You dont understand how much this has helped my fiance. He wants to say thank you these videos made his first day soooo much easier on his anxiety. Thank you so much Joe
Hi Joe! I just passed my forklift certification 2 days ago. Your videos helped me a lot. Now its time to look for a job around. Greetings from the Philippines🇵🇭
Same I just passed my forklift certification too! Now hopefully I can get hired more easily and faster I rly wanna get back on my feet again too also congrats!
I disliked because you should have kept the camera on the entire forklift especially blades from the beginning to end. The young lady did well as far as I can see. Good tutoring 👍🏾
Joe, thank you for putting out the videos and content I just started at a company that sells forklifts pallet jacks all sorts of material handling equipment and batteries and I have learned more watching your videos over the past two days then I ever could have imagined.
What’s up Joe? Mane I got asked to drive the forklift the other day at my job and I came across your vids and you have taught me a lot already! Preciate cha bro keep up the good content my guy💯💪🏾 I’m not nervous anymore lol
I like how you are very patient. The two forklift operators where I work went top speed with heavy foot traffic. Sometimes without a seat belt. I ran a electric pallet jack mover, there and was thankful I didn't get to run their forklifts. They were racing them around like it was NASCAR.
Great job, I have the basic knowledge about forklift operatoration, but I couldn't finish the training, I wish to complete the training in future when I have funds to do that.
I was a truck driver 33yrs I've retired from trucking now I load them using double forks lift got my certification card yesterday. I picked it up quick. I use to load flatbeds with water pipe dangerous you have to be on your toes with the fork tilt.
For her first time operating a forklift and Joe is a great teacher......just got to be careful to be too over confident and ALWAYS be safe to you and around others. I noticed she got better as she practiced more...but please always look behind you when you back up....especially towards the end of the video...and god bless.
it is doing quite well, on the other hand, after having unloaded, you will have to think about raising the forks a little more unless the rules are different in your country compared to those in France. The forks should be between 15 and 20 cm above the ground.
@@zakouragus My credentials- retired after over 40 years in the freight moving industry. Drove everything from 2 wheel warehouse cart to 5 axle semi with 53 foot trailer. I might get really flamed for saying this, but whether or not to change the tilt depends on several conditions. On level floors with good pallets as shown in the video there is NO NEED to change the tilt. Under these conditions merely drop forks to the floor, pull tilt back so tips of fork enter center of pallet , leave tilt at that setting until parking at end of the day. At this setting when lifting, the tips will lift first, lifting about 2 inches before the heel of the forks start to lift. That is enough tilt for normal material moving. Of course you have to keep an eye on things & make adjustments if conditions change.
I would probably leave 6 inches of space between my mast and my pallet, if I was picking something that close to a wall or a fence. Specially because those forks may stick out longer than a regular ECL pallet. But she gets credit because the electric forklift handles a little different than the propane or diesel. Lol
😂😂😂 To be honest I backed into a pole last week it scared the hell out of me. And I’m 12+ years the girl in this video was super nervous but now she’s off loading trucks.
Salut monsieur comment ça va,je voulais faire cet métier, mais malgré je n'ai pas de moyens pour payer ma formation est ce que vous pouvez m'aider je suis en Espagne
You sure this was her first time? Sheesh, to master reversing on first go is crazy. 3 wheeled forklifts are usually confusing af to begin with, getting used to the front being the pivot point and the rear being the wheel to actually do the maneuvering.
you did a great job early in the video talking to the looking backwards but then you let her back up without looking several times. If you watch again she gets worse and worse about looking when backing as the video goes on. That is an indicator that she might not no the importance of that point. correct that early. She is extremely good with the controls for a first timer!!! But knowing what the controls do is the easiest part. Knowing what you are doing and why is much harder.
joe you clearly aint a good intructor there is no all round observations when moving off an she does not hold steering wheel assistor at all and her direction of travel is sub standerd im an ittsar flt instructor in the uk id would fail her with in first 3 stages of her test.
You dont understand how much this has helped my fiance. He wants to say thank you these videos made his first day soooo much easier on his anxiety. Thank you so much Joe
Hi Joe! I just passed my forklift certification 2 days ago. Your videos helped me a lot. Now its time to look for a job around. Greetings from the Philippines🇵🇭
Congratulations
Same I just passed my forklift certification too! Now hopefully I can get hired more easily and faster I rly wanna get back on my feet again too also congrats!
Can you give me her number? Please
@@forkliftjoe3620. Are I can take a class with you. where are you located
@@forkliftjoe3620 please I can take a class with you. where are you located
I remember my first time on one. And Joe watching your videos when I was first learning had truly helped me.
