*Can't decide what to sew?* Kick off the month on a Creative High with this adorable quick and easy mini sewing machine project! *Click the link to grab yours! ---> **mailchi.mp/5835be7275ab/video-code-103*
My thread won't be sewn through the fabric after I accidentally messed with the tension knob! Everytime I try to sew the thread is immediately pulled through. Any advice?
I’m sewing right now with my mini sewing machine as we chat but my upper thread keeps coming out of the needle tho I have adjusted the tension 😭😭. It’s frustrating me so bad Pls help me fix this
Is there a way to fix the thread tangling around the thread take up lever? I can only sew about 8 stitches max then the thread gets tangled around the lever and pops.
Could it be popping out from between the tension discs as you sew? Keep a close eye on that and check. When that happens, it gets tangled around the lever. If that's the case, sew slowly.
There is a nut on the inside of the mini sewing machine just behind the thread tension controller that must have fallen inside the sewing machine you will have to open up your sewing machine in order to get it and then screw the thread tension controller back on again I hope this helps
Saroj do you mean to say that your thread keeps breaking while sewing? the 2 biggest reasons for this are thread quality and thread tension problems. thread tension problems occur if your sewing machine is not setup and threaded properly and you have to adjust the tension properly as well. if you go into my playlist you will find videos dealing with all of these problems in the sew not scary playlist. I hope this helps.
Hi mam. Good and informative video. One week back I purchase a new Adonai mini sewing machine. Please be give a solution to my problem. That was the wound won't be ejected automatically by pressing for winding the bobbin. Now what can I do. Please let me out of this problem. Please.......please.........because all of of my stitching work is in pending.
Pamela and Jo, you must keep a long enough tail of thread after you pass it through the eye of the needle. Pass around 8 to 10 inches of thread through the eye before beginner to sew x
Alex, two layers should be fine. But if you are altering the length and sewing over multiple layers at the seam, it will be very difficult if not impossible.
can I ask how did you figure it out?? Cause I accidentally turned aroung my tension and forgot which direction was that and now my machine don't work anymore😭 please heeeelp
It's a really helpful, easy to follow video. My tension needle came off and now not getting fixed. It's just too lose and won't screw in. Can you please guide how to fix it?
Hi thanks for your query. How many layers are you trying to stitch please? This is a very small machine and will struggle with more than 2 denim layers. There is a hack for sewing thicker layers that I posted in this video: th-cam.com/video/33h1L5FVnn4/w-d-xo.html But if you are trying to hem jeans, remember that there are several layers at the seam and I doubt you will be able to sew through all of them. You will need a heavyweight sewing machine to do that. Hope this helps x
Hi Lisa, You will have to open the machine up. You will find that a hexagonal nut has fallen off inside the machine. You will need to screw this on to the other side of knob. Only then will the tension plates engage properly. Let me know how you get on. Watch how to open this machine below 👇👇👇 th-cam.com/video/_N6F1ehfJKs/w-d-xo.html
This was SO HELPFUL..I watched another video of yours too & that also made it so we could use this machine properly ( its for my granddaughter) THANKS SO MUCH
So glad I could help! I had initially bought it for my daughters too but ended up falling in love with it! Wishing you many lovely crafty moments with your granddaughter 💖
what such beautiful explanation!, I am not new with sawing machine but that is the first time l saw a so clear fantastic explanation of how to spot which side of the thread it needs to be adjusted.Excellent! Bravissima
Hi! I already watched this video and also some of your videos with regards to stitching. My problem is, I can't fix the tension knob of my mini sewing machine. I already watched your videos and followed your tips, but when I start sewing, the bottom stitch is always loose. Hope you can answer. Thank you.
@@OoniCrafts I don't know what kind of thread I was using. Can a low quality thread affects the stitching? I'm really desperate to stitch, but the bottom part is always loose.
Hi Patricia, YES low quality thread is the main culprit! Please switch to high quality branded thread. Please do watch this! 👇👇👇 th-cam.com/video/N1cXsZISszE/w-d-xo.html
Hi Stuka, It's only a little machine not designed for sewing very heavy fabric. When you hem jeans , there are at least 5 layers of denim at the seams. I don't think this machine can cope to be honest, it's just not designed to do that kind of sewing. I'll see if i can work it out. If I do, i'll definitely post a video here.
