Port forwarding did not work for me. The only way I could get the game to load was to use my phone as a Hotspot. Today I finally fixed my connection issue by using port triggering instead of port forwarding. I can now play MW without having to use my phone. Hope this helps for those who are still having connection problems.
@@AngelRedond0 3074, 27014-27050, 3478, 4379-4380, 27000-27031, 27036 When I start the game I go to the network info and it shows I'm using port 3074 and NAT is open. When I was using my phone and tethering my PC to it, it would show I was using port 3074 and NAT was moderate, but now that I'm using port triggering it shows my NAT is open. The only thing I did was put the port numbers in on my router, UPNP and NAT is still enabled, I never touched those 2 settings.
PC Windows 10. NAT type was moderate. Followed instructions as much as I could but since my Spectrum router doesnt allow range I had to put "27000" instead of "27000-27037". but now it says OPEN!
For PC users the easiest way is to go into "update and security", click "windows security", click "firewall and network protection", click "advanced settings" then click "Inbound rules", top right corner, then right click "Call of Duty HQ", click "properties", then in the General tab click "Allow if the connection" then click "apply". No app or complicated router configuration
I have done all this and I still cannot find a match on my PC (Steam) I have tried opening all these ports, enabling/disabling UPnP, changing to Google's DNS, restarting game and pc several times but nothing works! It shows NAT Type "Open" in game, which is even more confusing. I'm using the same Ethernet cable and same network as on my PS5, in which I can play. I would really appreciate it if anyone could help me sort this out, I just built a PC and would love to play Warzone :( PS: I have one piece of the powerline adapter connected to the Internet modem, and the other piece on my wall socket, which I use an Ethernet cable to connect into the PC (tried using the powerline network IP for the ports as well as my PC's IP)
Something is weird here, I have never had problems getting an open NAT until WZ2 same setup same PC same router, NAT moderate, frustration brought me here and unfortunately I have the same issue I came here with.
I did this hoping it would fix the matchmaking problem for me. But it didn't.. I tried everything. i cannot find a match unless i play with someone else or if i go and try and play on a console... I dont know why
hey can anyone help mine looks different and i dont wanna mess anything up lol so from left to right on my router website it says, "service name", "source IP", "port range", "local IP", "local port", "protocol". so im just wondering where to put the stuff in his video on mine
Got NAT to open. But I still can't join a game. And my babdwidth is at 0 kbps. And the last digits of my ip is 254.50. There is no 1.-- All i can join is shipment with hackers. Am i shadow ban? I wasn't even hacking. Happened to me twice already.
On the xfinity app it cant find device. It recommends for me to check that im not on ipv6 and that i need to be on ipv4 in order for the modem to find my device🤯
I watched this video not knowing what it was for. Is there some kind of issue a lot of people are having that this fixes? Or is this some sort of thing to do to optimize internet connection in game? I’d appreciate more explanation.
Usually helps you connect to/host lobbies in specific scenarios. Some people have not been able to join eachother (in all COD games) if their NAT is closed on both sides. Limited, of course, limits the lobbies you can be in AFAIK, and open means you can be in almost all lobbies.
Can i just open the ports in my router instead of doing it via windows firewall? Also where did you get those ports from? Typically Activision post them, but they didnt post them for mw2/wz2 after I checked
Hello bro, I have the NAT in moderate, I was able to do the first step but in the part of configuring the router that is at the end I can't find the option you were in, my router is from the TpLink brand :(
I'm using a Tplink router but idk which one is Port Forwarding. In the Forwarding tab of my router, there are 2 options I think one of them is Port Forwarding. One is "Virtual servers" and one is "Port triggering". But I dont know which one it is
Its insane how this is required to have a good experience. I have been a gamer for 20 years and somehow COD seems to be among the only ones who forces this shit and makes sure you know "!!!!!!!!!YouR NAT iS StRicT!!!!!!!!!" when you play the game
Tried Port Forwarding, Port Triggering, UPnP, Firewall Exclusions, Network sharing settings on Windows, Static IP, DMZ and nothing worked. NAT Type is still Strict. If I connect to my mobile phone hotspot, I get Moderate. Should I ask my ISP to assign a static IP for me? Will there be any consequences? Anything else either me or my ISP can do?
