The last time I've tried this method, the digitizer adhesive looks like it is thicker than the usual and that caused the digitizer to crack again after couple days of usage, any ideas?
Yes that has been a real problem for a few years now. For whatever reason the replacement digitizers come with a slightly thicker adhesive (and glass even the home button will recess) to make it worse they are not cut out in places they should be. This makes modification of the frame necessary. So what I have to do is carefully remove the adhesive from the replacement digitizer and cut down the raised plastic areas on the frame. Then I use a good primer on the frame to improve bonding and a thinner adhesive. What you will discover is even the glass is slightly thicker, there will be a very slight edge of glass raised above the rear cover because it's too thick to recess below the rim. At least it will allow the glass to lay flat on the frame and prevent the home button from recessing. It's a pain. P.S. If your curious you can use digital calipers to measure the difference in thickness of the glass. Hope this helps.
Thank you for posting this video. I was able to replace my tablet's glass for $15 instead of having to pay $100 that our local repair shop wanted. You're a life saver!
I have the s mt377r4. Its exactly the same as the one in this video in most aspects. I watched your video a few times first before attempting to do this on my own. 3rd time I'd pause during each step. I used i tiny eyeglass screwdriver for the screws and and as a spudgy and to separate the glass from the black part a regular playing card being careful of the home button and connectors. Worked great. Replaced the glass and the black, i guess that's the digitizer with no problem in about half hour start to finish. Thanks for such a well made video john.
Thanks for this excellent video. I have a small shop where I do mostly phones and don't do enough tablets to know them all. Customer dropped off a t377p and I had no idea how it is assembled.
Thanks for the information offered in this Video, in particular about waiting to adhere the Glass until the Mid Frame was latched in place, also the testing out the Display prior to snapping it back together. I was just replacing the Battery (which was blown up like a balloon) and went unnoticed because it was in a hard case and unused for a few years. The swollen Battery had actually pushed the glass loose. Randy AKA randog311
Where do I find the piece that is attached to the green board where you connect the front glass? You are talking about it from 12:36 to 12:54. It is broken but since it is a small piece I do not know how is it call and how to fix it.
Not sure what you mean but it sounds like your talking about the connector for the digitizer, if that's broken you have a problem. Replacing that will require microsoldering and should be done by an experienced person with the proper tools. If it's just the clamp that's broken it is possible to pull one from a donor board and replace it without soldering but helps if you have a microscope or at least a magnifying glass.
Hi! I managed to pry the backing off, but I'm not entirely sure how I go about reaplcing the wifi antenna? The end of the antenna that connects to the motherboard is an odd copper color unlike the far end by the bottom which is silver. Any suggestions?
Hi, i love your video and so i went ahead replaced my lcd screen and digitizer i didnt test it before i put the cover and to my surprise both cameras arent working..." warning camera failed" what did i do wrong? Could it the cables not secured properly? Thanks
@@FixItPlanet1 Just finished installing it, unfortunately the digitizer cracked when trying to pry open the tablet so I had to order that, and then when everything was all well set and done, I'm pushing the entire enclosure together and a tiny crack comes up on top of the tablet 🙃
Thanks for the video! Question for you, do I need to remove the motherboard to replace the LCD screen? It looks like the cable will slide in and out without the need to remove the board. Or is there something else?
I'm about to replace the glass only on this exact tablet...I was wondering if you could tell me the things that are necessary to disconnect..I do not want to disconnect anything that is not absolutely necessary. Great video!
I have a 1/4 inch horizontal dead area across the short length of the screen. It about an inch from the top. Can something be cleaned or does something need replace?
Great video. One question - shortly after I completed the repair, I noticed that my GPS accuracy does not seem to be as good as it used to be, and often will have difficulty tracking my location. Is it possible I did not reattach a cable correctly? Where is the antenna for the GPS located and could it have been affected?
Digital copy of your resume in this email and let him a call and see see see see see see see see see see see see see see see see see see see see see see see see llama and see see there 😗 me at all today March 1st but me myself too but it's all there love 4 lum and your his own way there love and kisses from hi hi. . .
do i have to use a heat gun to warn up the edges of the screen before i start dig in the edges? i know with other electronics you have to so i was wondering if its the same thing with this one? or it comes right out without the heat gun?