Glad too hear that love
I disliked because you should have kept the camera on the entire forklift especially blades from the beginning to end. The young lady did well as far as I can see. Good tutoring 👍🏾
Joe, thank you for putting out the videos and content I just started at a company that sells forklifts pallet jacks all sorts of material handling equipment and batteries and I have learned more watching your videos over the past two days then I ever could have imagined.
Glad to help!
What’s up Joe? Mane I got asked to drive the forklift the other day at my job and I came across your vids and you have taught me a lot already! Preciate cha bro keep up the good content my guy💯💪🏾 I’m not nervous anymore lol
I’m living for this video!! I am considering getting certified to operate a forklift. This video is great she did an amazing job ❤
Among all the videos I’ve watched this is the best so far, your patience is top notch.
Thanks 💯
I teach about 20 student's a week. She did really good. I wish all my students this good.
She actually watched my video before I even met her it was kinda surreal moment when she can up to me and ask do I make videos🤣
I’m learning how to operate forks as new trainee,your videos are helping me out on new tricks. Thanks bro ❤from Ghana.
Super wholesome and really good job for a first-time operator 😊 much love!
Go queen! You did awesome!!!
I hope she knows that you gotta tilt the load up so that the truck is stable on its wheels. I watched an osha video about that.
She does now it was her first time
@@forkliftjoe3620greetings from the DPRK
I like how you are very patient. The two forklift operators where I work went top speed with heavy foot traffic. Sometimes without a seat belt. I ran a electric pallet jack mover, there and was thankful I didn't get to run their forklifts. They were racing them around like it was NASCAR.
I've been watching your videos all evening 😅 Thanks you so much ❤️🙏🏽
These videos help out alot now i drive a forklift its my first time doing it but i got hand of it the second day
God bless you bro. Am a fan from Nigeria 🇳🇬 ur illustration are awesome 👌.
Very informative and you did a wonderful job explaining everything. I’ve been thinking about forklift training for awhile 😊
I start training on Monday 4-24-23
Look at my sista 💪🏾💪🏾💪🏾
Thank you sista ❤
Very good , only thing didn't apply tilt
Omg...look at my big baby...you got this...😊
Thank you ma ❤
YOU SHOULD BE A INSTRUCTOR AT A CITY COLLEGE MAN OR SOMETHING SO CALM CLEAR INSTRUCTIONS AMAZING THANK YOU
Had training today it went real good thanks for the tips I was kind of nervous and we also drive hysters
She did good
Hi Joe how to make sure your forks are vertical and center angled, m really struggling on that part
Great job, I have the basic knowledge about forklift operatoration, but I couldn't finish the training, I wish to complete the training in future when I have funds to do that.
Thank you 🥰
today I will have my first assessment with forklift wish me luck!!! Thank you for the great videos!!!
Much love supporting women ❤ im up next ✅✅
I love this work, how much do they give by the hour?
17-$32
@@forkliftjoe3620 Any license that can be obtained for this work
and you are in any state
where is park on the forklift
I hope I do as well as this lady just did, the first time I try it.
You will just trust the process she’s great now better than alot of guys I know
I was a truck driver 33yrs I've retired from trucking now I load them using double forks lift got my certification card yesterday.
I picked it up quick. I use to load flatbeds with water pipe dangerous you have to be on your toes with the fork tilt.
Hey Joe
How long does it take to get comfortable with the forklift and know what your doing at a decent pase
Do you back tilt when driving only or when taking stuff down also?
For her first time operating a forklift and Joe is a great teacher......just got to be careful to be too over confident and ALWAYS be safe to you and around others. I noticed she got better as she practiced more...but please always look behind you when you back up....especially towards the end of the video...and god bless.
Great job gurly...❤❤
Thank you 🥰
@Lashawn Yes Very Great Job 👏🏾
Thank you 😁
Well done lady
it is doing quite well, on the other hand, after having unloaded, you will have to think about raising the forks a little more unless the rules are different in your country compared to those in France. The forks should be between 15 and 20 cm above the ground.
Merci frérot malgré je comprends peut anglais mais la vidéo m’a beaucoup aidé que Dieu vous récompense 😊🙏🏾
Thanks brotha. 💚💚💚
Amazing
Hi sir, how are you? I hope you are well. I wanted to do this job but I don't have the means to pay for my training. Can you help me? I'm in Spain?
Mr joe may God bless you for doing a great job I appreciate all your efforts okay
your videos are very good 👍
I live in Lawrenceville Ga,please can someone send me a location where i can enroll for forklift training?
