#Subscribe #WS18X #Computed 35Hz ~ 150Hz I used B&C 18RBX100 but you can also use any subwoofer to get the same outcome. God bless everyone and keep safe!
Muy buen video, gracias por compartir y por la ayuda, entendí todo solo de cuanto serían de ancho las maderas para las salidas de aire de antemano gracias
Hi, There is another plan on YT for this WS18X and it have only 355mm long bass port, while yours have 468mm long ports. I have OG martin Audio drivers, but what version of the box shall I build? Did you measured the port legth of an OG box, or you made some calculations?
@@mrflexysmps5826 I have some DLS846 drivers b&c pzb100 (and not the tbx100), so its lower powered, but hopefully will work fine with the longer port and lower tuning freq as well.... or I can cut it back anytime later on. Any advise?
Is this drop around 250 Hz seen in the initial graph normal? Can someone tell me something? I understand that the box cutoff point is probably going to be below that, but I I draw attention. I want to try an L18P300 RCF in one of them. Has anyone tried it? Thanks
Great job, can you up the martin audio ws218x subwoofer cabinet design?
15 inci vc 5 inci.buat dalam ruangan😊😊😊😊😊ngak salah lagi Bang😂😂😂
I liked it very much, please upload the video of the JBL 15 "speakers
Son las medidas originales de la Martin audio ws118x???
Exelente bafles modernas para bajos .
Lalim nito bro ah 32hz sarap nyan
Nice thanks sir👍♥️♥️
I wanna build 4 of those for some 21's
This work with B&C tbw100 as well?
Can it work for Byc 18DS115-8 3400 watts???
Will these work as a powered sub using a Ram Audio SB-3K plate amplifier?
Yes it will
Would this work with b&c tbx100 as well?
yes
Muy buen video, gracias por compartir y por la ayuda, entendí todo solo de cuanto serían de ancho las maderas para las salidas de aire de antemano gracias
Hola muy bien
Por favor suban el ws218 Martín
Original como ustedes saben
Hi,
There is another plan on YT for this WS18X and it have only 355mm long bass port, while yours have 468mm long ports.
I have OG martin Audio drivers, but what version of the box shall I build?
Did you measured the port legth of an OG box, or you made some calculations?
i made this play lower mate
@@mrflexysmps5826
I have some DLS846 drivers b&c pzb100 (and not the tbx100), so its lower powered, but hopefully will work fine with the longer port and lower tuning freq as well....
or I can cut it back anytime later on.
Any advise?
Thank you so much for sharing this video 🙏
Dual WS18X subwooper plan with computation the next video
Keren
Nice job ! Please tell me tuning frequency of these box.
Me gusto mucho
Kitna watt ke liye thik hoga sir
i can use the B&C 18 PS100 ?
Martin vs Cerwin.sama mata😂😂😂
I cant use 18 sound lw 1400 ?
And I am using a Faital Pro 18FH 510
cool!
Is this drop around 250 Hz seen in the initial graph normal? Can someone tell me something? I understand that the box cutoff point is probably going to be below that, but I I draw attention. I want to try an L18P300 RCF in one of them. Has anyone tried it? Thanks
I'm about to try it out with some rcf speakers .
It's port resonance, very normal
Do you have boxes to faital 18hp1030?
bc tbx100 is driver forthis
Can it work tbw100.
it will
15" plis,..
Nice project. Compatibe with RCF LF18X401 sub? Yhank you
bc tbx100 is driver for this
yes mate
And bc pzb100 is driver ? Good or not?
Hm boss ganyan box martin audio d18
Would this work with b&c tbx100 as well?
yes it will!