Hi, how bout if the tension is too much i mean, we recently bought it and as i was trying it out the line is just too tight, i cannot even loosen it, any advice? Thanks!
Hey please help me out I rotated my mini sewing machine's tension knob several times now its stitching, it looks like all the stitches are so in contracted form
i tried sewing it however the problem is that the top thread is almost clumping up at the bottom of the fabric, it looks nice on top however it looks messy at the bottom
Hi Denzel I'm so glad this helped you! yes please never use stretchy fabrics with the mini sewing machine, you will just be disappointed. if you do want to sew spandex , you need a sewing machine with some kind of a stretch stitch. usually these are zigzag stitches or overlock stitches as well as my favourite the triple stretch stitch. obviously the machines that have all these stitches are more expensive than the mini sewing machine i do plan to invest in one because i sold my two big sewing machines a few months ago due to lack of space. however i do miss sewing some projects which the mini sewing machine simply cannot handle. are you planning on investing in any other machine and if yes what a brand are you looking at?
Thank you for the detailed reply. I mostly use sewing for my 6 inch figurine clothing so I don't really mind manually sewing and the standard sized sewing machine probably won't do so well.
Hi Mela, thank you for your comment. I'm so sorry to hear that your machine is giving you trouble. I think it is is a timing issue. I will be opening up this machine in a future video to figure out what the problem is. Meanwhile, I would urge you to put this machine away for a few days and focus on a different hobby.
Hi Renrose, could be your upper thread tension is too high. New sewing machines come very tightly wound up, you'll have to easy and balance the tension. Follow the steps here to do this easily: th-cam.com/video/ZEky17PmJo0/w-d-xo.html
May problem rin mini sewing machine ko. Ano po kaya problem ng akin kapag pareho naman nakalabas ang mga sinulid nila pero yung sa upper, palaging bumibutaw sa karayum (needle)? Paano po i-fix ang ganon?
Hi Ooni Crafts, I just bought recently almost the same mini sewing machine, is it normal to have a smell of exhausted machine for about 20 minutes of using it?
I just found a brand new mini sewing machine at Goodwill yesterday for five dollars but the tension knob for some reason was removed and I need to figure out how to put it back together. From what I can see the two washers go on first with the little holes to put on the tab and then the spring goes over the shaft of the tension knob; is that correct?
Glad i came across this video. Thoroughly explained and demonstrated. I'll try to adjust tension hopefully i'll be able to use my mini sewing machine. Thanks
Hey I loved ur channel , I got this machine a few days back and then it worked well , however second time it was not switching I tried the scissor trick and I was able to get a stict a few but it's no getting stuck ,unable to used it ,please help
Hi Kristelle, you are supposed to use the same kind of needle as recommended by the sewing machine manufacturers. This machine definitely recommends a flat-sided needle. Are you having trouble finding these? The machine comes with two needles too.
@@OoniCrafts I am very new to sewing with a sewing machine, and just unboxed my new Brother LX3817 on Friday - it is not mini, but your lesson was still applicable, as my first seams had these tension problems you described! Was watching tutorials with someone who has a new Sunbeam SB08K - we watched several of your videos and learned a lot!!
I don’t know if you fixed It yet but It could be a timing issue with the thing that’s supposed to catch the thread inside while it’s sewing. She has a video that fixes this, i had the same issue. You have to take It apart a little to fix It but she makes It look so easy you only need a screw driver
Hi Uma, thank you for your question. I don't think you can do pico/piko with this machine. It only does a simple straight stitch. Besides, most saree fabrics are very lightweight and this machine struggles with light weight fabrics. I hope this helps.
*Can't decide what to sew?* Kick off the month on a Creative High with this adorable quick and easy mini sewing machine project! *Click the link to grab yours! ---> **mailchi.mp/5835be7275ab/video-code-103*
My thread is stucking while stitching in bobbins help me out
8 hours I have been at this mini machine and haven't gotten a single stitch out of it. I am ready to throw it in the garbage and forget I ever tried
My thread won't be sewn through the fabric after I accidentally messed with the tension knob! Everytime I try to sew the thread is immediately pulled through. Any advice?
Same!
