A million THANK YOU's from London, England, UK!!! This is one of the best and helpful videos I've ever seen. If there was an award for helpful instruction videos, this should win it. I bought this machine and it came with instructions which you probably need a science degree to understand. This video is so simple and easy to understand. I became an expert in under 20 minutes. Thank you a million times. Thank you, thank you, thank you, thank you.....
nice vid, thank you! to my question now: *none* of this vids demonstrates a sewing job for more than ~10cm. i bought what appears to be a Chinese rip-off, but looks/works *exactly* the same. Problem is that after about half a meter it messes up and everything unwinds (i am trying to sew a blanket) and i have to go through the whole trouble of putting the thread into the 7-step process... *big bummer!* Any advice please??
Hi, I followed the same steps as yours, but the needle does not catch the bobbin thread. Mine is a brand new machine though. Please suggest what can be done. Thanks in advance.
If you can't get the bobbin thread to come up, tuck an inch of it in back of the bobbin. Drape the thread backwards as shown in the video before sliding the cover over. Then, make sure you have at least 6" of thread coming out of the needle. SLOWLY turn the wheel toward you down and all the way back up. You may not see the bobbin thread yet. Slide one side of a pair of scissors between the foot and base plate of the machine to gently and slowly pull the thread all the way back. The bobbin thread should come up. Slide the scissors under again to fully pull both threads straight out.
Hello, if you could help me, my mini doesn't stitch, both thread are too loose, the needle pierces the fabric, the two threads are there, but don't form the stitches, what should I do? Thank you so much, Ana.
The model of the sewing machine I’m using is very similar but the sewing machine is a little more hefty shaped and I guess you can say larger since I have seen that model to compare but it’s still a mini sewing machine. I can’t seem to have the bobber part string up and sew. It is already going through the hole but it’s not making any stitching and I can’t seem to find what’s wrong?
I have the same brand I just noticed that after I finish a stitch and cut the thread I have to unite the lower and upper thread again. Does it really work like that? Because if I don't the upper thread comes off
I have mine threaded properly, but it will be going along fine then the thread comes out of the needle. I can tell when it happens because the carriage will start to move faster. Is it because of too much tension on the top thread, crappy thread or just a quirk in the machine?
No, this machine can only do basic stitching. The machines that can do different patterns are usually more expensive than this one. This one is normally sold for $20 and under.
well from looking at all the comments I dont see any replies from Varmax , so shoot I think this is probably going back in the closet as one of my waisted spendings .I was hoping to do some simple mask making
your other thread needs to be long, and then, you need to turn the purple thingy towards you. if that doesn't help, you can go check out part 1 of this. to find part 1, search "varmax sewing machine part 1"
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
A million THANK YOU's from London, England, UK!!! This is one of the best and helpful videos I've ever seen. If there was an award for helpful instruction videos, this should win it. I bought this machine and it came with instructions which you probably need a science degree to understand. This video is so simple and easy to understand. I became an expert in under 20 minutes. Thank you a million times. Thank you, thank you, thank you, thank you.....
Thanks I just purchased this. This really helped. Great job explaining
Thanks for the information.needed.havent machine sewed for decades.so thanks for refresher .
You really Help me thank you
Ask ko lang kc gusto umorder how much naman po yan.hindi kaya sirain yan.tnx and godblss.
nice vid, thank you!
to my question now:
*none* of this vids demonstrates a sewing job for more than ~10cm.
i bought what appears to be a Chinese rip-off, but looks/works *exactly* the same. Problem is that after about half a meter it messes up and everything unwinds (i am trying to sew a blanket) and i have to go through the whole trouble of putting the thread into the 7-step process...
*big bummer!*
Any advice please??
Sadder Whiskeymann they make the fabric very short because they don’t want to waste fabric
My machine working, but not sewing, please what will I do, I love this machine thanks
What pre wound bobbins threads could I use for this machine? Also what size needle is used.
A
I lost the screw that holds the needle in place, any idea of where I can get a replacement?
There's one on Ebay or craigs list i think.
I keep breaking my needle
I keep breaking my n6
Thank you.. I am very new to sewing & your video is greatly appreciated! :-)
Amelie Angels ur icnjc
Buenas noches donde se consigue la tabla de la maquina gracias
Hi, I followed the same steps as yours, but the needle does not catch the bobbin thread. Mine is a brand new machine though. Please suggest what can be done. Thanks in advance.
