Pivot Irrigation Problems
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- We will be irrigating until the first or second week of September… so we still have a ways to go. I hope you guys are learning a lot about irrigation! Be sure to tell Grant congrats on his first big farm purchase !
Buy some Laura Farms shirts (like the one I'm wearing in today's video) here! - www.caz-gear.c...
SPONSOR YOUR VERY OWN CORN PLANT HERE!!
Thank you to my patrons who are putting me through college!! Right now the annual membership to sponsor a corn plant, receive direct messaging, and exclusive updates is 10% off!!
LINK: www.patreon.co...
Send me your favorite snacks!! Or stickers! Or letters!! Or things that are special to where you're from!! I love it all. :)
Laura Farms
PO Box 536
Aurora, NE 68818
Here's where else you can find us!
Facebook - Laura Farms
Instagram- @laura_farms
Twitter- @laurafarms_
Tik Tok - @laurafarms
Patreon - Laura Farms
Venmo - @carlsonlaura
Shirt Size - Small/Medium
Sweatshirt Size - Medium
Grant- (Laura's Husband)
Snapchat- the-grantwilson (add him for great stories)
Instagram- @grant_wilson_
Twitter- @makingafarmer
Shirt Size - XL
Hello,
my name is Paolo and I am writing to you from Italy.
I thank you because you show me the deep face of the United States of America, not Hollywood but beautiful people, real, who with hard work live the dream that they themselves build, day by day.
Best wishes to you and your husband Grant.
Paolo, Desenzano del Garda Lake Italy.
So refreshing with no cursing, vulgarity or disrespecting authority and parents who care and do their job. Nice channel
A 50/50 mix of Acetone and Synthetic automatic transmission fluid will be the best rust penetrant you will ever use. Also always use Anti-Seize on all your bolts when re-assembling anything you plan on servicing later. Enjoying the content!
One thing to keep in mind, before starting work on parts exposed to the elements like that, use a small wire brush to clean the bolts and nut threads and douse with some penetrating oil. Give it a few minutes to soak in and most will come off easier. But there will always be the "one."
Ha guys just thought I stop by saying hello
Loria you are a gorgeous young woman you both are Glenn
All the better if you know the night before. Ride out on the 4 wheeler and douse everything with PB Blaster.
these two are the best, operating an angle grinder in shorts... original.... Am I the only who thinks Laura, her dad and Grant are the best at what they do....
Well done Laura, never be ashamed to ask for help, those who don't usually end up hurt. Congratulations on Grant and Laura Wilson starting to acquire their own farm equipment, you have to start somewhere and it doesn't have to be a big tractor or combine. Looking forward to seeing more of your farming life, as much as you can safely share. Laura Farms was my first, and has led me to several others. To me you will always be at the top of my list, take cafe, be safe and farm on.
Go Grant, everything starts slow, but I see that motivation, you'll make it.
Suggestion: Discuss w/Grant & your Dad the long term advantages of: #1 - Put a 'Never-Seize' product on threads every time you have to put to on parts like splines, mating surfaces, bolts & studs, etc. This includes anything new you might have to ever service. Long term experience is a quantum help in the future. #2 - Consider adding a quality Penetrant to your 'GO' kit. WD-40 is vegetable based & is good, but better overall results like having fewer broken Bolts & Studs if you're first using a Penetrant on visibly corroded screws, nuts, etc. Thanks for the Nebraska Farmer's Metal Head Music!
Not in any way trying to be a smart a** but as soon as I read this she was using wd40..... all great suggestions though !
Im ex marine and groundscare, Grease everything, everytime if its outdoors. Denso tapes where its at😎!!WD’s good stuff, if you can come back tomorrow. Lube the shafts and the bolt shanks, let the nuts rust on n snap/replace the bolts, quick n easy.
You read my mind! I always paint everything with no seize because I know that I will probably be working on it again and why not make it easier?
The only thing WD 40 IS good for is cleaning your hands.
@@trentjohnson7246 (you probably already know this) WD 40 means "Water Displacer, attempt #40". It was designed to be a water displacing chemical created for the military back in WW2 to dry out the engine ignition systems on jeeps, tanks, etc. It was never designed as a lubricant in fact it washes away oil. It is a naptha and mineral spirits based solvent. It is good to keep steel and iron from corroding. I use it to spray on firearms and let dry (don't wipe off afterwards) for long term storage. It works almost as good as cosmolene. It's also good for removing tar and asphalt from vehicle fenders/paint.
You've shown us that patience and common sense are valuable parts of farming...thanks!!
A 5 gallon bucket makes a great tool carrier and seconds as a catch all for fluids and nuts and bolts. Not to mention it can be used as a stool when the job starts to beat you down and you need a place to sit.