It would have been a great help to know to warm the edges for easier removal. I ended up completely breaking the touch screen, but did have another on hand. Other than that, great video.
great job on the repair! Thanks for the video. I have a related question that I hope you can answer. I recently bought one from T-mobile so their model is the SM-T377T. After powering the Tab E, I noticed that the Recent Apps and Back keys to the left and right of the home key did not light up. from past experience with Samsung phones like the S5 etc, those keys have always illuminated when touched. Do you know if in this model, the two capacitive keys have been purposely left without illumination?
Samsung Android Factory reset is usually done with the power and volume keys, sometimes even the home button, but I'm not aware of a reset button for this model on the motherboard.
It belongs to the entry-level "E" line of the Samsung Galaxy Tab series. The "A" or or "V" etc. denotes the carrier (if any) such as AT&T, Verizon, Sprint,T-Mobile. As long as you are replacing the touchscreen by itself and not the frame or parts of the logic board then you should be good.
I noticed after i finished replacing the screen my tablet said it was charging but wasn't actually charging because it went all the way down to 1% then died and wont turn on now. Any suggestion on what i might have done wrong?
The screen assembly for starters and pry tools can be found on Ebay rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FFOR-SAMSUNG-Galaxy-Tab-E-8-0-SM-T377A-SM-T377P-T377T-T377V-LCD-TOUCH-SCREEN-PART%2F122895171270%3Fhash%3Ditem1c9d1f7ec6%3Am%3AmRg9Cjyj5aUnKuKajHKffUw%3Ark%3A3%3Apf%3A0&campid=5338414869&toolid=20008
@@FixItPlanet1 What is the name of that thing pry tool you use? Can't find anything like it. Edit: Nevermind, it's called a spudger. You can buy a set on ifixit.com for about 8 bucks + shipping!
I replaced the screen on my Samsung and when I go to turn it on it won't let me touch anything and the screen goes out I'm wondering do that means the LCD screen needs to be replaced?
Inspect cables and connectors for damage, double check connections and test again. If it still doesn't work then replace with another known good display and touchscreen then test again.
Amazing video .Much better then it was when I was in computer college, I wish people would watch this video before they decide to post their “Hackjob” videos. 5 stars to you
The last time I've tried this method, the digitizer adhesive looks like it is thicker than the usual and that caused the digitizer to crack again after couple days of usage, any ideas?
Yes that has been a real problem for a few years now. For whatever reason the replacement digitizers come with a slightly thicker adhesive (and glass even the home button will recess) to make it worse they are not cut out in places they should be. This makes modification of the frame necessary.
So what I have to do is carefully remove the adhesive from the replacement digitizer and cut down the raised plastic areas on the frame. Then I use a good primer on the frame to improve bonding and a thinner adhesive. What you will discover is even the glass is slightly thicker, there will be a very slight edge of glass raised above the rear cover because it's too thick to recess below the rim. At least it will allow the glass to lay flat on the frame and prevent the home button from recessing. It's a pain.
P.S. If your curious you can use digital calipers to measure the difference in thickness of the glass. Hope this helps.
Thank you for posting this video. I was able to replace my tablet's glass for $15 instead of having to pay $100 that our local repair shop wanted. You're a life saver!
Glad to hear it!
I have the s mt377r4. Its exactly the same as the one in this video in most aspects. I watched your video a few times first before attempting to do this on my own. 3rd time I'd pause during each step. I used i tiny eyeglass screwdriver for the screws and and as a spudgy and to separate the glass from the black part a regular playing card being careful of the home button and connectors. Worked great. Replaced the glass and the black, i guess that's the digitizer with no problem in about half hour start to finish. Thanks for such a well made video john.
That's great!
thanks for the walkthrough. I swapped out a digitizer in a tab e that had been collecting dust for about a year. Works great now.
Excellent directions! Replaced my brother's display in about an hour.
