Santa needs to refill your tool box Scotty! Love your videos, don't stress about your content, it is always great to come home from work and see your videos, they are are always entertaining and down to earth.
Give it a go scotty with the tool reviews we are all for interesting and informative videos and any help on a good tools for cheap or better then other tools for reasons is greatly appreciated 👏 😎
This video has got me so happy already just at how happy you are you've been able to reorganise your shed properly I know that feeling it's such a massive win when you get your shit sorted
One tip with them quick connect lines, push the fitting into itself, then push the plastic retaining clips into the line fitting and pull, works a treat
Fuel filters are a bastard Scotty, even on my Holdens, they are a pain! Another thing you could do if you need more tools is have a wish list for tools on your website & build a wall to hang said tools with the donators name on it. It doesn't have to be flashy expensive tools but every little bit helps. A mate of mine a while ago had his windscreen wiper motor break while it was pouring with rain. He was driving back from work at the time. He contacted me & asked him to get a new wiper motor from the wreckers near me which I got for him. He pulled up to my place & we had to replace the wiper motor while it was pissing it down with rain. The both of us were drenched to the bone. We got it going again, but I never want to do a job out in the driveway ever again with a ton of rain about.
I’ve done a starter motor on a vin in the bunnings carpark in 39 degree heat. Luckily imlachs the wreckers around the corner had one 😅 So you could say I did the Job twice.
Quick tip for you Scotty, I got caught with this one too! Cut a 2 inch piece of black 13mm irrigation hose and slice it on one side. It inserts into the clip without breaking it and you can reuse the clip. Great show and loving this content. Cheers
Somehow I don't think you'll be getting a Kmart endorsement any time soon Scotty, haha! Great episode mate... this shows what it's REALLY like fixing up an old car on a budget!
I used to have a 1973 HQ 202 six cylinder red motor and I used to walk into Kmart (or Target) and get plugs points and condenser no worries………. At one point you could buy a sporty intake manifold and the brand was redline and I think I bought one for about 75 bucks in 1990. You could get tools pliers and those Chinese socket sets then after about three months would break but they got the job done on the day - spark plug remover tools oil filter remover tools all sorts of belts and they had ignition lead sets for all the common Holdens and Fords Them were the days……
Ford fuel filters are always fun. SZ 2015 Barra Territory, the clip end was actually fine, the threaded end was cross threaded. From factory!! So had to purchase a new line, and that became a 2 day job.
G'day mate, delete the filter and relocate it. use a ba filter and a couple of bits of pipe that have the nut fittings on the ends, clamp it in along the chassis...... cheers Btw, 25 bucks to get the bonnet struts regassed........
Here's a 'life hack' that you should try; Using disposable baby nappies to mop up liquid spills. They're even more absorbent than rags. I've seen a few people do that and it works well.😅💡
This is the most relatable car video I have ever seen.. haha You and I have the same struggles and balances. This is what everyone getting into cars needs to see. The stuff isn't easy, especially rolling around on the ground and you have OEM stuff to work with. I'm super excited to see the progress on this! I know you can do it. I'm not familiar with the Australian Falcon platform. Aside from turbo parts, are there cheaper knock off parts for that inline 6? Head studs, gaskets, etc?
@AndyWarren sounds awesome. I see Dodge has realised how good inline sixes can be, it'll be interesting to see how this hurricane engine does long-term
We've all had days like this. That was a big ass spider ! Living in the Redwoods of Northern California we have a lot of Black Widows. I think you guys call them red backs. I had a bunch living on my car when it was outside until I sold my other car. Rolled the car back into the shed and found all those spiders had moved into my shed too w/ the car ! Biggest one's body was around 18mm
Wish you were closer to NSW Central West, Scotty. I’m after a factory rear spoiler for my AU project but nothing at the wreckers that’s not already buggered and I’m not keen on a fibreglass copy. I love your channel mate, please keep up the awesome content. I wish I had a dollar for every time a quick little job took eleventy thousand times longer than expected. One of my all-time bests (worsts) was the fuel filter in my dad’s (now mine) AU ute. Running crap under load, didn’t use proper flare nut spanner and stripped the hex on the filter. Swore for several days, then replaced everything else I suspected, including coils, plugs and leads. Turned out to be a bad MAF sensor (Windsor 5.0). 🤦♂️ The old fuel filter is still going strong, with a slightly butchered hex at the outlet end!😉😂
I remember when you could buy Guns and Ammunition at Kmart in Wangaratta. Carburettor kits, spark plugs, points, condensers, all filters and you sit down and have lunch as well. How things have changed and I agree strongly that K mart is selling cheap landfill
Those filters arent too bad,cut a piece of aluminum can about twice the size of your thumb nail and push that down into the quick connect as you push the fitting against the fuel filter,works mint.