Yes it does Brother
I never use my angle grinder without a full face shield these days. When a disc shatters, it's not very fun. Or when you have a wire brush on and it's shooting little metal bristles at your face.
This advice cannot be understated. Full face mask and keep the guard on it. Also remember to approach the cut from the correct side of the wheel.
After seeing what *can* happen, most people never risk it again. You can do this thousands of times with no incidents but it only takes one time to make a believer of you.
Being an ed doc I qgree 100%
30 years is a pipe fitter and welder I can give you an Amen to that🤣🤣🤣
I've seen "pivots" but never close up. I'm an industrial mechanic/electrician so I enjoy watching you work on equipment Laura! Not many of you left in America. Great Job!
You are by far the prettiest farmer I have ever seen!
Beautiful woman. You always seem to have such a positive attitude, no matter what life throws at you, and you possess something that is rare among a lot of "younger people" these days.. you aren't afraid to get at it and get dirty. Stay safe and keep playin in the dirt !!
Never a cop-out to ask for help!! You did the right thing Laura! Always better to ask if you're not 100% certain.
Congratulations, Grant and Laura on your purchase! Pretty exciting.
It's never a mistake to ask for help, you did a good job well done 👍
I love it when Dad shows up to help. There's lots of highlights in these videos, but that's always one for me.
always carry some overalls with ya so when you need some extra coverage you got it!!!!
All pumped up fixing the Pivot's cracked knuckles. Dad and daughter find it was a grind and two man job that saved the day
Wow! Imagine a world where all women, and man for that matter were as capable. You two are ahead of the game.
Congratulations on the Machinery purchases I hope they're in very good condition! Laura because you were frustrated you were having a tough time conveying what you were thinking but we already knew what you were trying to say. Count to 10 slowly taking deep breaths, surprising how much it helps.
We do love farming. Ranching not too bad either. Did notice even in fast-forward after a day of servicing Tibbetts okay voice-to-text and autocorrect you can put down Tibbetts but I said pivots there's no need to go to the gym and pump iron!
I'm a new subscribers but I've worked on a farm for most of my working years and we had a pivot system and they do have to have a lot of work to keep them going. Enjoyed it stay safe out there 👍🤞🤠🍑
But Laura ! You look good doing the job, whether completed or not!!! Lol ! American Farmers, can fix anything with almost nothing and have it done yesterday ! You ROCK ,
Don't let any one complain about you being under dressed love it haha
Gooooooood Morrrrrrrrrrning! Yes, we love farming, and we all love watching you solve problems, turning wrenches, and driving tractors. Looking forward to watching Grant pick up his new units.
This is my favorite video so far.
Pivot Irrigation Problems......... BUMMER DUDE !!!!
I'm a 40 year old male and I still call my Dad to help all the time.. AND Safety first. Good to see you realized you did not have the right protective clothing on to do that job with the angle grinder.
nice purchase grant, exciting.
Yes I agree with everything Dennis fox says below, even using a angle grinder that grinds off little pieces of hot metal but it's not really super hot and even the way you're dressed you could angle yourself and or the grinder so it really doesn't hit your legs. Thank you for the farming videos from Illinois reminds me of a lot.
Grant, Congrats on your winning auction... enjoy running your own planter next season. You might even be able to rent it to your Dad. :)
Working on pivots…BUMMER DUDE!
😀
I would never have guessed that it's worthwhile to have two very expensive pieces of equipment if they only get used once a year inside a window of a few weeks. But this channel teaches a lot. Please do share more info about how you strategize on which equipment will be worth the investment!
If Emma Chamberlain had a business degree and worked on a farm she might be half as fun to watch as Laura. … maybe.
Stay Gold. Much respect for the hard work and positive attitude.
Really proud of these young adults. Not an easy job. Keep it up!🌽🚜🧑🌾
I'm so glad that you stepped back and let your dad do the angle grinder. Yes, you were improperly dressed, but more importantly, you were seriously missing the proper safety gear. Proper, ANSI safety glasses are a must! Those sunglasses don't stand a chance against flying pieces! Also, the guard was missing off the grinder!
Great video Grant good luck with your new planter and tanks
i love your dads way of thinking
It’s best to walk away when frustrated, calm down things usually go better later..👍👌😉😊
Congrats Grant on you new planter!
Safety first Laura - safety first
Need to carry a jump suit with you to put on for just that type of work !
Safety tip of the day never use an angle grinder without the guard It increases the chances of you cutting yourself elf and also the disks can potentially shatter and come apart Sending pieces flying everywhere please always use the guard
Totally agree with you on that one! Any size shape or thickness of any abrasive blade can explode. I worked on the track Department for the railroad and it took a few years when we switched over to abrasive saws to find blades that could handle the speed and Heat. The potential got worse as the rail got taller and the base wider the diameter of our abrasive saw blades went from 14 to 16 to 18 in in diameter and spun at the speed of a chainsaw. It was tough to see in the winter with a face shield goggles and safety glasses on with your welding leathers and your chainsaw leggings but we're worth it , you just hope the guard on the saw protected the other important regions.!.!
