Great video. Just did this for my 2019 Z125 Pro. There is a new rubber gasket covering the headlight bulb now that I didn't see in your video. Almost lost one of the 2 screws holding the headlight fixture to the bike when screwing them back on, lol. I ordered a 2 pack of the LED headlight bulbs for $10 off of ebay. Realized the daytime running light is a smaller bulb after removing it. Had to order the smaller white T10 LEDs too for $1.11 plus tax off of ebay for 20 of them. The LED headlight looks nice and bright even without non LED running light. Thanks for this video. Very helpful.
i install a spare h4 led bulb i had from another bike onto my z125. same buld but the patttern is completely differently. i think due to the reflector in the z125.
There's a black ring with three indexing tabs that slides over the LED bulb. These tabs, two small and one large, insert into the headlight unit and locks it in. You can rotate the bulb within that ring to get the throw/beam pattern you want. I hope this helps.
message me on instagram @SELENE750_ if youre interested in purchasing LED bulbs, i have them for cars and motorcycles and they are plug and play. I ship anywhere in USA. Message me if you even have any questions, my personal instagram is @EGP94 Also check out my install videos on my channel or message me for any help you may need My LED page is facebook.com/LEDsPlugNPlay/
message me on instagram @SELENE750_ if youre interested in purchasing LED bulbs, i have them for cars and motorcycles and they are plug and play. I ship anywhere in USA. Message me if you even have any questions, my personal instagram is @EGP94 Also check out my install videos on my channel or message me for any help you may need My LED page is facebook.com/LEDsPlugNPlay/
What a pointless video. You did not show anything aside from the fact that you have replaced your bulb. The most important, you did not show the light difference .
Great video. Just did this for my 2019 Z125 Pro. There is a new rubber gasket covering the headlight bulb now that I didn't see in your video. Almost lost one of the 2 screws holding the headlight fixture to the bike when screwing them back on, lol. I ordered a 2 pack of the LED headlight bulbs for $10 off of ebay. Realized the daytime running light is a smaller bulb after removing it. Had to order the smaller white T10 LEDs too for $1.11 plus tax off of ebay for 20 of them. The LED headlight looks nice and bright even without non LED running light. Thanks for this video. Very helpful.
Thanks for the tips! Worked great!
i install a spare h4 led bulb i had from another bike onto my z125. same buld but the patttern is completely differently. i think due to the reflector in the z125.
Thanks dude ordering them now
the amazon link for the xk glow bulb does not work - can I have the complete link please?
You in vegas bro ?
A guy on the Z' forum with trouble with this bulb. How did you turn bulb. does it have a Sharp Flat cutoff beam mounted up/down ... Nice video
There's a black ring with three indexing tabs that slides over the LED bulb. These tabs, two small and one large, insert into the headlight unit and locks it in. You can rotate the bulb within that ring to get the throw/beam pattern you want. I hope this helps.
message me on instagram @SELENE750_ if youre interested in purchasing LED bulbs, i have them for cars and motorcycles and they are plug and play. I ship anywhere in USA. Message me if you even have any questions, my personal instagram is @EGP94
Also check out my install videos on my channel or message me for any help you may need
My LED page is facebook.com/LEDsPlugNPlay/
Lovin' your vids...
Thank you. I'm glad to hear that. Thanks for watching!
If u still have it take the reflectors off and put 45 case shells over the ends that stick out
HI Sir
CPS 12V or CANBUS 12V??
You earned a sub!
Are you having problems with water getting into the headlight since you have to take the rubber gasket out?
How are you able to shut the headlight off????
Nice
What kind of bulb is the headlight
Can you update your links?
Bro how are you not gonna show what your unscrewing :/
Instagram?
Not yet, but soon...
message me on instagram @SELENE750_ if youre interested in purchasing LED bulbs, i have them for cars and motorcycles and they are plug and play. I ship anywhere in USA. Message me if you even have any questions, my personal instagram is @EGP94
Also check out my install videos on my channel or message me for any help you may need
My LED page is facebook.com/LEDsPlugNPlay/
What a pointless video. You did not show anything aside from the fact that you have replaced your bulb. The most important, you did not show the light difference .