That's great thanks!
Thanks for this excellent video. I have a small shop where I do mostly phones and don't do enough tablets to know them all. Customer dropped off a t377p and I had no idea how it is assembled.
Worked awesome, no more cracked glass!
Thank you for the step by step the video was more than help
You are welcome
Thanks for the great directions
Thanks for the information offered in this Video, in particular about waiting to adhere the Glass until the Mid Frame was latched in place, also the testing out the Display prior to snapping it back together. I was just replacing the Battery (which was blown up like a balloon) and went unnoticed because it was in a hard case and unused for a few years. The swollen Battery had actually pushed the glass loose. Randy AKA randog311
Hi thank you for this video. However I have the exact of this tab sm t3777 but the backlight aren't lighting up though it powers on.
Where do I find the piece that is attached to the green board where you connect the front glass? You are talking about it from 12:36 to 12:54. It is broken but since it is a small piece I do not know how is it call and how to fix it.
Not sure what you mean but it sounds like your talking about the connector for the digitizer, if that's broken you have a problem. Replacing that will require microsoldering and should be done by an experienced person with the proper tools. If it's just the clamp that's broken it is possible to pull one from a donor board and replace it without soldering but helps if you have a microscope or at least a magnifying glass.
Thanks, very helpful.
Hi! I managed to pry the backing off, but I'm not entirely sure how I go about reaplcing the wifi antenna? The end of the antenna that connects to the motherboard is an odd copper color unlike the far end by the bottom which is silver. Any suggestions?
Thank you. I just replaced the glass and was trying to pry into that fake seam on the back
Hehe yes they like to play tricks. Thank you.
Hi, i love your video and so i went ahead replaced my lcd screen and digitizer i didnt test it before i put the cover and to my surprise both cameras arent working..." warning camera failed" what did i do wrong? Could it the cables not secured properly? Thanks
Broke the LCD on a tablet at work and tomorrow I gotta replace it. Wish me luck! Also what was used to clean the adhesive?
You can just use alcohol to clean the adhesive. Good luck!
@@FixItPlanet1 Alrighty thanks!
@@FixItPlanet1 Just finished installing it, unfortunately the digitizer cracked when trying to pry open the tablet so I had to order that, and then when everything was all well set and done, I'm pushing the entire enclosure together and a tiny crack comes up on top of the tablet 🙃
So I dont need to disconnect the mother board steps if im just replacing digitizer right?
Thanks for the video!
Question for you, do I need to remove the motherboard to replace the LCD screen? It looks like the cable will slide in and out without the need to remove the board. Or is there something else?
It's not a requirement. Just what ever works best for you ;)
I'm about to replace the glass only on this exact tablet...I was wondering if you could tell me the things that are necessary to disconnect..I do not want to disconnect anything that is not absolutely necessary. Great video!
What are names of the tools you use to pry open the tablet I would like to purchase some thank you
very helpful.
Perfect! Thanks
hi Where can I buy the diagram for that model?
I have a 1/4 inch horizontal dead area across the short length of the screen. It about an inch from the top. Can something be cleaned or does something need replace?
Most likely the digitizer (Touchscreen) needs to be replaced.
Great video. One question - shortly after I completed the repair, I noticed that my GPS accuracy does not seem to be as good as it used to be, and often will have difficulty tracking my location. Is it possible I did not reattach a cable correctly? Where is the antenna for the GPS located and could it have been affected?
Digital copy of your resume in this email and let him a call and see see see see see see see see see see see see see see see see see see see see see see see see llama and see see there 😗 me at all today March 1st but me myself too but it's all there love 4 lum and your his own way there love and kisses from hi hi. .
.
Pls how can I fix the backlight for this phone
do i have to use a heat gun to warn up the edges of the screen before i start dig in the edges? i know with other electronics you have to so i was wondering if its the same thing with this one? or it comes right out without the heat gun?
There is adhesive around the edges. Warming it makes it easier and reduces the risk of damage to the digitizer but is not required.
Will this method work with model SM-T377T?
They are similar but watch our for subtle differences.