Of no help You tell us how to get our ip Then go to some random ass page that can't be found in router settings What do I click wifi properties ect? Advanced tab no port forwarding none of the letters tcp ect where is it man
I just changed ISP and found out I was also on CGNAT (Carrier-grade NAT in aus) all you have to do to fix it, is ring your isp and op out of cgnat and request a public ip because "you need remote access to work from home, access remote security cam's or just need to host servers and open ports. They switched me over in 5 mins, just had to reboot the router and it was done. Don't know where you're in the world but it worked for me in AUS.
When my brother and I play at the same time, we will both have 999ms, but if only one plays and the other downloads anything, there will be no lag> This is a problem that not only affects me, I have seen several cases where the same thing happens, but some say to disable uPnP, use static IPs (Which I cannot, only local)
I have upnp on and I play 2 consoles to.... reverse boost I have zero issues. Make sure you have a cat5e cable in your modem and router, and factory reset the router.
my router seems don't have a port forwarding settings. under Forward Rules, there are only 3 options: DMZ Function IPv4 Port Mapping Port Trigger Configuration maybe someone knows other ways to set this thing up?
Do i need to port forward ? I have this problem below ; For 2 days, i can't join solos-duos-trios-quads battleroyale (Which you can only play at Al Mazrah) but i can join resurgence quads (Which you can only play at Ashika). I can't join al mazrah DMZ but i can join Ashika DMZ. So, as far as i understand , game doesnt allow me to join Al Mazrah map and idk why ... - I try ; - Restart game and PC - Restart and reset modem - Verify game files - Change IP - Disable security wall - Uninstall / Install game - Format PC Is there anybody that can help me ?
Great video. Clean and to the point. Fixed my strict NAT connection. Thanks Lad!
Port forwarding did not work for me. The only way I could get the game to load was to use my phone as a Hotspot. Today I finally fixed my connection issue by using port triggering instead of port forwarding. I can now play MW without having to use my phone. Hope this helps for those who are still having connection problems.
What did you put for Triggered range and forwarded range?
@@AngelRedond0 3074, 27014-27050, 3478, 4379-4380, 27000-27031, 27036
When I start the game I go to the network info and it shows I'm using port 3074 and NAT is open. When I was using my phone and tethering my PC to it, it would show I was using port 3074 and NAT was moderate, but now that I'm using port triggering it shows my NAT is open. The only thing I did was put the port numbers in on my router, UPNP and NAT is still enabled, I never touched those 2 settings.
@@ILLFINGAZ how to use Port Trigger man tell me
Awesome job mate. Followed step by step your tutorial and finally NAT opened on warzone 2.0! Thanks!!
thank you so much. a recent update made it impossible to even sign in to WZ2 on PC now it works perfectly.
Yo haven’t even updated the game yet just wanted to let you know your a god. Please keep it up sharing with everyone I know
Thank you mate, it worked perfectly.
solid tutorial , keep up the good work sir !
My NAT is open. But a few days later he will set it to moderated. More people got this? :(
PC Windows 10. NAT type was moderate. Followed instructions as much as I could but since my Spectrum router doesnt allow range I had to put "27000" instead of "27000-27037". but now it says OPEN!
Worked perfectly for PC
Thanks bro! Best tutorial!
For PC users the easiest way is to go into "update and security", click "windows security", click "firewall and network protection", click "advanced settings" then click "Inbound rules", top right corner, then right click "Call of Duty HQ", click "properties", then in the General tab click "Allow if the connection" then click "apply". No app or complicated router configuration
advaned setting is grey and can't be clicked..........
@@makotomurazakieng6219
Are you signed in or using local account?
@@qubes8728 i genuinely don't have a microsoft account, this PC's owner is my father, he paid the PC and installed all required stuff on it
@@qubes8728 and that's also his microsoft account he's using, i don't have his IDs
wohooo thank you very much now my NAT on PC is fully open hehe
and thx to ApeX Punkill who brought me here :D
Thanks! 🙏🏽
TYVM very helpful
Worked for pc
so much thank you
Awesome video, very well made, didn’t work.
for me too
Same😢
I don’t get how to get to the router section. I mean I got to ur website but like where am I going???
i am trying to do it on microtik using port mapping foollowed the steps and cood now wont let me join oonline servvers
I have done all this and I still cannot find a match on my PC (Steam)
I have tried opening all these ports, enabling/disabling UPnP, changing to Google's DNS, restarting game and pc several times but nothing works! It shows NAT Type "Open" in game, which is even more confusing.
