Peugeot 208 catalytic converter warning Light on Dashboard
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Peugeot 208 catalytic converter warning Light on Dashboard
how to simple resolve problem reset check engine light
V46 fault katalysator code
Possible Causes
Leakage in Intake and or Exhaust System
Catalyst faulty
Oxygen Sensor s faulty
Oxygen Sensor s Control faulty
Possible Solutions
Check Intake and Exhaust System for Leaks
Check Catalyst
Check Oxygen Sensor s
Check Oxygen Sensor s Control
Perform Oxygen Sensor s Aging Check
Be careful
take full responsibility for the incorrect installation or malfunction you bear.
Mines a 1.2 petrol
2014
Had the same problem I sealed the the joint your showing and then it was still blowing, it's a common problem on this model. I just took the cat converter off and the heat shield around it to find a big crack on the metal, just paid a welder a tenner to weld it. Now its perfect 👍
Hope it helps
Also it done that engine light on mine coz the sensors are getting false readings coz of crack so high emissions
Great on my was catalytic to, after visit in exhaust pipe garage the weld me to and now working perfect
Oh dear, I hope they fix it
P1338 I have 2015 208 Peugeot style I get this code running rough
Great video. I am still unsure what was wrong with your car? You had air leaking from somewhere?
lick from catalytic converter
Where can I find a fuse for the oxygen sensor? Plz
Palpably oxygen sensor its not fused separately
I have the same problem in my Peugeot 208-2013 with the catalytic showing the warning light on dashboard, but when i go from the back of the car i see white smoke coming out from the exhaust pipe. Couldn’t find the problem if it was in the engine cylinders or the catalytic converter.
On my was capitalistic converter and smoke still go out from exhausts pipe when was issue
Mine is pegeout 2008 showing "Service " word in red color in the bottom RPM dashboard but without the service key in the km dashboard .. I don't know what does this mean ?!
Same me
Do you say the resolution?
Like me
Everything in this car looks like it was made with recycled materials... Thanks for sharing
excellent live ECO Green :)
@@jabbatellyou
my salary is eco if that counts 😂 do you still have problems with this car?
@@indianajones5929 not after welding CAT. all done, no more problems
Hi, my check engine light on today . It say catalytic converter defect . But I have change it one month ago . Anyway I erase the code and check engine light gone . So my question is will it come back again. If so how long it will take to come back. Thanks
Golf 5 ( 2008 )
1.4 patrol engine
Hi yes after when you release just fault and not repair issue, this warning light come back, good idea please check any leaks around yours catalytic and cat to
Hi any one can answer plz , I have 308 Peugeot Active HDI there is a problem with the speed sometimes speed stuck on the motorway is 37 to 40 between for long time and sometime the card even go to 91 , 80 , 85 the mechanic was saying there is a problem with the additive pump but after we put new pump there is a same issue any expert can you please help me with this issue what to do thank you
Hi I had similar problem with VW Crafter, two of them problem is fuel pump - not enough delivery and after car come to limb mode, but self reset after turn off and on again
it's a known issue a small crack that needs welding same issue i had with my 2015 308 t9
Okay so welding helps 😎🤘
Mine is pegeout 2008 showing "Service " word in red color in the bottom RPM dashboard but without the service key in the km dashboard .. I don't know what does this mean ?!
looking like time to do service
@@jabbatellyou I don't think so , this message doesn't relate to Service time as per the owner manual but related to the motor oil shortage.
The service time is indicated by a wrench 🔧 in the main display not in the rpm display.
@@TamerEldegwy so one can you do just connect diagnostic device and see what is problem
@@jabbatellyou no need for a diagnostic device , I figured it out , it is an oil shortage problem.
@@TamerEldegwy ohh okay :)
I have the peugeot 2008 year 2016, scanned and showed fault with the electric control fan unit.
After replacing this unit no service light came on for 2 days.
But after 2 days it came on and the check light stays on. Any suggestion?
Best Idea Scan and repair issue other way error, fault, come back to dashboard
👍
how did you update your software system
Please check my others video
thank u bro for information ⚘
you welcome :)
Split converter just weld it
I have the same probleme
most of 208 catalytic converter just simple cracking on the button, after welding at exhaust pipe garage working fine no more errors
and 308's too any 1.2
3 cylinder has this issue
@jabbatellyou where which garage did you go to and how much they charged to fix it?
Those 208s are known for splitting the cat underneath...
Cat is still healthy another ways cracking and licking