂😂 loved you video ❤️
I took a closer look at your Juki 8000A in your video and it’s threading and bobbin winding is exactly like my Juki 9000C. If you need any help let me know. I am so excited for you and hope you love your new machine. You will have a hard time going back to a home machine for any straight stitching (though they come in handy for other stitching and as a backup).
Thank you Naomi! I did have a look at the one you suggested but seemed similar with threading and bobbin as you’ve said, I’ve found the bobbin to be so small (even tho it’s the same as domestic size) I go through them so fast I’ve just ordered 20 more so I can have them all ready to go when I’m sewing in bulk 😂
I love my commercial Juki. Your production is going to be so much better and definitely less stress!
For sure! Already amazed with it
So excited for you. An industrial sounds so fun. Can wait to see all the scrunchies make with it.
Thank you mellissa! 🥰
Yep, that's why I've been telling you for months to buy an industrial. I got a secondhand Juki 3 or 4 years ago. The automatic thread cutting and reverse stitching is an insane time saver. But the quality surpasses everything!
An honestly, your price sounds fabulous. I paid $1000 secondhand. So I think you did well
It’s awesome! And definitely a game changer 🥰
Congratulations! I have a industrial machine they are the best....
Yay I love the new sewing machine!! Happy New Year to you and your family
Thank you! You too 🥰
How exciting I have two Bernina’s but when I got my Juki I cried.,
mine is for making leather handbags.
Congratulations 🍾🎉🎈 .
They are absolutely fantastic! Such a game changer 🥰
Did you buy the heavy-duty machine or the standard? I want to sew coats and not sure if this machine will do
Hi, your singer with stiff hand wheel, have you checked your bobbin case for needle strike damage? I had that problem with janome. Good luck x
Thanks Andrea! I ended up taking it back and they refunded it xx not sure what was wrong
I’m So happy for you that you got your Juki industrial. I considered the 8000A before ultimately going with the 9000C. The 8000A is similar to the 9000C. If you need any help let me know. I also have the Singer 4452 that you have and it IS so noisy. I just keep it as a backup.
It’s crazy noisy!! I’ve kept both my singer and Elna as backups and it definitely feels different changing back to them 😂 love the Juki to much
Do you have a channel? I’d love to follow you on the Juki.
Love watching you videos. ❤️ I have a question about you Juki 8000a did your come with a knee press lift? I saw that you were using it at the shop. They are tell me it does not come with one. Or does anyone one know
Hey! I paid extra for the knee press I’m pretty sure but it was an optional extra 💓
Those knee lifts are very necessary for making scunchies and tutes, I am going to order it. Thank you again 💓
Just call the store they are telling me that you can not install a knee press lift, I hope you don't mind I send the your videos link and a screen shot of you using the lift at the store. So frustrating I have to reach around the back when I make scrunchies.
OMG so happy for you to get an industrial! #goals! My family got Covid so I'm just sipping some matcha and catching up on sub videos. The kids are running around wild like nothing's happened. Luckily we have mild symptoms, but I'm still too sick to sew comfortably.
Thanks so much! So sorry to hear, some of my family does too it’s everywhere here now! Scared to go to markets lol. I hope you and your family feel better asap 🥰
@@TaylahRose Thanks hun! Today was easier as far as being sick goes
Hi, Taylah, what size bobbins does your new DDL8000A?
Wow, how did you stay calm during that long drive home with the new Juki on the back of the ute! Looks amazing, and great to have a good pedal that your foot doesn’t have to chase around 😂
Thank you Leigh! Yes loveee the pedal, it’s taking a bit to get used to especially the knee lever but I’ll get there
Congratulations you deserve it and your happy face is priceless
Thank you Kathya! 🥰
u are such an inspiration for me. thx....!!!!
Thank you 🥰
Taylah, can you give any tips on making and selling scrunchies, just for the sake of making money for my child's private school. For example, what would little girls prefer, how many scrunchies do you think I should make (it's a smaller school), etc. Should I make anything else? I'm on the PTA and I want to help raise money.