I had the same problem changing my fuel filter back in the day, i ended up just using regular fuel line with worm clamps from the filter back to the tank, a bit of struggle getting the hose over the factory barbed snap fitting barbs but it worked
Talking about tuning and not sure how you'll go with it and the budget. If cant afford a j3 chip youll have timing to worry about as well. We once had a series 1 vn backyard turbo set up with a a seperate injector in the charge pipe on a hobbs switch from memory. All i know is it wasnt running off boost and when it was on boost took signal from an injector in the rail. A cleveland 72 degree thermostat has the same dimensions as 4l according to tridon , if you kept it cool enough youd be more ping resistant and the computer will be in rich warm up mode to help with more fuel too.
Not sure if anyone has mentioned these for the fuel filter removal but you can get a set of tool pro ac & fuel line disconnect set from supercheap. Cheers Daz
As always, 10/10 A+ Thats right Bro, You, building the drag challenge commodore ute would have taxed the living crap out of your family's relationship, my friend earn those brownie points back, and look after your family, you look after your family number 1, and your family will always look after you, Cheers Scotty.
I would suggest getting some large cardboard boxes fridge boxes I have found to be best to lay on under the car makes a world of difference. Also that spider is your anti theft device lol personal security for the AU
Not gonna lie id be happy to see the budget go double. Down the track.. Then triple it ?! Only if its kinda cool or the times are close to something decent, hahh easy when isnt my money of course
@@blownhemi the fuel cell was more of a safety sort of idea. And the wheel well can be blanked off with a flat piece of metal pop rivets and some silastic also help for quick change of diffs if anything was to happen
Hows that Au boot for rust? Even my 13Fg boot succumbed to the deadly rust at the bottom seam and above. That was with the rubber bungs removed back in 2014 to let the water out. No good Ford AU.
Start off by saying I’ve never built a race car but….😂 seeing as it’s only ever going try drag racing, would it be possible just to run save money on inter cooler and piping and just have water/methanol injection kit to cool the intake temps? Only mentioning it as I’ve seen a few other channels do it. Thanks for all the awesome content. Cheers Pat
@@blownhemi-- easy way out will be to remove the two sun visors, so the spider won't have any were to hide, plus the extra weight loss will be HUGE !!!!!!
Regarding the rear spoiler I’d like to see further testing. A few runs with it and a few without. Sure it may or may not cause a bit of wind drag but on the other hand the weight might aid traction 😂. I agree on Kmart. it used to be good but these days I call it the sh!T Shop.
Let's all get together and hunt down the idiot that invented those quick connect fittings, probably typical automotive engineers that have never worked on a car,and see how they like it when we give them a quick connect fitting of their own 😂😂😂😂😂😂😂
Or don't use the pliers and get the little set of plastic tools for disengaging quick fit connectors. Or make one out of a pen that is the right size. Chop a bit off 20mm long and split the side.
I know at the start of this project you said you wouldn’t go around asking all your good suppliers for free go fast parts. Which you could and easily run 12s. I was thinking after 12s for 2k you get another au go around ask for go fast parts and see what you can run.
That could be interesting to show off in the channel... Goto the pump works at science works (for those that don't know the "home base" of the interceptors was actually filmed just outside Melbourne)
5 hours into a ten minute job … yeah, that’s never happened to me before 😂
That’s nothing, usually my 10 minute jobs turn into 24-48hrs
I wish
@@honestpat7789 a 10 min job can become a week long headache easily
Wow that torch is brighter than most people’s futures 😅
Santa needs to refill your tool box Scotty! Love your videos, don't stress about your content, it is always great to come home from work and see your videos, they are are always entertaining and down to earth.
Give it a go scotty with the tool reviews we are all for interesting and informative videos and any help on a good tools for cheap or better then other tools for reasons is greatly appreciated 👏 😎
Every 10 minute job is one busted 20c part away from being a 5 hour job. Got to love cars haha. Keep smashing it Scotty!
Family comes first mate so no stress, we're still here. That's what us dads and husbands gotta do, as they say happy wife happy life.
True that!