Got hit in the chest by a shattered disc. Its like a very very solid punch. It happens so fast, there is nothing you could do. My working clothes protected me, only a bruise. It was a cutting disc, and i guess someone had used it for grinding, which is a total no go. Should have looked at it before using it.
Sometimes the guard gets in the way and you have to take it off
It was good to see the ear defenders but sunnies are NOT safety glasses. After you have detonated a couple discs you will gear up better.
Laura is too cute. Beauty and brains!
Congrats on the planter and tank purchase! Laura, you know all about Murphy's law now! I will tell you more about that when I meet you all here in February! If anything can go wrong, then it will! My rule is "maximum difficulty and frustration" with almost everything anymore. Yes, never run a grinder or a welder while dressed in shorts or short sleeves. Glad that you at least had some eye protection on there girl! Love those smiles and videos. I will be thinking of you guys while at the state fair today (Ky state fair here is all about agriculture as well as being a festival).
I love your content and I'm learning alot from you, Please put the guard back on the grinder I know it's annoying but my mate says different the blade broke and nearly and I mean nearly cut the veins in he's wrist and at the time he was by him self I can not stress the importance of those annoying guards after knowing and hearing what happened to my mate
Calling the mouse out made my day i had to repeat video
Cool pivot! We have a lot of those around where I live.
Where is the angle grinder guard??
Love.what you,and grant are doing. Safety glasses, young lady.
Better still, a full face shield / visor. Safety glasses/goggles will protect your eyes, but they provide no protection to your face being ripped open by a disc when it explodes. Also, you need to check the date on every disc before you use it - in the UK and probably Europe and I hope in the USA, they have an expiry date marked on them, after which they should not be used. I was shocked when a flexible backing disc (for a sanding disc) exploded when I was using it, and bits of hardened rubber flew everwhere.
@@ianm452 I agree.
Interesting home-made socket storage.
a simple 30 min job on my 7.3 powerstroke sometimes can take half a day.. I know the feeling.. Awesome Video
Good luck fixing your pivot Laura
Your dad is a wildman.
Tools are very intuitive - they just know. My dad used to say, " you have to be smarter than the tool you're using."
Good job done Laura! Always ask the Boss(Dad) for advice or help! Good move!
So adorable, so strong and capable
Wow! Really cool video Laura!
Your dad is a really funny person a little bit crazy maybe❤❤❤
Can I suggest finding the safety guard for that angle grinder that mounts on the spindle?
Yes angle grinders can kill you get a guard ASAP.
And screw the handle to the tool for safe handling. Trust me, I know from experience!.
@@ttarp929 WHS. The side handle is there for a reason, & you may find yourself picking up several fingers & a thumb from the floor/dirt under where you are working as you tell yourself 'Oh _that's_ why they said always use the side handle'.
I've seen some gruesome looking facial & eye injuries caused by disintegrating cutting or grinding disks, & bits of whatever somebody was cutting or grinding being flung back in the operator's face...
@@ttarp929 WHS. A slipping hand will be minus a couple of fingers & a thumb before you can say 'should have screwed the side handle back on'.
Re the guard, just do a Google Image Search for 'angle grinder accidents' if you need motivation. Also, wear proper eyepro at least - I don't think a pair of sunnies will do anything to protect you,. probably the opposite!
The guard annoys people because it can get in the way, but it will literally save your life if it is in the right place when a disk fails...
No use giving safety advice they have already said they ignore safety advice and they know better how to do things than people who have witnessed or have been hurt
Congratulations Grant. Real farming out here he says! Nice upgrade. 🙂
Your Dad is just to cool doing burnouts in shop and driveway!!!🤣😂🤣😂
Hi! Laura:
I don't mean to sound sexist at all. But the farmers of the old days wore bib coveralls. They are more functional than shorts and bare legs. My grandfather (my mother's father) was a small farmer and orchardist while I was growing up. He wore bib coveralls whenever he was out in the field. On real hot days he would disconnect the bib and let it hang from his waist.
The coverall legs would protect your legs from disk grinder fragments. And like someone else suggested, you need to wear goggles or face shield whenever using power tools known to throw particles.
My dad was born in 1910, he grew up on his family's homestead. His branch of the family had a full quarter section of the family property. I loved hearing the stories he'd tell of the days back on the farm - they did call it the Ranch. But alas, they lost the ranch during the depression, so I was never exposed greatly to that life style.
