I subbed so that I don't lose this parts list! I'm also working on an S/B frameset with 200mm rear clearance for a 19" NBPower QS273 and was thinking real hard about the front end setup... I honestly think this bike is going to be scary
Just changed my front end out to 2023 surron forks that I found for very cheap locally and man are they better then the zoom forks. Definitely would recommend getting a good front end setup.
On your video with the new sabvaton controller where did you get the alarm that is attached to your keys and how did you connect them with the key switch?
i use a separate alarm that I mounted under my seat. Here is a link: wsdcam 113dB Bike Alarm Wireless Vibration Motion Sensor Waterproof Motorcycle Alarm with Remote a.co/d/7gWLFWK
You chose a frame with a leak size of 177 mm and an engine with a leak size of 150-155 mm, so how did you manage to put the engine in the rear swing arm?
To be honest I'm not sure if a mid drive would fit on this exact frame that I have. I've seen people run mid drives on other custom enduro ebikes so maybe it would be possible but the frame is meant for a hub drive motor. It even has torque arms built in specifically for hub drive motors.
Hey my friend just recently wrecked mine and I have fixed everything so far all I need now is new forks(they got split in half) what is a good website for the front forks, I really need them
Remember if you’re building a battery, the tools and technical know-how will not save you money on the first battery. If you plan to be making 4-5 to sell it’s worth the investment but I would be extra careful on your taxes.
I am finding decent, used A123 batteries at about $0.60 each, or about $100/kwh. These batteries are bulletproof and can be soldered with no damage. They are also capable of 50 amps per cell!
It will save money if: you already have a few tools, you buy high-performance cells on sale in bulk, and you want a certain performance standard. I have built five batteries and they are all Samsung 40t 72v between 80- 150 amps. This is less expensive than buying a quality high performance pack.
@@TheSorterslol no they are not. And they have tiny capacity. You would have to buy 3x the amount just to equate to 1 18659 and even then it would be a low cap one. That battery would be such a pain in the ass to build too. So many potential points of failure. Not to mention the additional Weight you’re taking on. It’s not advisable to use 123a
Hi im form poland and i wanted to ask if there is any possibility to deliver the frame to polish? unfortunately, aliexpress ebay and amazon do not deliver to Poland. are any thoughts?
My bad I forgot to put them in the description! Here is a like: www.aliexpress.us/item/2251832684301425.html?spm=a2g0o.order_list.order_list_main.15.26391802lNODEq&gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
Hey I got a question bro, so you recommend I invest in a better pair of brakes ? I know the motor kit comes with some but I’m in the process of holding mine so before I complete I’m debating to put more $$ into it and buy a separate brake system rather than the one nb power comes with? Mines gonna be street use only
The magura mt5 or mt7 brakes are amazing from what I have heard from. Pretty sure the mt5 brakes come stock on surrons and people say they are great as long as you have some decent brake pads. The brakes I have are 4 piston zoom brakes but I wouldn't recommend them for offroad use they might not be the worst for street use. They definitely have the power to lock up the wheel up but they are just really cheap. I had a brake line start leaking on my rear brake but they did send me a replacement. I would invest the extra money and get magura brakes if I were you.
Not a fan of that charging port location. My clone has it at the top where gas would go in. Nice build dude. How hot does your controller get under full load, full speed and going uphill?
I don't have any hills in my area so I can't really tell you how hot it gets under serious load but I am usually going full throttle or sending it on trails and I've had no over heating issues at all.
hello, i am building a similar bike to yours but i am using 20in bicycle tires. How high is your 19in build? if i buy the front wheel that say on amazon it is a disk break will I be able to put hydraulic breaks on it?
Hello and many thanks for your videos that gave me the idea to build my own. One question, surely stupid, why are there pedals, chain and else on those models because it is unusefull to make it work. Is it a legal reason so that it is better to look like a bike more than a motorcycle ? Or else ? Thanks a lot and best regards from France 🇫🇷
The chain and pedals is for aesthetics and legal reasons. 10kw 50MPH Ebikes aren't legal unless you get them legally registered. So with the pedals you are able to make the bike considered an "Ebike". If an officer sees you just pull to the bike lane and slow down but worst case they pull you over you can simply explain that its a 750w ebike and they will let you go.
I run it at around 80A to not drain my battery as much but you can expect 50 mph. My motor is also 3.5T which is mean for more speed rather then torque.
You are going to have to custom fabricate new brakes for that because bike brakes are totally inadequate for it. Thanks for the video especially the part list, I've blown out the forks on mine already. Edit: The forks suck. They aren't what are on the bike. Bad link!
These brakes bite amazing if you bleed them and get good pads?? I agree the forks suck for anything other then street riding. I plan on switching them out for KKE forks.
I look at the fork and understand that something is wrong) Because the legs are erased. It is similar to my first fork. And then you say that it is zoom. That's crap, to be honest... I switched to dnm both front and rear.