I reckon tool reviews would be great especially cheap tools for back yarders like me on a small budget
This video has got me so happy already just at how happy you are you've been able to reorganise your shed properly I know that feeling it's such a massive win when you get your shit sorted
@Solar-t1n it needs a re-sorting already, but I am chuffed to fit three cars in there
Happy wife = happy life Scottie... :) Also, I'd put the spoiler back on! Screw the internet! Lol
yeah it looked much better with it and it probably doesn't even weigh 1kg
One tip with them quick connect lines, push the fitting into itself, then push the plastic retaining clips into the line fitting and pull, works a treat
Yeah, that's the other type of fitting, not this unfortunately
remember Scotty, it's not hoarding if it's tools.
I agree with this statement
Fuel filters are a bastard Scotty, even on my Holdens, they are a pain!
Another thing you could do if you need more tools is have a wish list for tools on your website & build a wall to hang said tools with the donators name on it. It doesn't have to be flashy expensive tools but every little bit helps.
A mate of mine a while ago had his windscreen wiper motor break while it was pouring with rain. He was driving back from work at the time. He contacted me & asked him to get a new wiper motor from the wreckers near me which I got for him. He pulled up to my place & we had to replace the wiper motor while it was pissing it down with rain. The both of us were drenched to the bone. We got it going again, but I never want to do a job out in the driveway ever again with a ton of rain about.
@1969Risky that's a great idea regarding tools, and getting rained on while working on a car is the worst.
@@blownhemi Even Repco, Autobarn & Supercheap gift cards for the tools that you might need that have a bit of weight on them.
@blownhemi done a clutch on an old FWD Rover on jackstands and in the snow. That was a pretty glum experience
@philgrimsey3637 I bet
I’ve done a starter motor on a vin in the bunnings carpark in 39 degree heat. Luckily imlachs the wreckers around the corner had one 😅 So you could say I did the Job twice.
More weight in that bloody spare tyre well then the spoiler 😅 I’d be cutting it out and putting a Ali sheet over the whole 👌
See you crawling under cars makes my body ache scotty 🤕 all for a good cause 👍 looking forward to this series 🚘
Always keep cash on you for when power goes out. Can’t beat the power of cash
@@colinmiles9390 amen
Quick tip for you Scotty, I got caught with this one too! Cut a 2 inch piece of black 13mm irrigation hose and slice it on one side. It inserts into the clip without breaking it and you can reuse the clip. Great show and loving this content. Cheers
I respect how you are working on the ground good inspiration for people trying to mod in the barkyard 21:09 hoists are overrated
5 hours into a 10 minute job I've never felt something like that related so hard 😂 cars
I PMSL. That is every second weekend for me.
Scotty needs a car hoist at home we think. I have to admit as I hate being under the car.
@colinmiles9390 yeah, it would be nice. Maybe one day I can get Scotty's Garage to the level where we can hire a workshop that we can fit a hoist to
@ I thought if I put it out there some company would donate you one for Christmas!! Bit of positive thinking bro 👊👍👌
Somehow I don't think you'll be getting a Kmart endorsement any time soon Scotty, haha! Great episode mate... this shows what it's REALLY like fixing up an old car on a budget!
I don't think anyone would want a Kmart endorsement these days.
@@blownhemi we lost Kmart in the USA no big loss lol
Like the Haullass shirt. Harry is with you
Some one sponsor Scotty some new shoes his running semi slicks. Love ya videos mate keep pumping them out
I used to have a 1973 HQ 202 six cylinder red motor and I used to walk into Kmart (or Target) and get plugs points and condenser no worries………. At one point you could buy a sporty intake manifold and the brand was redline and I think I bought one for about 75 bucks in 1990.
You could get tools pliers and those Chinese socket sets then after about three months would break but they got the job done on the day - spark plug remover tools oil filter remover tools all sorts of belts and they had ignition lead sets for all the common Holdens and Fords
Them were the days……
Remember when kmart had a gun section?
Also Scotty you should have checked the fishing section, would've found some Jarvis Walker needle nose fishing pliers.
Yep, things were a lot simpler back then.
Yeah, I remember when K-mart had guns. I used to buy guns and ammo from Toyworld in Mudgee
@@blownhemi Toyworld? Wow!
Some tool reviews would be cool to see.
Ford fuel filters are always fun. SZ 2015 Barra Territory, the clip end was actually fine, the threaded end was cross threaded. From factory!! So had to purchase a new line, and that became a 2 day job.
Sounds like a nightmare, I hate when stuff comes from the factory like that!
G'day mate, delete the filter and relocate it. use a ba filter and a couple of bits of pipe that have the nut fittings on the ends, clamp it in along the chassis...... cheers
Btw, 25 bucks to get the bonnet struts regassed........