And the thread is getting gathered near bobbin
very informative. can younalso make a vlog about why mini sewing machine becamen so slow/tough, like a machine needs oiling. thanks
Great suggestion! I've noted it down thanks x
when I am stiching the holes are there on the cloth but the thread is not going can u plz solve that problem
th-cam.com/video/_N6F1ehfJKs/w-d-xo.html
You teach so well
I’m happy I meet your videos at this early stage of my sewing journey ❤️❤️❤️❤️
Ahh thank you so much for your kind words 😊 what would you like to sew eventually? xx
Looking forward to more videos from you
I’m sewing right now with my mini sewing machine as we chat but my upper thread keeps coming out of the needle tho I have adjusted the tension 😭😭.
It’s frustrating me so bad
Pls help me fix this
Please use a high quality thread and download the mini sewing machine checklist from the description.
Is there a way to fix the thread tangling around the thread take up lever? I can only sew about 8 stitches max then the thread gets tangled around the lever and pops.
Could it be popping out from between the tension discs as you sew? Keep a close eye on that and check. When that happens, it gets tangled around the lever. If that's the case, sew slowly.
my tension holder has broke i remove it and it can't come back again huhuhu
There is a nut on the inside of the mini sewing machine just behind the thread tension controller that must have fallen inside the sewing machine
you will have to open up your sewing machine in order to get it and then screw the thread tension controller back on again
I hope this helps
Mam how can I solve the problem of broken of rope during swing
Saroj do you mean to say that your thread keeps breaking while sewing? the 2 biggest reasons for this are thread quality and thread tension problems. thread tension problems occur if your sewing machine is not setup and threaded properly and you have to adjust the tension properly as well. if you go into my playlist you will find videos dealing with all of these problems in the sew not scary playlist. I hope this helps.
Wow very nice explanation...I like it...
My machine isn't stitching at all. Both top and bottom threads come out straight ... No loops
Hi Pradeep, fix it like this: th-cam.com/video/_N6F1ehfJKs/w-d-xo.html
Annoying muzak drum-beats - unnecessary, and too loud. Where do you show how to adjust the bottom bobbin tension?
My little sister tension dial came off/out. How do I put it back together?
Hi mam. Good and informative video. One week back I purchase a new Adonai mini sewing machine. Please be give a solution to my problem. That was the wound won't be ejected automatically by pressing for winding the bobbin. Now what can I do. Please let me out of this problem. Please.......please.........because all of of my stitching work is in pending.
Hi Hari,
Do you mean to say that the bobbin winding spindle is not popping out? Have you followed the instructions to use it?
Yes ,that was not popping out.
I pressed it with finger on following instructions. But it was not comes out. What can I do?
Hari, if you can find an electric screwdriver or drill, you can wind the bobbin using it too!
Ok, I already tried it but it is not working well
I wanted to ask. Do you oil your mini sewing machine and if you do where exactly do you put the oil?
Hello, why are my stitches still loose at the bottom no matter how tight or loosely i adjust the tension disk?
Machine needle is not working properly, how to fix this problem? Please tell me
Mam, Mine machine is running but while putting fabric my machine gets stop. Please help me out.
how about when you gonna start to sew, the thread on the needle is always pulling out. what should i do?
Hi
Thanks for your comment. I will make a video about this soon, watch out! xx
Yesyes having the same problem now
Pamela and Jo, you must keep a long enough tail of thread after you pass it through the eye of the needle. Pass around 8 to 10 inches of thread through the eye before beginner to sew x
When i start to sew some how the thread keeps escaping from the needle.. i have no idea what's wrong..
It was working fine just a sec ago..really appalled right now:/
Hello please my thread keeps coming out of the tension screw, why is this happening?
I have a similar one and can’t shirr what do I do about it?
Hello there I'm struggling to use my mini sewing machine
സൂചിയിലെ നൂൽ പൊട്ടുന്നു എന്താ ചെയ്യേണ്ടത്
I have the unbranded mini sewing machine and I finally figured out how to use it I just needed to fix the tension thank you🥰
Anyone know how to reset thread tension to factory settings
Hi! Can I Ask About my Presser foot lever for its not working, I mean it does make the presser foot up but it doesnt KEEP the presser foot STAY upside
The machine is faulty. Please return it for a refund.
HELP. Can this sewing machine stitch a DENIM PANTS like Levis etc? Pls reply asap.
