Customer says there is no one that can program their car!

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 16

  • @markdasparkauto1780
    @markdasparkauto1780 15 วันที่ผ่านมา +1

    Great setup

  • @odishoyoukhana3747
    @odishoyoukhana3747 14 วันที่ผ่านมา +2

    Can you do it with a used TCM?

  • @bypass9690
    @bypass9690 16 วันที่ผ่านมา +3

    just a curious question but the go diag has a key off/on switch why is the box you use better?

    • @mikeb2063
      @mikeb2063 15 วันที่ผ่านมา +2

      The only thing I can think of is the resistor in that box in conjunction with the godiag is giving proper resistance reading for communication. I could be wrong though, I’ve never bench programmed anything and have 0 experience with the godiag, and my background is heavy diesel not automotive so procedures more than likely are different than what I’m used to. I’m interested to find out as well, since I plan on buying a godiag for home use as I’m the family mechanic.

  • @bigo975
    @bigo975 15 วันที่ผ่านมา

    When are going to add xentry and ista to your online class?

    • @L1Training
      @L1Training  8 วันที่ผ่านมา

      So ista and ODIS are coming very soon!

  • @renatairmarius123
    @renatairmarius123 16 วันที่ผ่านมา

    Hi thaks for video.

  • @acedog699
    @acedog699 16 วันที่ผ่านมา

    Thx bro amazing video I love shit like this hopefully I'll be able to afford 1 of those devices 1 day

  • @jackiemay9471
    @jackiemay9471 16 วันที่ผ่านมา

    yes please interesting informative

  • @nickayivor8432
    @nickayivor8432 16 วันที่ผ่านมา

    KNOWLEDGEABLE

  • @brro9017
    @brro9017 16 วันที่ผ่านมา +1

    !!!!!You are missing a lot of detailed information on this, what about solenoid adaptations, what about coding, you also need to check software/flash.... no offense but I think this video is misleading,,, you just copied the Immobilizer info over,,, the job is not complete, the vehicle will not drive/shift correctly this way,,,, you are missing alot of importance steps,,,, this is not a simple nissan/ford/tcm programming job.... you are missing important steps, this job is not complete!!!!!!!!!

    • @L1Training
      @L1Training  16 วันที่ผ่านมา +3

      Correct, and all of that is discussed with the client as it is a mail In job. As I do not have the valve body.

    • @brro9017
      @brro9017 16 วันที่ผ่านมา +1

      You can use the autel to program/change the software/flash on the TCM, and the same with scn coding. You don't need XENTRY, and you dont need the vehicle. Autel will do it all, just need the right/correct steps.

    • @dtnel
      @dtnel 14 วันที่ผ่านมา

      @@brro9017 OMG!!! if you wanna show Keith how to do it he will have a class in January and if you’re willing to teach that class for him, I will buy a ticket and come out and pay just to watch you teach his class….
      I’m sure Keith wouldn’t mind being a student for a weekend …..
      Just for clarification, I have not taken the class that he’s teaching in January but if you wanna see more in depth coverage on how he teaches his classes just subscribe to his channel.
      And I hope TH-cam isn’t your first place that you learn how to do this stuff because he’s not here to teach people how to do it on TH-cam….
      Yes, you are correct. There’s so much more that isn’t covered on TH-cam about this. My guess would be he could quickly make a video, put out a call for a video that would get dropped within a few hours and I feel he has all the i’s dotted and the t’s crossed.
      If I just had to imagine it for a minute, there was probably three pages of documents on what too and what not to do that got shipped back with that module to where if the customer didn’t read it it was their own fault…

    • @ShiroUwUs
      @ShiroUwUs 9 วันที่ผ่านมา

      ​​@brro9017 to do the job correctly and not cut corners, xentry is needed you cant snc code properly with autel, it runs off daimler