@@gregm959 someone has sent me new ones
Here's a 'life hack' that you should try;
Using disposable baby nappies to mop up liquid spills. They're even more absorbent than rags.
I've seen a few people do that and it works well.😅💡
Use size 6 haha
This is the most relatable car video I have ever seen.. haha You and I have the same struggles and balances. This is what everyone getting into cars needs to see. The stuff isn't easy, especially rolling around on the ground and you have OEM stuff to work with.
I'm super excited to see the progress on this! I know you can do it.
I'm not familiar with the Australian Falcon platform. Aside from turbo parts, are there cheaper knock off parts for that inline 6? Head studs, gaskets, etc?
@@AndyWarren there's stuff available but not quite as much as there is for Barra's
@@blownhemiI’m hoping the 4200 Inline 6 takes off here. A friend of mine built a turbo 4200 and put it in a 68 Firebird. Will be at Sick Week
@AndyWarren sounds awesome. I see Dodge has realised how good inline sixes can be, it'll be interesting to see how this hurricane engine does long-term
@ the 7.3 Godzilla has great potential right now but they’re pretty expensive
@AndyWarren great potential, but we've seen some failures from them as well. Coyote seems to be the pic right now
Leave the spoiler on if you like it don't think it will make a difference cheers mate
If you unclamp the Power Steering cooler tube, you can lift it above the Intercooler.
It fits, no mods needed. Can even re use the Clamps.
We've all had days like this. That was a big ass spider ! Living in the Redwoods of Northern California we have a lot of Black Widows. I think you guys call them red backs. I had a bunch living on my car when it was outside until I sold my other car. Rolled the car back into the shed and found all those spiders had moved into my shed too w/ the car ! Biggest one's body was around 18mm
@i976scirocco3 yeah, that's a massive redback for sure
@@blownhemi Not a friendly spider ! She and her spider friends are gone now...may they rest in piece.
Wish you were closer to NSW Central West, Scotty. I’m after a factory rear spoiler for my AU project but nothing at the wreckers that’s not already buggered and I’m not keen on a fibreglass copy. I love your channel mate, please keep up the awesome content. I wish I had a dollar for every time a quick little job took eleventy thousand times longer than expected. One of my all-time bests (worsts) was the fuel filter in my dad’s (now mine) AU ute. Running crap under load, didn’t use proper flare nut spanner and stripped the hex on the filter. Swore for several days, then replaced everything else I suspected, including coils, plugs and leads. Turned out to be a bad MAF sensor (Windsor 5.0). 🤦♂️ The old fuel filter is still going strong, with a slightly butchered hex at the outlet end!😉😂
I feel your pain, sometimes a simple job can turn into a nightmare.
I remember when you could buy Guns and Ammunition at Kmart in Wangaratta.
Carburettor kits, spark plugs, points, condensers, all filters and you sit down and have lunch as well.
How things have changed and I agree strongly that K mart is selling cheap landfill
That's a good description "landfill"
Interesting to watch how it is actually done Scotty👌
Those filters arent too bad,cut a piece of aluminum can about twice the size of your thumb nail and push that down into the quick connect as you push the fitting against the fuel filter,works mint.
I had the same problem changing my fuel filter back in the day, i ended up just using regular fuel line with worm clamps from the filter back to the tank, a bit of struggle getting the hose over the factory barbed snap fitting barbs but it worked
@id10t-q3f Yeah, I'll probably do something similar. It's a shit system
Fuel line removal tool for the win 😁 and a.n lines EFI quick connect works good as
In theory yes, but this is a different fitting to most of those lines
Talking about tuning and not sure how you'll go with it and the budget. If cant afford a j3 chip youll have timing to worry about as well.
We once had a series 1 vn backyard turbo set up with a a seperate injector in the charge pipe on a hobbs switch from memory. All i know is it wasnt running off boost and when it was on boost took signal from an injector in the rail.
A cleveland 72 degree thermostat has the same dimensions as 4l according to tridon , if you kept it cool enough youd be more ping resistant and the computer will be in rich warm up mode to help with more fuel too.
Not sure if anyone has mentioned these for the fuel filter removal but you can get a set of tool pro ac & fuel line disconnect set from supercheap.