I'm using the same Ethernet cable and same network as on my PS5, in which I can play. I would really appreciate it if anyone could help me sort this out, I just built a PC and would love to play Warzone :(
PS: I have one piece of the powerline adapter connected to the Internet modem, and the other piece on my wall socket, which I use an Ethernet cable to connect into the PC (tried using the powerline network IP for the ports as well as my PC's IP)
I did this but for ports of steam should I do it for pc because it did not work
will this work for the new warzone launched today aswell?
Do you have enable uPnP too ?
Did everything in the video and on the xfinity app I did the ports. Cod still showing nat moderate. Any recommendations?
Thank you, did this tutorial and went from NAT Type moderate to strict, funny thing is that what I said isn't a joke.
I reverted everything I did and it's still on strict 💀
im trying to do this for 2 pc's on my internet and it just says i cant do it since its the same port. any fix?
great job as usual bruddah, im so mad i redid everything only to realize after listening that my IP changed because im on an extender now. lol
Thanks for guide
great video, but what if Im using a LTE phone network is it possible to that, plz relpy
Thank you it works ;)
hello mine asking for comment and mine showing this in port forward section (Src. Port * , Dest. IP Address * , Dest. Port * , Comment * , Protocol)
Can you do a video on how to uninstall only warzone 2.0 ???????
are u mentally challenged ?
Also, it would be nice to set a static ip on your computer :)
this video is legit
thank you
does anyone know how to do it with a fritzbox? menu looks diferent
Thank you, worked as of 2023/07/29
Awesome! Thank u
I got it OPEN now. But my bandwidth is 0 Kbps. That's strange right?
Erf i supposed this can't work with a 4g box?😢
Can I just allow in Firewall 1:03 Program cod.exe and it will open all Ports and create NAT Type Open
u tried this but not working how to solve
Something is weird here, I have never had problems getting an open NAT until WZ2 same setup same PC same router, NAT moderate, frustration brought me here and unfortunately I have the same issue I came here with.
Did you find any solution bro . My COD WAZ 2.0 PC Nat showing moderate
Thanks for the vids but i'm still get HUENEME CONCORD error feel very bad
has anything changed?
Same. It's so annoying. Can't play this game at all
@@jamesharry7475
My problem has been solved. I contacted the internet service provider directly.
I did this hoping it would fix the matchmaking problem for me. But it didn't.. I tried everything. i cannot find a match unless i play with someone else or if i go and try and play on a console... I dont know why
did you figure it out? i have the same problem
@@Arubaduchitera no but i did reset my pc and played one game and i did get into a match.. But id have to test more to see if it its actually good.
hey can anyone help mine looks different and i dont wanna mess anything up lol so from left to right on my router website it says, "service name", "source IP", "port range", "local IP", "local port", "protocol". so im just wondering where to put the stuff in his video on mine
Open NAT what wil it do? It fix what?
Got NAT to open. But I still can't join a game. And my babdwidth is at 0 kbps. And the last digits of my ip is 254.50. There is no 1.-- All i can join is shipment with hackers. Am i shadow ban? I wasn't even hacking. Happened to me twice already.
I went threw everything step by step but still on Moderate NAT on PC
any ideas???
Have you tried restarting your router after port forwarding?
On the xfinity app it cant find device. It recommends for me to check that im not on ipv6 and that i need to be on ipv4 in order for the modem to find my device🤯
I been trying this with my Asus Router and my NAT type in the game still Moderate 😢
I watched this video not knowing what it was for. Is there some kind of issue a lot of people are having that this fixes? Or is this some sort of thing to do to optimize internet connection in game? I’d appreciate more explanation.
Usually helps you connect to/host lobbies in specific scenarios. Some people have not been able to join eachother (in all COD games) if their NAT is closed on both sides. Limited, of course, limits the lobbies you can be in AFAIK, and open means you can be in almost all lobbies.
Ya been port forwarding since blackout. Just ensures ur connection to other players
I can configure NAT in OPEN but is change MODERATE when my bro and me used same time Warzone 2...
