MELCloud Tutorial How to install and configure MELCloud

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ก.ย. 2024

ความคิดเห็น • 26

  • @leszekkrystek1491
    @leszekkrystek1491 5 หลายเดือนก่อน +3

    no connection since yesterday in my two devices (heat pump and AC) exactly same behavior as below (blinking unit error, Net)
    tried to connect using different methods and different routers even hot spot from mobile phone to be sure that home internet is not an issue. This looks for me like Mitsubishi BUG after software update or something like this.
    It's impossible that two devices have broken in the same time....

    • @alexvostinariu4608
      @alexvostinariu4608 5 หลายเดือนก่อน

      Same to me, two diferent devices without connection

    • @miravladyka8477
      @miravladyka8477 5 หลายเดือนก่อน +1

      I spend today like 2 hours trying to make it work. Ive done everything correct ive done it few times before. Like you i try different wifi numerous factory reset on unit even my whole wifi setup, nothing works. I had unit disconnected from power few months so i thing something broke during winter. Now i read you guys have same issue. Im mad :D

  • @gnomax1
    @gnomax1 2 หลายเดือนก่อน

    Imagine buying a television or some other household device and having to go through this kind of torture just to connect it to Wi-Fi. And this crap won't connect. I will never again buy Mitsubishi air conditioner after this!

  • @Amanda-sf3fx
    @Amanda-sf3fx ปีที่แล้ว +1

    yeah…what if the Net and Unit lights flash ALTERNATELY…..?

  • @Hyggebuffet
    @Hyggebuffet 5 หลายเดือนก่อน +4

    This has always worked for me (for two years now). Now after I complete all these step to reset it still ends up blinking all UNIT, NET and ERROR. What to do? I tried rebooting everything: wifi rooter, mecloud app and the interface.

    • @Hyggebuffet
      @Hyggebuffet 5 หลายเดือนก่อน +2

      @@russbramley1270 apparently it’s an issue all over Europe, at least Finland and Belgium.

    • @allthebest8334
      @allthebest8334 5 หลายเดือนก่อน +1

      And Sweden… 😢

    • @plamenahristova3990
      @plamenahristova3990 5 หลายเดือนก่อน +2

      In Bulgaria too😢

    • @matteobucefalo
      @matteobucefalo 5 หลายเดือนก่อน +1

      Also in Italy... I am not able to configure a new device

    • @keeley1978
      @keeley1978 5 หลายเดือนก่อน +2

      And in the UK…I’ve only had my units two days and thought I had done something. It lost connection about 830pm BST yesterday for me.

  • @flatcap6263
    @flatcap6263 7 หลายเดือนก่อน

    What do they use the same app to control the air source heat pump? When it clearly should not come on when the room is above the set temp ( air con would be required if the room was hotter than required) Mitsubishi heat pump control are the worst think you could have if your life.

  • @YolandaYuste
    @YolandaYuste 5 หลายเดือนก่อน

    Hi guys, it's working now and I didn't have to do anything. I'm in Spain. Hopefully it will work for everybody. Good luck

    • @davidalbaladejo9785
      @davidalbaladejo9785 2 หลายเดือนก่อน

      Hola. Soy incapaz de enlazar de manera avanzada. No consigo acceder al router una vez conectado al módulo wifi

  • @Chetecoy2001
    @Chetecoy2001 ปีที่แล้ว

    Todo es control y muchas mentiras

  • @marcvandesande6180
    @marcvandesande6180 7 หลายเดือนก่อน

    Work perfect for me WPS.