Cheers Daz
Different type of fitting. I have the tools you're thinking about
My sedan has a barb on the filter and mackay hose upto the pump pickup, But I believe the E10 cracks, hardens and wears the Rubber hose replacement 😐
Yep that's Melbourne 4 ya 4 seasons in 1 day
I was waiting for Mr Hairlegs to jump onto that hammer and then run up along the handle!!!😂😂😂
@@dazzamac70 haha
4:20 as good as most weather reports on the news really
Ryobi has great usb lithium torch range, 3 different ones all magnetic and one clamps on too, about 50 to 70 bucks each
hot tip - when you decide to kill the jungle in your back yard buy roundup at crt its a farm shop 20 lt for about $180 , you gunna need it
@@norego6237 I just want to trim it back, not kill it.
Glyphosate rules
@@vaughanphillips until it's in your water and food. Which it already is.
@@johnnycapan6566 yea right consistently prune scottys got time and energy for that new utube chanel "scotty's garden "
@@norego6237 Just rude bro, leave Scotty alone and worry about your own garden.Dudes got better things to worry about...
As always, 10/10 A+ Thats right Bro, You, building the drag challenge commodore ute would have taxed the living crap out of your family's relationship, my friend earn those brownie points back, and look after your family, you look after your family number 1, and your family will always look after you, Cheers Scotty.
@@dougycarter9399 thanks mate
I would suggest getting some large cardboard boxes fridge boxes I have found to be best to lay on under the car makes a world of difference.
Also that spider is your anti theft device lol personal security for the AU
I'm a bit worried about the spider taking over
@@blownhemi spider will be doing 12s while you film
Feel for ya. We have all had those days.
Spare wheel well out & .5mm aluminium sheet over the hole, Scotty 😂
Yeah we could be not sure it would be worth it. Probably more weight in the sound deadening
I can see scotty tuning with a j3 as I do 🤘
Not gonna lie id be happy to see the budget go double. Down the track..
Then triple it ?! Only if its kinda cool or the times are close to something decent, hahh easy when isnt my money of course
@@joz1751 yep, that could definitely happen
You need a quick jack lift
there is a special tool for that fitting but the parts joints don't carry them had to get mine from total tools
" Simple easy Job " every mans famous daily line.
Did you happen to mention your Pet Huntsman Spider to your assistant when you pushed the AU off the ramps :-)
@@tony66au oops 😀
Spare wheel well delete and fuel cell next ? Maybe it could be some extra weight deduction?
It could be but how much do I need to remove?
@@blownhemi the fuel cell was more of a safety sort of idea. And the wheel well can be blanked off with a flat piece of metal pop rivets and some silastic also help for quick change of diffs if anything was to happen
@Kmac-je7tv yeah, there's definitely some advantages
Hows that Au boot for rust? Even my 13Fg boot succumbed to the deadly rust at the bottom seam and above. That was with the rubber bungs removed back in 2014 to let the water out. No good Ford AU.
It's pretty good in the boot. But the boot hinge pockets are rusted out
There’s a tool for those fuel fittings Scotty, I got a pretty cheap generic, multi size kit from Auto one I think it was
Different type of fitting
Tool shops are generally better on tools than Auto shops.
Looked like one of those Step away from the car type days 😏 Catch that spider and you'll shave a few kilos 😂😂
Hey Scotty, can you "thread" a cable tie through the fuel filter fitting to eliminate the broken clip?
@jonnoklr7293 I tried a couple things that didn't work, I'm just going to delete the clip setup
Do what you need to do mate…
Good luck 😊
Pretty sure the Ryco fuel filters come with a new clip
I'll check it out
Start off by saying I’ve never built a race car but….😂 seeing as it’s only ever going try drag racing, would it be possible just to run save money on inter cooler and piping and just have water/methanol injection kit to cool the intake temps? Only mentioning it as I’ve seen a few other channels do it.
Thanks for all the awesome content.
Cheers Pat
@@PaddyBoy644 I never found water/meth to be as effective as proper intercooling
fair call mate like I said just a suggestion as I’ve never built a race car myself👍🏻
A 12 second car needs a spoiler. Bring back the spoiler!! 👍
That spoiler may weigh a bit, but the weight is in the right place.
Cut some big holes in that honeycomb bumper support and crossmember with a hole saw
I would also have to cut holes in the bumper as well
I totally forsee in the first run down the strip with this car, spiders instead of a dashmat come flying out at Scotty!
@@mysticgreg no thanks!
@@blownhemi-- easy way out will be to remove the two sun visors, so the spider won't have any were to hide, plus the extra weight loss will be HUGE !!!!!!
