Andrew Poyser Thank you! I'm glad to hear that the videos have been helpful, I'm located in Dickerson MD you can email me at Deo@calleva.org for shop info!
i have new mass eensor and new throttle body but tacoma 2005 4 cyl 2.7 engijne stalls at idle i get po102 po113 AND PO418 WHERE is fuse in box and what is it called thank you thank you
can i buy a new harness for the mas does one end go to MAS and the other to throttle body ?? thank you for replying lots of folks dont your a good man @@KITS_Auto_and_Truck_Repair
I don’t see the two connector from the meter connected to the mass air flow Isensor only one connected I just try it and I didn’t get a read I had to connect the two wire to ground on the sensor to get 12 volt but you have have one connected and getting reading
@@KITS_Auto_and_Truck_Repair my car Corolla Altis 2001 Muffler very very smeel gasoline Because combution bad What MAF sensor fault ? Because voltmeter in idle 1.34v In video idle 0.8-0.6v Sorry very bad English
I have watched numerous videos on this subject but you make things so easy to understand, teachers need to watch your videos and learn your method.
@kensmithmail Thank you!!
You are the best teacher
Lee Leelee Thank you!
Great job buddy 👍 Cristal clear lecture on how to run a test on mass air flow sensor.well appreciated!
Lamin Bojang My Pleasure! Thanks
Okay 👍 this is what I want to know my boss because I don't understand how to test it but now I understand teacher
@user-dz4jb5rg6k I'm glad to hear that!
Great video! Concise, clear and with good audio. 👍
Matt Thank you!!
Thank you for taking the time to put these great videos to educate and teach others. I’m so appreciative of your dedication and commitment.
hawong00168 My Pleasure! I appreciate you!
thanks for the teaching it's really nice
@gracelubuulwa My Pleasure! Thanks
Well Done. Thanks for the lesson...
@erno9248 My Pleasure!
This is great Deo!!!
Thanks Brother!!
Great video. You explained it very well. Thanks.
LoveTheSun My Pleasure! Thanks
Very good video! Good job 👍
drummerplusone Thank you!
Thanks a lot my friend , great as usual .
Mohammad Al-Gebaly My Pleasure my friend!
VERY INTERESTING VIDEO. THANK YOU
@noearias2006 My Pleasure!
Terima kasih atas penjelasan nya...
Semoga sukses selalu
@ropikahdiar6744 Thanks!
Thanks so much l enjoy it
sapensa achieng My Pleasure!!
Subbed in the first 2 minutes of the explanation.
kevin breaux Thank you!!
Very good explanation sir. Thanks.
Ranjib Borah My Pleasure!!
clear and direct. Thanks you.
smvideonow My Pleasure!!
Thank u so much! I learned a lot
Marcus Darnell My Pleasure!!
My mentor, the most popular and great diagnoscien on TH-cam at moment, thank you K Diagnosis . Habib Auto
Suleman Habib Thank you!!
very educative. Thank you Regards
sesha chary My Pleasure!!
What a useful vedio from my Boss.
Aminu Abdulqadir Abubakar Thank you!
Very interesting and helpful video I'm from India
Rajan Sareen Thank you! and thanks for letting me know about where you are watching from!
I love it. Couldn't make it any easier
@luisgonzalez2024. Thank you!
Thanks sir for information
Ashif Mohammed My Pleasure!!
Very good lesson.
Bart Young Thank you!!
Love the video, but shouldn't you have coupling ac on while using the scope to check the mass air flow?
Thank you, nice video, helped me to get started with my MAF, but on 7:40 when you measured ground it was 10mV not 100mV
Mike B My Pleasure! thanks
Excellent, thank you
Graham My Pleasure!!
Bon bagaye boss I like it
Richard Jean pierre Thanks!
It's explains everything
Samuel Darko Yes!
Appreciate it
BamaTony73 My Pleasure!!