Until these things are $2k and under, just get a gas bike. Same costs, more fun, WAY faster/safer. I saw that total bill of over 4k and it killed my ebike vibes.
the frame are so expensive. I think if you have a blueprint, you can hire someone else to cut and weld it with better materials, probably still at the same price
I subbed so that I don't lose this parts list! I'm also working on an S/B frameset with 200mm rear clearance for a 19" NBPower QS273 and was thinking real hard about the front end setup... I honestly think this bike is going to be scary
Just changed my front end out to 2023 surron forks that I found for very cheap locally and man are they better then the zoom forks. Definitely would recommend getting a good front end setup.
Could you please tell me what size you bought the special bolts you mentioned in the video, 18mm or 33mm, or which one? Great video, BTW!
measure your bracket spacing
Hi have u go link for charger thanks
Can you make a detailed video on how to wired the brake light?
Need
where did you get the moto seat ?
On your video with the new sabvaton controller where did you get the alarm that is attached to your keys and how did you connect them with the key switch?
i use a separate alarm that I mounted under my seat. Here is a link: wsdcam 113dB Bike Alarm Wireless Vibration Motion Sensor Waterproof Motorcycle Alarm with Remote a.co/d/7gWLFWK
If the swing arm is 177 mm and the wheel motor is 155 mm, how is the installation done?
I just ordered my fat tire stealth bomber frame. I cannot wait for it to come in
any way to get it to nl for cheap? the frame
You chose a frame with a leak size of 177 mm and an engine with a leak size of 150-155 mm, so how did you manage to put the engine in the rear swing arm?
Did you have to cut off the bottom kickstand bracket to get the stand to work?
Is there a way i can build a bike similar to this that doesn’t need pedaling to start like a sur ron or a talaria ?
Your best bet is just to buy a surron or talaria. You can look for a used one if you want to save some money.
what size was the shock bolts
hey i wanted to use the enduro frame to make an ebike is it possible for the bafang or any pedal motor would work with this bike?
To be honest I'm not sure if a mid drive would fit on this exact frame that I have. I've seen people run mid drives on other custom enduro ebikes so maybe it would be possible but the frame is meant for a hub drive motor. It even has torque arms built in specifically for hub drive motors.
@@arthurbal damn do u kno of any frames thats similar that the bafang could fit? i really like this style no kizzy
Hey my friend just recently wrecked mine and I have fixed everything so far all I need now is new forks(they got split in half) what is a good website for the front forks, I really need them
Nevermind got the ones you got
How to screw fender to kke suspension and where i can get that?
Will a 17 inch hub motor work with the 19 inch front wheel
Yh
Remember if you’re building a battery, the tools and technical know-how will not save you money on the first battery. If you plan to be making 4-5 to sell it’s worth the investment but I would be extra careful on your taxes.
Do you think is it worth to build these and sell?
@@serhatvarli3869 potentially. You would be talking about bulk ordering ten bikes worth of parts and probably struggle to find the first few buyers
I am finding decent, used A123 batteries at about $0.60 each, or about $100/kwh. These batteries are bulletproof and can be soldered with no damage. They are also capable of 50 amps per cell!
It will save money if: you already have a few tools, you buy high-performance cells on sale in bulk, and you want a certain performance standard.
I have built five batteries and they are all Samsung 40t 72v between 80- 150 amps. This is less expensive than buying a quality high performance pack.
@@TheSorterslol no they are not. And they have tiny capacity. You would have to buy 3x the amount just to equate to 1 18659 and even then it would be a low cap one. That battery would be such a pain in the ass to build too. So many potential points of failure. Not to mention the additional
Weight you’re taking on. It’s not advisable to use 123a
Can you show building it?
Hi im form poland and i wanted to ask if there is any possibility to deliver the frame to polish? unfortunately, aliexpress ebay and amazon do not deliver to Poland. are any thoughts?
If you can go online you can get the measurements from the advertisement. Then go and ask welders in your country to make the frame
how much of the red wrap did you use? or buy?
1ft by 5ft
Will the frame fit a 8,000-12,000 watt motor?
Can you make a vid on how to install the back fender?
How’d u get the fender to fit? Did u use larger screws? I have the same forks but the fender doesn't fit at all
why dont you add pegs?
The brake mounting bracket on the Zoom brakes is 51mm, but the mounting points on the forks is 75mm. Did you use an adapter?
what throttle are you using? the one that comes in the kit with the rear wheel? if so is it a half hand or whole hand throttle?
Do the fenders just easily hookup? I have more or less the same bike, but I can't find fenders anywhere
How did you get the front fender to attach ? What the adapter ?
where did you get your bike stand?? this will be my next build .. coming from a voilamart 1200 watt hub kit. 🤣
Dirtbike stand from harbort freight
I just noticed are those grips and throttle from the jetson bolt pro
Where you get the axle for the front and back
How did you install the rear lights
does the zoom fork fit motorcycle wheels?
any way to get it to nl for cheap? the frame
Where did you get those things on your motor, please send me the link!!
what's the link for the bolts on the rear suspension?