@RebeccaGriffin-b8n good tip on the sun visor hiding spot, not sure about the weight saving 😀
I’m in Warragul and it was really windy the other day
Yep, sure was
Regarding the rear spoiler I’d like to see further testing. A few runs with it and a few without.
Sure it may or may not cause a bit of wind drag but on the other hand the weight might aid traction 😂.
I agree on Kmart. it used to be good but these days I call it the sh!T Shop.
Let's all get together and hunt down the idiot that invented those quick connect fittings, probably typical automotive engineers that have never worked on a car,and see how they like it when we give them a quick connect fitting of their own 😂😂😂😂😂😂😂
Or don't use the pliers and get the little set of plastic tools for disengaging quick fit connectors. Or make one out of a pen that is the right size. Chop a bit off 20mm long and split the side.
It's not that type of connector
@@blownhemi So, did you use any expletives that I might not have heard?
@dennisbjones nah, it was all pretty standard
you could also ditch the front sway bar.
@@backyardmechanical it'll happen soon
you squeeze the tabs then push forward and back to release scotty.
@SuperTambo69 yeah, I worked out I was sqeezing the wrong side.
I know at the start of this project you said you wouldn’t go around asking all your good suppliers for free go fast parts. Which you could and easily run 12s. I was thinking after 12s for 2k you get another au go around ask for go fast parts and see what you can run.
@lukeclarke1068 we can always do that later, see how much of a difference it makes
Kmart should be renamed to ANKO. Absolutely everything in Kmart stores comes from ANKO, which is of course Chinese.
Would love to see a burnout build and to see you blowing a set on a pad aha 😂
Lockdown wagon 😂🤷♂️
Kind of looks like you're building something for a Mad Max film, maybe that could be the next thing? 😉
That could be interesting to show off in the channel... Goto the pump works at science works (for those that don't know the "home base" of the interceptors was actually filmed just outside Melbourne)
Scotty, we have secured our car, and made a video(we arent TH-camrs so its nothing fancy). Where did you get the 12s for 2k showplate from?
@matthewcapuzza I got mine from a local guy. It wasn't cheap, they were $80 a plate
just to cheer you up scotty,that was a female huntsman carrying babies,they are live bearers.squashed one once and they were everywhere.
@@gazza116 oh yay
Now it just looks like a old taxi
@@Mattcampbell666 I know, I'm a little disappointed
Bloody Huntsmans
The real side of TH-cam, when nothing goes right, maybe save the spoiler for the red AU?
Some days are diamonds, some days are stone...
Very true
Spoiler back on for the downforce Scotty!
Fkn hope that spider never reappears either...
Yeah, it might go back on yet
Not a bad size Huntsman mate.
@garrymcgaw4745 it was a baby really, I've seen some monsters at my place
@@blownhemi I have nightmares for the next week. Thanks for that mate. 👀. 👍.
👍👍👍
kmart is like shopping at a 2 dollar store now but with higher prices ,
@@lookingoverhell3448 yep, k-mart
the spider is Scottys copilot
@@zevdyerful sounds like a t-shirt or stick design
Ey Scotty, is your garage tall enough for car hoists?
it'll look sick
Unfortunately not
@@blownhemi hmmm aren't there shorter sized hoists that people can install in their home garages?
@Ram84_1 it would have to be very short
@@blownhemi least it'll be more comfortable to work with than ramps ey Scotty? hehe
Put the spoiler back on Scotty, and forget it ever came off
Feel free to postpone the race until labour day/easter/kings birthday or so. We could use a bit of breathing space 😅
@@MRMOPARMAN0426 haha
Do you ever find yourself saying "carnage" instead of "Scotty's garage" just out of pure habit?
Sometimes I have to catch myself. I'm still finding my rhythm
5 hours into a 10 minute job, that's what she said.
Agree Kmart is crap. Made for kids and women. They were good 25 years going.
Yep, 25 years ago they were fine, but now it's like a large bargain warehouse full of crappy stuff
@@blownhemiThe hot wheels cars are the only thing that is still worth buying! And some of their jocks.
And at the 23 minute mark is where I torch the car.
@@anthonystokes5188 haha, I was waiting for that comment
@blownhemi I jumped out of the car I was driving whilst it was moving. Had the wife and kids in it. That's the impact those furry bastards have on me
Fix
On
Rainy
Days
Fix
Or
Repair
Daily
Jokes but they're just as reliable as a Toyota unlike Just Holden Together
Yeah, you didn't approach that filter with enough fear/respect. They're a dog of a thing to do. BA even worse.
please remove the boot and doors uneeded weight
haha