It would have been a great help to know to warm the edges for easier removal. I ended up completely breaking the touch screen, but did have another on hand. Other than that, great video.
Yes it was put on a hot plate. Sorry I usually mention that but I guess it was overlooked in this video. Bummer :(
Still a very helpful video
My tab is sm-t378l, display damage. Sm-t377l display support that or not ?
What?
We're can I get the glue strip to seal the screen to the back what size is it
The one that was on he a lot of glass stuck in it
great job on the repair! Thanks for the video. I have a related question that I hope you can answer. I recently bought one from T-mobile so their model is the SM-T377T. After powering the Tab E, I noticed that the Recent Apps and Back keys to the left and right of the home key did not light up. from past experience with Samsung phones like the S5 etc, those keys have always illuminated when touched. Do you know if in this model, the two capacitive keys have been purposely left without illumination?
They are just white underneath on the Tab E model I did not see them light up. They are not like the phones and each model is different.
I have the same T Mobile tablet, is this repair the same for this model also?
How much do you charge for fix it for screen and charger port
What do you charge to replace screens?
so the white clamp that holds the connector for the screen broke in half will it still work if i use tape or something!?
What happened
Can I use that screen with a sm-t378v or is different
thanks a lots
is there a physical reset button on the mobo?
Samsung Android Factory reset is usually done with the power and volume keys, sometimes even the home button, but I'm not aware of a reset button for this model on the motherboard.
Hello I’m thinking to replace my sm-T377w, or they the same as Sm-T377A?
I have the V version unjust dropped a portable propane can on it.... I have to do same.... trying to decide if I do a insurance or fix it myself
It belongs to the entry-level "E" line of the Samsung Galaxy Tab series. The "A" or or "V" etc. denotes the carrier (if any) such as AT&T, Verizon, Sprint,T-Mobile.
As long as you are replacing the touchscreen by itself and not the frame or parts of the logic board then you should be good.
@@FixItPlanet1 I remembered I had assyrian insurance....
$$9 .00 and a day later blammo a brand new "tab a" thanks for quick response though
Kewl!
I noticed after i finished replacing the screen my tablet said it was charging but wasn't actually charging because it went all the way down to 1% then died and wont turn on now. Any suggestion on what i might have done wrong?
Where can I buy the lcd display
Just search ebay
Can u tell me what we need or what's needed
The screen assembly for starters and pry tools can be found on Ebay rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FFOR-SAMSUNG-Galaxy-Tab-E-8-0-SM-T377A-SM-T377P-T377T-T377V-LCD-TOUCH-SCREEN-PART%2F122895171270%3Fhash%3Ditem1c9d1f7ec6%3Am%3AmRg9Cjyj5aUnKuKajHKffUw%3Ark%3A3%3Apf%3A0&campid=5338414869&toolid=20008
@@FixItPlanet1 What is the name of that thing pry tool you use? Can't find anything like it. Edit: Nevermind, it's called a spudger. You can buy a set on ifixit.com for about 8 bucks + shipping!
Please tell me I didn't just wreck my tablet =( the part the digizter tab goes into top part broke in half
I replaced the screen on my Samsung and when I go to turn it on it won't let me touch anything and the screen goes out I'm wondering do that means the LCD screen needs to be replaced?
Inspect cables and connectors for damage, double check connections and test again. If it still doesn't work then replace with another known good display and touchscreen then test again.
@@FixItPlanet1 ok and thank you
No problem good luck!
@@FixItPlanet1 I tested it and I'm a have to replace the LCD screen and again thank you
Hey can I use sm t377A screen to repair sm t377W screen . Please reply back ASAP thanks
Amazing video .Much better then it was when I was in computer college, I wish people would watch this video before they decide to post their “Hackjob” videos. 5 stars to you
Thanks!
Came through for me
I fixed my bros tablets cuz of you
Hello brother
i can't fix my old tablet
Because I Don't Have Repair Device Systems
I can't get the back off!
The back does not come off. Watch his video.
RIP Me, swapped digi, and it cracked again after putting rear housing back on
pls go slower