My bad I forgot to put them in the description! Here is a like: www.aliexpress.us/item/2251832684301425.html?spm=a2g0o.order_list.order_list_main.15.26391802lNODEq&gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
hello there is so many sizes which one did you pick I'm stuck please help
@@arthurbal hello there is so many sizes which one did you pick I'm stuck please help
Hey I got a question bro, so you recommend I invest in a better pair of brakes ? I know the motor kit comes with some but I’m in the process of holding mine so before I complete I’m debating to put more $$ into it and buy a separate brake system rather than the one nb power comes with? Mines gonna be street use only
The magura mt5 or mt7 brakes are amazing from what I have heard from. Pretty sure the mt5 brakes come stock on surrons and people say they are great as long as you have some decent brake pads. The brakes I have are 4 piston zoom brakes but I wouldn't recommend them for offroad use they might not be the worst for street use. They definitely have the power to lock up the wheel up but they are just really cheap. I had a brake line start leaking on my rear brake but they did send me a replacement. I would invest the extra money and get magura brakes if I were you.
@@arthurbal thanks man will look into the Maguras and keep you updated 🙌🏾🔥
Hey bro where can I get these type of spacers for the kick stand? Or what’s the name of these kind of spacers
Please respond! If it’s all plug and play then what wires need to be soldered? And would shrink wrap be beneficial to it instead
Where did you get the stand
How did you build your own battery
I used 18650 cells and spot welded them. 20S 10P configuration. 150A BMS
what size are the bolts for the rear show on aliexpress, about to order mine but i want to make sure im getting the right size, i have the same frame
Not a fan of that charging port location. My clone has it at the top where gas would go in. Nice build dude. How hot does your controller get under full load, full speed and going uphill?
Yes!
I don't have any hills in my area so I can't really tell you how hot it gets under serious load but I am usually going full throttle or sending it on trails and I've had no over heating issues at all.
So if I click ever one of those links and buy it, I can build this in my room right? That’s EVERYTHING type of description?
What's the top speed?
The best setup bro❤
Thanks for this! And also to all the other commentors!
Also what about cranks
Killer build
What about the charger link
hello, i am building a similar bike to yours but i am using 20in bicycle tires. How high is your 19in build? if i buy the front wheel that say on amazon it is a disk break will I be able to put hydraulic breaks on it?
Hello and many thanks for your videos that gave me the idea to build my own. One question, surely stupid, why are there pedals, chain and else on those models because it is unusefull to make it work. Is it a legal reason so that it is better to look like a bike more than a motorcycle ? Or else ? Thanks a lot and best regards from France 🇫🇷
no basically the motor automatically moves the chain
The chain and pedals is for aesthetics and legal reasons. 10kw 50MPH Ebikes aren't legal unless you get them legally registered. So with the pedals you are able to make the bike considered an "Ebike". If an officer sees you just pull to the bike lane and slow down but worst case they pull you over you can simply explain that its a 750w ebike and they will let you go.
عليها ان تكون ك دراجة الهوائية و تبدو رائعه بذالك +
Dude thank you
Please help me with a chain. I want a gold 1. What size & strength do I need? Allt je AliExpress ones say 7,8,-12s on them
Hey bro what are you looking at top speed wise ?
45-50mph
Isit possible to mKE 1 like this 1000w/?
Hello man i like the vilo 🎉 do you have one
Bro do you have to brake in these brakes or something ? 😂 I bought them and tried them out but they aren’t as good ..
what tyres are they?
19in both front and rear
Do you have a link for the tyres?
Whats your top speed with the 100amps sabvoton controller?
I run it at around 80A to not drain my battery as much but you can expect 50 mph. My motor is also 3.5T which is mean for more speed rather then torque.
Top speed??? Awesome build
50MPH
nice bike
Why do much just built mine for 2k
What parts you used?
You are going to have to custom fabricate new brakes for that because bike brakes are totally inadequate for it. Thanks for the video especially the part list, I've blown out the forks on mine already.
Edit: The forks suck. They aren't what are on the bike. Bad link!
These brakes bite amazing if you bleed them and get good pads?? I agree the forks suck for anything other then street riding. I plan on switching them out for KKE forks.
@@arthurbal Himalo shocks are decent too, in between Zoom and DNM forks interms of price and performance which makes them perfect.
@@SRNAR8 I just put on some surron forks and they are so much better then the zoom forks.
I look at the fork and understand that something is wrong) Because the legs are erased.
It is similar to my first fork. And then you say that it is zoom. That's crap, to be honest... I switched to dnm both front and rear.
I agree they suck for anything other then street riding. I plan on switching them out for KKE forks.
Irdered from Alibaba this would cost about 3000 delivered
Got to be a cheaper place to get a frame
Until these things are $2k and under, just get a gas bike. Same costs, more fun, WAY faster/safer.
I saw that total bill of over 4k and it killed my ebike vibes.
the frame are so expensive. I think if you have a blueprint, you can hire someone else to cut and weld it with better materials, probably still at the same price
do you have a contact number?
I have the same sthealth Bomber model but I have some questions, could you help me?