Same here I use a cordless drill with a sharpen pencil on it and used that to load the Bobbin.
im having the same problem
Susmitha Sharma xď
ellen laing th-cam.com/video/tjz8O_P6tT4/w-d-xo.html maybe this might help u
If you can't get the bobbin thread to come up, tuck an inch of it in back of the bobbin. Drape the thread backwards as shown in the video before sliding the cover over. Then, make sure you have at least 6" of thread coming out of the needle. SLOWLY turn the wheel toward you down and all the way back up. You may not see the bobbin thread yet. Slide one side of a pair of scissors between the foot and base plate of the machine to gently and slowly pull the thread all the way back. The bobbin thread should come up. Slide the scissors under again to fully pull both threads straight out.
Hello, if you could help me, my mini doesn't stitch, both thread are too loose, the needle pierces the fabric, the two threads are there, but don't form the stitches, what should I do? Thank you so much, Ana.
The model of the sewing machine I’m using is very similar but the sewing machine is a little more hefty shaped and I guess you can say larger since I have seen that model to compare but it’s still a mini sewing machine. I can’t seem to have the bobber part string up and sew. It is already going through the hole but it’s not making any stitching and I can’t seem to find what’s wrong?
Mine too
Am from abuja Nigeria, please help me I love this machine not sewing but is work.
De ce îmi sare ata de la mașina de cusut la fel ca mașina aceasta
How can I sew it front and back
I have the same brand I just noticed that after I finish a stitch and cut the thread I have to unite the lower and upper thread again. Does it really work like that? Because if I don't the upper thread comes off
yes, well mine does!
Need charging cord it didn’t have one with it and also the tension button came off can’t get it back on
I have mine threaded properly, but it will be going along fine then the thread comes out of the needle. I can tell when it happens because the carriage will start to move faster. Is it because of too much tension on the top thread, crappy thread or just a quirk in the machine?
Not good
That bobbing thread is not coming up, what am I doing wrong. I followed everything and nothing is happening
Hi carol, i would like to suggest you contact "kpsm_service@kpe-commerce.com", it is the customer service email of Varmax. They might can help you.
Varmax Little Sewing Machine with Extension Table Review! || Step By Step Turotrial Of 2020
thanks for the info
Does this feature a zic zac pattern?
No, this machine can only do basic stitching. The machines that can do different patterns are usually more expensive than this one. This one is normally sold for $20 and under.
mini sewing machine is good product.but its not working properly thread problem plz tell me how i can use this product
well from looking at all the comments I dont see any replies from Varmax , so shoot I think this is probably going back in the closet as one of my waisted spendings .I was hoping to do some simple mask making
there are other videos! I was just a beginner, but I figured it out!
How can I sew it using a thread?
The niddle that can't catch that bobbin thread what can I do please answer me
Eta te tension kharap hoy.ki korle selai ta thik hobe ektu janaben.uporer selai thik hoy bt nicer selai thik moto hoy na
How do you sew using the thread spindle?
Replacement needles where do you get them what brand?
You can get them on Amazon and they are 90/14 organ brand
My bobbing thread not coming up on top
Same problem
Avreil Miller th-cam.com/video/tjz8O_P6tT4/w-d-xo.html maybe this might help u
Same here.
@@lilismith7227 just buy a new machine i had to
For some reasons I just can’t bring the bobbin threat (under threat) up.
your other thread needs to be long, and then, you need to turn the purple thingy towards you. if that doesn't help, you can go check out part 1 of this. to find part 1, search "varmax sewing machine part 1"
Machine is not striched what I do
you do not show how to get the winding pole out! If you could add that, it would be appreciated.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
Dear customer, we have added a video to show how to get the winding pole works. please click the th-cam.com/video/OfKf1WuO974/w-d-xo.html . Hope this can help you.
How to rethread an empty bobbin
Go to 5:58 in the video th-cam.com/video/TKJazx_KZuc/w-d-xo.html
iskam da por4m
My needle broke
بكام المكنة دى بالمصرى؟😂😂😂😂😂
Rehab Omar عندنا في السعوديه ب٥٥ريال
ليه ما اشتغلت معايا
ameera saad نفس مشكلتي
This whole things a scam! Why did I just find this exact video on 3 different channels?? No wonder I don’t get a reply on my questions
It's working, but not getting stitched properly, means getting loose stitching in some places
in tulugu Voice
not good
Its not a good machine. Its worst than a toy.
I lost the screw that holds the needle in place, any idea of where I can get a replacement?