Check out my market photos on Instagram and the patterns I have on the first board (left) of the standing 3 boards, that should give some ideas! Unicorns, rainbows and sparkles are best. I’m not to sure I guess it depends on the school size 😊 I have a bow tutorial on my channel they can be a bit more fiddley if your not used to them tho
@@TaylahRose Thank you for the reply, Taylah! I'll have to grab some glittery fabric. The bows seem to be all handmade so I may not have much time for it. Thanks so much!
I have this exact machine it’s a beast!
I love mine!
I have the same machine. I was wondering if you have figured out how to change the time to 12 hour standard. Mine is on 24 hour military time and it drives me crazy.
I think I'm about to purchase the same Juki! What do you think about the automatic thread trimmer? I saw that you could buy a specific model (the 8000AB-MS) that cuts the threads up super close to the fabric so you don't have to snip manually. Not sure if that's necessary.
I love it! I think it’s already super close and depending on what you make you may not even need to cut threads! I wouldn’t think it to be a necessity for myself but it would be a cool feature!
Congrats for your new machine 🥳
Thank you 🥰
Love it! Well worth it! When you were talking about traffic, were you saying "pig" traffic?
Haha peak traffic! 🥰😆
I was expecting like 5-10 grand hahaha. Look forward to seeing it in action.
Ooo not quite that much!! Still a massive step up from my $50 machine 😂😂 worth it tho!
Oooooo!!! A new toy. I like it.
I have had an issue with my machine just not sewing properly at all once, and It would just not stitch. The reason why? The bobbin area was loose so when it would grab the thread to “use it”, it would get caught on the side of the slot piece, idk what it’s called haha. But yeah I spent 2 hours on something I fixed in 5 seconds
Glad you were able to fix!! Spotlight ended up just refunding me which was probably the best outcome 🥰
Great choice on that
Congrats on the new machine!
Thanks so much 😊
I am interested the machine sewing, Could you tell me what is shop you bought ?
BOSE rhymes with HOSE. I have a Consew industrial machine. It was purchased from a contractor closing up shop years ago.
So excited for this
I have a industrial and love it! Hope you like yours and it’s going good🤍
Thank you! It’s awesome 🥰
I soooo want an industrial machine.
Just wondering if you’ve ever used your Cricut to cut out fabric for your scrunchies?? Just bought a Cricut today and am excited to try it!!
I haven’t! 🥰 congrats on your purchase they are heaps of fun
Thank you for new video 😍
What do you think of that pedal?! I see in a factory and use a different model Juki but it has the same lift-cut-sew pedal. It’s crazy at first but now that’s what I’m constantly trying to do with my brother and Janome home machines and it drives me crazy lol
I think it’s great!!
I have one question. If screen of the machine is broken, are you still able to work with it? Because I have a Juki F 600 quilting sewing machine, in 5 years the screen is broken, all the pattern stitches I have to select via screen but now I can not see anymore.
I don’t think so, I think I would only be able to use the settings it was last on so wouldn’t be able to change things (unless I could do it with the buttons and guess what I’m pressing I suppose)
Maybe you need to give a name to your wonderful new machine. My industrial goes by the name of ‘Matilda’ !!
Taylah Rose how big is your table for your machine please
I’m not actually sure sorry! It came with the table pre made and I think it varies slightly on which store you get the machine from and I think some places even do custom tables! This one is from Elizabeth machines in Melbourne I couldn’t see what size it was with a quick google tho :(
I'm so happy for u Sweetheart those srunchies will be flying off the machine it's gonna make life easier for u congrats Hugs be safe😻
Thanks so much Gracie 🥰🥰
Congrats love it
Thanks you!
That machine is fk expansive, really! But at the end the majority of us will end up not using or not needing the features that that machine has. But just the automatic threads, thats all Lol 😂
Very good and very nice 👍👍👍👍
So cute
On time
so weird that you didn’t do your intro!
Chris is my best friend s brother in law
It is bigger than the one you did yuse are you going to still yuse your ether one
💝💝💝
Chris is my best friends brother in law
So nic
A very good vidio
I want to contacte you plise 💖