Alex, two layers should be fine. But if you are altering the length and sewing over multiple layers at the seam, it will be very difficult if not impossible.
wish i saw this before😭😭 i changed ghe tension in my knob and it took me three weeks to figure it out
can I ask how did you figure it out?? Cause I accidentally turned aroung my tension and forgot which direction was that and now my machine don't work anymore😭 please heeeelp
Righty tighty, lefty loosey! 👍
🤣🤣🤣🤣 I am currently on your situation..
Top thread breaks on the starting saw and how to fix it
I need help, my tension knob fell off and I need help putting it back on
I posted a video about this just yesterday 👇
th-cam.com/video/-UFz18GSACE/w-d-xo.html
It's a really helpful, easy to follow video. My tension needle came off and now not getting fixed. It's just too lose and won't screw in. Can you please guide how to fix it?
Hello, my sewing machine is not working with some of the fabrics like light denim, is there a way to fix this?
Hi
thanks for your query.
How many layers are you trying to stitch please? This is a very small machine and will struggle with more than 2 denim layers. There is a hack for sewing thicker layers that I posted in this video:
th-cam.com/video/33h1L5FVnn4/w-d-xo.html
But if you are trying to hem jeans, remember that there are several layers at the seam and I doubt you will be able to sew through all of them. You will need a heavyweight sewing machine to do that.
Hope this helps x
Needle is not moving inthis machine wt to do for that
Hi i took out the knob and now when i try to put it back it pops out and my stiching is good on top but then on the bottom its not tight
Hi Lisa,
You will have to open the machine up.
You will find that a hexagonal nut has fallen off inside the machine.
You will need to screw this on to the other side of knob. Only then will the tension plates engage properly.
Let me know how you get on.
Watch how to open this machine below 👇👇👇
th-cam.com/video/_N6F1ehfJKs/w-d-xo.html
Very helpful...thank you kindly.......new subbie
Hello! Thanks for your lovely comment. Do let me know if you would like to see any particular kind of projects x
My top thread comes out of the needle after every 4-5 stitches. This started after I changed the bobbin. Please guide what to do?
Same problem here
Paano po kpag hnd kumagat ung sinulid sa ilalim mam
5:54 Ha.....ha..did you this...wow🤪😊
V nicely explained the problem n solution. Great work.
This was SO HELPFUL..I watched another video of yours too & that also made it so we could use this machine properly ( its for my granddaughter) THANKS SO MUCH
So glad I could help! I had initially bought it for my daughters too but ended up falling in love with it! Wishing you many lovely crafty moments with your granddaughter 💖
what such beautiful explanation!, I am not new with sawing machine but that is the first time l saw a so clear fantastic explanation of how to spot which side of the thread it needs to be adjusted.Excellent! Bravissima
Thank you!! This means so much!! xx
Is it natural to have an petrolium oil type inside the machine???
Hi Jay,
Yes! If you watch this video where I show you how to open it up, you'll get a better idea
th-cam.com/video/_N6F1ehfJKs/w-d-xo.html
Hi my sewing machine is tension control springs outside so when repairs are method
Hi Suja, do you mean the tension spring is broken?
Yes mom please help me
Hi! I already watched this video and also some of your videos with regards to stitching. My problem is, I can't fix the tension knob of my mini sewing machine. I already watched your videos and followed your tips, but when I start sewing, the bottom stitch is always loose. Hope you can answer. Thank you.
Hi Patricia, thanks for reaching out.
What thread are you using?
@@OoniCrafts I don't know what kind of thread I was using. Can a low quality thread affects the stitching? I'm really desperate to stitch, but the bottom part is always loose.
I have the same problem ☹️
Hi Patricia, YES low quality thread is the main culprit! Please switch to high quality branded thread.
Please do watch this!
👇👇👇
th-cam.com/video/N1cXsZISszE/w-d-xo.html
Mabel please watch this 👇👇👇
th-cam.com/video/N1cXsZISszE/w-d-xo.html
Very helpful indeed, thank-you.
Hi, please help me. The bottom thread really broke the fabric.
Please could you send me a short video clip via Instagram DM of the problem @oonicrafts
Tamil la explain panna mutiyumma
Wonderful video. Just what I needed. Can you show how to make button holes using this mini sewing machine? Thank you
Thanks. You can't make button holes with this machine I'm afraid x
Is a thread stucked inside can cause the sewing machine not to stitch?
Oh yes absolutely! Your machine must be clear of any debris before sewing!