Am all in to learn...😎
john mwangi sounds good!!!
Good job my brother I just wanted to say thanks to you for your videos they help me out along could you say exactly where are you located?
Andrew Poyser Thank you! I'm glad to hear that the videos have been helpful, I'm located in Dickerson MD you can email me at Deo@calleva.org for shop info!
Thank you
Ashley Segal My Pleasure!!
How are you my technician❤🙏🏾
Christley Dacosta Very Good!
Keep up the good work bro.
Daniel James thank you!!!
Thanks for the video how about the newer cars cant do as the same as shown.
@user-jn7or4ry3p My Pleasure! Yes
Really good info here. Thanks. Do you mind if I send u an email to ask a question about my wife's car and her MAF?
Timothy Horne Sure! send me an Email and I'll see how I can Help!
@@KITS_Auto_and_Truck_Repair Thanks. Will do
Hello sir, do you do the same process with the 2010 Chrysler town country? The mass flow sensor with 2 wires.
Nazim Alsalami Yes it's pretty much the same process!!
Quality
robert beaumont Thanks!
Does the test work on bmw 1series f20 118 with fault code p0100?
@tsepangnoko1962 Yes!
Mon ami déo j'espère que tu vas bien
Dofran Kouzard je vais bien mon ami et toi?
🌷🌷🌷👍👍👍
Aymen Mohamed Thank you!
What is the deference between power brobe and multimeter?
@swift4311 a Multimeter mesures the voltage difference of 2 points but a power probe mesures voltage and can also power a circuit!
i have new mass eensor and new throttle body but tacoma 2005 4 cyl 2.7 engijne stalls at idle i get po102 po113 AND PO418 WHERE is fuse in box and what is it called thank you thank you
@jamesrooney7689 Check your Mass air floe sensor wiring!
can i buy a new harness for the mas does one end go to MAS and the other to throttle body ?? thank you for replying lots of folks dont your a good man @@KITS_Auto_and_Truck_Repair
Is good
Javier Hernandez Thanks!!
I don’t see the two connector from the meter connected to the mass air flow Isensor only one connected I just try it and I didn’t get a read I had to connect the two wire to ground on the sensor to get 12 volt but you have have one connected and getting reading
Jobs Jamaica The black test lead on the multimeter was connected to battery ground!
Is there is a Risk using multiplemert?
@swift4311 Not at all!
What is the deference between power brobe and multimeter?
Where is your shop .?
Ahmed Sayed Our Shop is in Dickerson MD, you can email at Deo@calleva.org for shop info!
my tacoma jumps up and down and stalls is that a bade sensor i cannot keep it running thank you
@jamesrooney7689 what trouble code do you have in memory?
sorry i have no metor
i just installed new MAS AND THROTTLE BODY uptill then everything was fine ????
Hallo
I'm from Indonesia
MAF sensor output in my car at idle engine 1.30v
This is not normal sir ?
Muhammad Nurul Fadli what is wrong with your car? what trouble codes do you have in memory?
@@KITS_Auto_and_Truck_Repair my car Corolla Altis 2001
Muffler very very smeel gasoline
Because combution bad
What MAF sensor fault ? Because voltmeter in idle 1.34v
In video idle 0.8-0.6v
Sorry very bad English
@@FaniTv851 Can you tell me what code you are getting?
Isn't a reading of 0.01 volts, on the ground wire, 10 millivolts not 1 millivolt?
Steve P it's 10 millivolts!
J'ai un problème avec ma 607 qui ne démarre pas , j'ai un code erreur u1000
Dofran Kouzard D'accord mon frère! envoi moi un email at Deo@calleva.org ou appele moi et je vais t'aider a trouver la solution!
Where are located to take my van to yoy
batolok garcia I'm located in Dickerson MD
WRONG
The sensor is between the air intake filter and throttle body not the intake manifold
Mark Flint Yes!
Talk less on ur vedio
Infinity Love Thanks!