Can i just open the ports in my router instead of doing it via windows firewall? Also where did you get those ports from? Typically Activision post them, but they didnt post them for mw2/wz2 after I checked
Would this fix high latency if my nat type is open already?
You ever fix your latency
@@shaec9397 tbh I haven’t touched the game since then lol
@@MLDstxspartan shoots laggy
Still get the disconnected from steam error even with port forwarding everything does Warzone just not like certain ISP's?
Me too
@@bart.pietrzak me 3
Please make a video of how to transfer Warzone 2 from Steam to battlenet
My Nat is moderate help me I don't know
Hello bro, I have the NAT in moderate, I was able to do the first step but in the part of configuring the router that is at the end I can't find the option you were in, my router is from the TpLink brand :(
same here
I'm using a Tplink router but idk which one is Port Forwarding. In the Forwarding tab of my router, there are 2 options I think one of them is Port Forwarding. One is "Virtual servers" and one is "Port triggering". But I dont know which one it is
virtual servers will be your port forwarding
Its insane how this is required to have a good experience. I have been a gamer for 20 years and somehow COD seems to be among the only ones who forces this shit and makes sure you know "!!!!!!!!!YouR NAT iS StRicT!!!!!!!!!" when you play the game
It was working, but now not more wtf. More people got this problem?
dude why that bandwidth is 0 ???
Tried Port Forwarding, Port Triggering, UPnP, Firewall Exclusions, Network sharing settings on Windows, Static IP, DMZ and nothing worked. NAT Type is still Strict. If I connect to my mobile phone hotspot, I get Moderate. Should I ask my ISP to assign a static IP for me? Will there be any consequences? Anything else either me or my ISP can do?
ME PASA LO MISMO , INTENTE TODO Y NO TENGO SOLUCION :C
i cant get NAT Open, even with DMZ enabled. What does this mean?
your internet provider is blocking those ports
It works
so no need for 25565?
That's minecraft 🤣
Of no help
You tell us how to get our ip
Then go to some random ass page that can't be found in router settings
What do I click wifi properties ect? Advanced tab no port forwarding none of the letters tcp ect where is it man
if u r using tplink it's called Virtual Servers or something like that... u can get your ip by typing ipconfig in cmd
sad cgnat here :C
I just changed ISP and found out I was also on CGNAT (Carrier-grade NAT in aus) all you have to do to fix it, is ring your isp and op out of cgnat and request a public ip because "you need remote access to work from home, access remote security cam's or just need to host servers and open ports. They switched me over in 5 mins, just had to reboot the router and it was done. Don't know where you're in the world but it worked for me in AUS.
When my brother and I play at the same time, we will both have 999ms, but if only one plays and the other downloads anything, there will be no lag>
This is a problem that not only affects me, I have seen several cases where the same thing happens, but some say to disable uPnP, use static IPs (Which I cannot, only local)
add a static ip to the secondary console then add that to the router and problem solved, yes you can do this its standard procedure
I have upnp on and I play 2 consoles to.... reverse boost I have zero issues. Make sure you have a cat5e cable in your modem and router, and factory reset the router.
Depends on your router and how it handles traffic.
YEA MINE IS ON STRICT :(
hehe we have the same wallpaper
This Video Is Useless when you get to the Router Settings
my router seems don't have a port forwarding settings. under Forward Rules, there are only 3 options:
DMZ Function
IPv4 Port Mapping
Port Trigger Configuration
maybe someone knows other ways to set this thing up?
enable DmZ to your pc/consoles ip will do everything for you
Sweet! Already had the rules set up just didn’t have the destination IP address. Sorted! Thanks
Thumbs up left 👌
Do i need to port forward ? I have this problem below ;
For 2 days, i can't join solos-duos-trios-quads battleroyale (Which you can only play at Al Mazrah) but i can join resurgence quads (Which you can only play at Ashika).
I can't join al mazrah DMZ but i can join Ashika DMZ.
So, as far as i understand , game doesnt allow me to join Al Mazrah map and idk why ...
- I try ;
- Restart game and PC
- Restart and reset modem
- Verify game files
- Change IP
- Disable security wall
- Uninstall / Install game
- Format PC
Is there anybody that can help me ?
will this work with a eero mesh router?