Can u please reply madam that my machine is perfect but on cloth stitching is not coming thread is not moving & getting wheel stuckup🤔
Hi Dhanush,
Could you possibly send me a short video clip via Instagram DM of the problem @oonicrafts thanks
@@OoniCrafts Tn'Q 4r replying but i dont have Instagram 😝 i can mail u my video if u have mail id plz. Tn'Q
Stitches create big loops i tried tightening the tension but no luck. Any advice?
Unfortunately this is a problem many users are facing. I'm trying to figure out if there is a solution. I'll post a video about this as soon as I can!
You are very good person 😘
Why no stitching whenever I sew on thick jean hem at the seam ? Any solution or trick ?
Hi Stuka,
It's only a little machine not designed for sewing very heavy fabric.
When you hem jeans , there are at least 5 layers of denim at the seams. I don't think this machine can cope to be honest, it's just not designed to do that kind of sewing.
I'll see if i can work it out. If I do, i'll definitely post a video here.
Hi, how bout if the tension is too much i mean, we recently bought it and as i was trying it out the line is just too tight, i cannot even loosen it, any advice? Thanks!
Same query ! If you have figured it out please help me out too
Same. Just bought it. Threads so tight it breaks the needle no matter what I do.
Thank you so much...
Hey please help me out I rotated my mini sewing machine's tension knob several times now its stitching, it looks like all the stitches are so in contracted form
i tried sewing it however the problem is that the top thread is almost clumping up at the bottom of the fabric, it looks nice on top however it looks messy at the bottom
Zaruche, watch this 👇
th-cam.com/video/N1cXsZISszE/w-d-xo.html
Mine too😢
Very nice tip for beginners
Ahh I see now why my spandex cloth keeps jamming my mini sewing machine lol. Felt like an absolute noob. Which I am. Thank you for the video :)
Hi Denzel
I'm so glad this helped you!
yes please never use stretchy fabrics with the mini sewing machine, you will just be disappointed.
if you do want to sew spandex , you need a sewing machine with some kind of a stretch stitch.
usually these are zigzag stitches or overlock stitches as well as my favourite the triple stretch stitch.
obviously the machines that have all these stitches are more expensive than the mini sewing machine
i do plan to invest in one because i sold my two big sewing machines a few months ago due to lack of space. however i do miss sewing some projects which the mini sewing machine simply cannot handle.
are you planning on investing in any other machine and if yes what a brand are you looking at?
Thank you for the detailed reply. I mostly use sewing for my 6 inch figurine clothing so I don't really mind manually sewing and the standard sized sewing machine probably won't do so well.
Okay why my machine doesn't sew??? It starts like sewing a lil bit and then when i end sewing and wanna do it again it doesn't want to im so sad..
Hi Monika, when you restart sewing, what happens? Is the motor running, electricity coming through?
Sorry my english is bad so.. i start sewing and nothing,its not sewing like even the thread is not idk how to explain ugh..
Hi
My machine not swinging which means both ssides stitches not coming if removing cloth stitches comes properly what to do.. Help me
Just got my little sewing machine. Problem is both tensions are off and I can't get them adjusted
CAN I USE TEX 27 3 PLY POLYSTER THREAD WITH THIS MACHINE ???
I don’t get how to fix when theres more black thread coming through on top? Can somebody help me I’m stuck 🥲
Ssssssdxx jhghgn😢
How about the lower thread did not stitch pls help
Hi Mela,
thank you for your comment.
I'm so sorry to hear that your machine is giving you trouble. I think it is is a timing issue. I will be opening up this machine in a future video to figure out what the problem is. Meanwhile, I would urge you to put this machine away for a few days and focus on a different hobby.
To late 😿😿
Hi..how cani fix my mini sewing machine the cloth press ing bar is keep on loosing..i already dis assemble my sewing machine countless times.
We have same sewing machine. My problem is that my top thread keep breaking, what should I do? :(
Renrose Bernacer i think the tension is too tight po
Alexandra Ami Ok, thank you so much 💕
Hi Renrose,
could be your upper thread tension is too high.
New sewing machines come very tightly wound up, you'll have to easy and balance the tension.
Follow the steps here to do this easily:
th-cam.com/video/ZEky17PmJo0/w-d-xo.html
Maybe I have mistakenly touch the thread adjustment and now that thread attached to the needle is always broken. Can you please help me with this?