Just from what I've seen in a couple of your videos, your dad must be proud of you. I never wanted to work on a farm, and I hated the look of coveralls, I never wanted to wear them. But you make farm work look like fun. If I was younger, I might try to get a job on a farm. No. On second thought I like being retired. Ha!
Hard workers are hard to find these days, for any profession. Most young people don't know what work is. If I had a farm and needed workers, I'd sure hire you.
Keep doing a great job, and do keep the videos coming.
took me a while to find a video where Laura is yelling at the mice xD its just to funny and cute ^^ kinda like an adorable version of the "HEY BEAR" xD
wish there was a Laura vs Mice compilation :)
Way to stick with it even though it got frustrating quickly. You are doing an amazing job! Don't let anyone tell you otherwise. 😎
I am always happy when I see a new video drop. 👍🌹
Don’t be afraid of the angle grinder practice in the shop great tool to use in the field love the videos
Now you need s new Case tractor for the planter 😄😄😂
When dealing with any bolts or nuts that are exposed to weather a little heat never hurts. Carry a little propane torch along with the penetrating oil.
Yes always proper PPE (face shield, gloves, pants, ear plugs) and please get a guard on the grinder.
You should have a look for the guard and side handle of the angle grinder, makes the tool a whole less scary, and a lot safer!
While they are helpful they reduce usability in tight areas, I do like the handle for heavy work though.
You are the cutest mechanic I’ve ever seen. You always keep a good attitude and focus on the job. Your videos are wonderful to watch❤️Love you, Grammy
Laura never be afraid to ask for help with a task it is not a sign of weakness but a sign of strength the only thing that is important is that you are willing to learn how to do it the right way and the safe way remember SAFTY IS NO ACCIDENT doing a task safely is the most important thing
Said last night , 'see you in the morning' and here you are.
Never fails, a simple little job can take all day. Bummer dude!
Lol. 😀
amazing story
Thank Grant for the Big Iron auction - very interesting.
so the guard should be on the grinder. now I was back in the day the guy that when he first bought one that guard went right in the trash. until one day I had a disc blow up on me while in use. I was lucky but you should google what not having a guard can do to a person. also safety glasses. Do what you want but you don't want to live with an injury that could be prevented by safety equipment. now if this doesn't interest you ask yourself why you wear what you wear while you ride your motorcycle.
Your dad is AWESOME 👏🏻 😁😁
I don't know what this is about, I just feel I should watch it
Exactly how I choose what to watch on youtube.
OH NO! LAURA IS GOING TO OPERATE AN ANGLE GRINDER, THERE GOES SOME FINGERS! LOL
A great video Laura farms and girl you rock.
Never too old or wise to ask dad for help. 😉 You got er done! That's awesome that you found that equipment close Grant. 👍 Bummer when you have a big shipping charge dude.
Good luck Grant
Not just farming, in any business, if someone says 30 min, it is an all-day job. xD
My wife says that to me all the time when I say "it will about 30min won't take long" then it takes hours. Lol She has learned I am an optimist!
Same as in programming
What a beautiful smile and attitude.
Nice planter , heard about it on live last night and good job Laura , can’t wait to see new ATV tires sense that is what I’m all about
Una señorita mucho muy trabajadora
Put a guard on that angle grinder! And yes you should be covered up when using an angle grinder or any grinder for that matter. Also in the future always carry anti-seize with you and use that on all threads, and mating surface that will rust/corrode together.
Amen on gaurd, buy the right discs, learn at a bench.
The live stream last night was amazing
Bummer dude...LOL
There is a reason I call angle grinders " Death wheels" yes full cover up is required.
Face shield too. Doesn't feel good when the wheel disintegrates and hits you in the face.
every job site safety meeting has a photo of a dude with half a grinding wheel embedded in his face
SOOOO dangerous
Kudos to you for doing your best and trying before calling for help, keep up the great videos
Vocês tem os melhores equipamentos simplesmente fascinante.
Agricultura no Brasil vai na força dos brasileiros.
I wish when I was your age that I could move on to another project when I became frustrated with the current project.
Laura I'm with you .I can have the simplest job which l think it will take 15 min to do Nope I it becomes a project..
Your pivots are diabolical
Sorry Laura loved this one the harder jobs are the more real you seem. :0 Good job on the fix. Grant's part to me was more went with the flow. Don't mean to be harsh. Still watching these. Great job on editing.
Very nice video of you doing repair work
Like what others commented on about that angle grinder- get the safety guard back on! do not use it without the guard. always were proper safety glasses when using a cutting disk!
They are completely worthless with a guard on them. You cannot get to the work with those on plus they usually cause more accidents than they prevent. Those are the first thing that I remove.
@@joefudd not true. I use mine on a daily with the guard attached. Yes there are situations where they do get in the way, but I usually just spin it to the other side or use my sawzall.
Try CLP if you can find it it's what we used in the military on rusted parts works great