May problem rin mini sewing machine ko. Ano po kaya problem ng akin kapag pareho naman nakalabas ang mga sinulid nila pero yung sa upper, palaging bumibutaw sa karayum (needle)? Paano po i-fix ang ganon?
Please can you write in English? I do not understand this language. Thanks.
Hi pahabain mo lang po yung thread na nakalagay sa needle ganyan lang po ginagawa ko :))
Hey should I buy this machine pls reply or should I buy basic pedal operated one like usha
It runs revrrse
Hi Ooni Crafts, I just bought recently almost the same mini sewing machine, is it normal to have a smell of exhausted machine for about 20 minutes of using it?
Hi Cris, no that doesn't sound right at all!
@@OoniCrafts oh my, not quite sure of the issue but will take an eye for that. Thank you so kuch for your the info. +sub
Cris keep the speed low and good luck! xx
I just found a brand new mini sewing machine at Goodwill yesterday for five dollars but the tension knob for some reason was removed and I need to figure out how to put it back together. From what I can see the two washers go on first with the little holes to put on the tab and then the spring goes over the shaft of the tension knob; is that correct?
Glad i came across this video. Thoroughly explained and demonstrated. I'll try to adjust tension hopefully i'll be able to use my mini sewing machine. Thanks
I'm so glad you found this useful. Do let me know how you get on! x
Hey I loved ur channel , I got this machine a few days back and then it worked well , however second time it was not switching I tried the scissor trick and I was able to get a stict a few but it's no getting stuck ,unable to used it ,please help
will it not sew if the needle i used has no flat edge?
Hi Kristelle, you are supposed to use the same kind of needle as recommended by the sewing machine manufacturers. This machine definitely recommends a flat-sided needle. Are you having trouble finding these? The machine comes with two needles too.
I saw the thumbnail
I did exactly what you said not to do and I cant fix it 🙂 Im gonna watch this video and hope it helps me
Mam can you please explain what to do if stitches are not forming just the thread is tunning
i love your videos, they are so helpful! subscribed!
Thank you so much for your kind words!
What sewing machine do you use? xx
@@OoniCrafts I am very new to sewing with a sewing machine, and just unboxed my new Brother LX3817 on Friday - it is not mini, but your lesson was still applicable, as my first seams had these tension problems you described! Was watching tutorials with someone who has a new Sunbeam SB08K - we watched several of your videos and learned a lot!!
Thanks very much 💕
I just bought a new machine just like that one and I don't know how to use so I got stuck and you help me
My machine just won't sew there's no stitch on the cloth please help
Can I sew a T-shirt with this machine? Like make the length of the shirt shorter
very informative. thanks
You're welcome :D
Do you know if I can use two needles in this portable machine? I'm thinking about buying some. ❤️
what if the bottom thread is the one breaking? this is what happens to my machine :(
I pulled and both threads broke LOL guess it's time to get better thread
Which is the correct position of tension? how many rotates should i do to get crt stitches?
Can you please tell me how many rotates should i do to my tension to get the good stitches??
Sis... Please help me... I can stitch any clothes...
it's not a sewing machine but a toy.
I’m having a problem where the Bobben is threaded correctly but when I sew the thread is just laying on top of the cloth
I don’t know if you fixed It yet but It could be a timing issue with the thing that’s supposed to catch the thread inside while it’s sewing. She has a video that fixes this, i had the same issue. You have to take It apart a little to fix It but she makes It look so easy you only need a screw driver
Hi madam can we do the sarre pikko on this motion
Hi Uma, thank you for your question. I don't think you can do pico/piko with this machine. It only does a simple straight stitch. Besides, most saree fabrics are very lightweight and this machine struggles with light weight fabrics. I hope this helps.
@@OoniCrafts Okk thank you🙏💕 madam
My bottom bobbin thread is not stitching😞
Hi
Does the bobbin thread come up when you turn the handwheel?
@@OoniCrafts yes
Ivanne please send me a short video clip via Instagram DM @oonicrafts and I'll try to help as best as possible xx
@@OoniCrafts thankyouuu I'll dm you asap
Hi I have already send da vids i hope you could help. Thank you in advance😞
Thank you, this is very helpful!
My threads keeps pulling off why
The cloth is strucked why like that
Mins is being stuck everytime i stitch
I just want to ask, why is that the needle stop from stitching? I don't know what happen but I think it is because of the tension.
Same heeeere😭