Try getting a forklift job most teach you in they’re own warehouse
@@forkliftjoe3620 ok
@@forkliftjoe3620 please if you are one,can you teach someone?
great video, question so when you pick up your pallet do ever want to tilt it back or just leave it straight she is doing amazing by the way?
You tilt the pallet to the direction of the machine, to secure the cargo
@@zakouragus My credentials- retired after over 40 years in the freight moving industry. Drove everything from 2 wheel warehouse cart to 5 axle semi with 53 foot trailer.
I might get really flamed for saying this, but whether or not to change the tilt depends on several conditions. On level floors with good pallets as shown in the video there is NO NEED to change the tilt. Under these conditions merely drop forks to the floor, pull tilt back so tips of fork enter center of pallet , leave tilt at that setting until parking at end of the day. At this setting when lifting, the tips will lift first, lifting about 2 inches before the heel of the forks start to lift. That is enough tilt for normal material moving.
Of course you have to keep an eye on things & make adjustments if conditions change.
Awesome! Did you take the test for cert? Was it hard? Im planning on my training at a school soon.
Where is the course ,and what is the price please?
Illinois atlas / Toyota tell them I sent you
You can give me the address please?
Good video thank you for sharing
Guud lawd she right right😋❤ where this filmed at😂😂😂
😂😂😂💯
awesome stuff 😎👍
Good job bro
I would probably leave 6 inches of space between my mast and my pallet, if I was picking something that close to a wall or a fence. Specially because those forks may stick out longer than a regular ECL pallet. But she gets credit because the electric forklift handles a little different than the propane or diesel. Lol
I take mines this week
Forkift Joe, whereabouts are you? We may send some people to you for training
I’m located in near Chicago. I can come to you if needed
@@forkliftjoe3620 I'm in Vancouver Canada! C'mon up! LOL....are you making forklift training your full-time business now?
Hello Teach
Please I need Training practice Diver Forklift
Am in lawrenceville,where can i go for forklift training?
i had a woman in my forklift certification course and she ran straight into a shelf.
😂😂😂 To be honest I backed into a pole last week it scared the hell out of me. And I’m 12+ years the girl in this video was super nervous but now she’s off loading trucks.
Please how long dose it take for someone to learn forklift
How it works 1 day, but to drive you never stop learning you just get better day by day.
She's smart and beautiful ❤
Have be having problems with my forklift it keep going off when am driving
Thank youuuuu
Salut monsieur comment ça va,je voulais faire cet métier, mais malgré je n'ai pas de moyens pour payer ma formation est ce que vous pouvez m'aider je suis en Espagne
Best 🙏🔥🔥🔥🔥🔥
Keep it up girl
Hi Joe job well done
instant pedestrian casualty didn't look behind her when reversing and lift load too high
You sure this was her first time? Sheesh, to master reversing on first go is crazy. 3 wheeled forklifts are usually confusing af to begin with, getting used to the front being the pivot point and the rear being the wheel to actually do the maneuvering.
Yes I was sure lol trust me but know she’s a pro she actually was a pro 1 month later.
Key take away he was calm
A want to learn how to operate the forklift bro's
Watch my videos I got u 💯💯
❤ thanks so much for your help please help me more
Hi bro i want steel pallets tricks pls
To be honest, she shouldn't hold the steerwheel like that and use the knob to steer.
Please were do you leave I like to be in your class
I bet after 2 weeks she was riding it like a professional around the warehouse
Yes Sir
Did not see her mirror adjustments, checking if all signals or lights are working properly and she has no hard hat.
Hard hat bro this not a bulldozer😂😂😂
Sure you did the checklist 😅
you did a great job early in the video talking to the looking backwards but then you let her back up without looking several times. If you watch again she gets worse and worse about looking when backing as the video goes on. That is an indicator that she might not no the importance of that point. correct that early.
She is extremely good with the controls for a first timer!!!
But knowing what the controls do is the easiest part.
Knowing what you are doing and why is much harder.
❣️🎉🎉🎉🎉🎉♥️💯💥💯
u da muhfukn man joe 🎉
Worst thing on a forklift is usually the seatbelt
I have been license
Always blow when u back up
Just keep the horn down all the time.
😍
Guess she didn't require a hi-vis!
Her hair should be tied back as that is a major safety risk and could get caught up.
🫡
Oh no. Watch out. Woman driving
joe you clearly aint a good intructor there is no all round observations when moving off an she does not hold steering wheel assistor at all and her direction of travel is sub standerd im an ittsar flt instructor in the uk id would fail her with in first 3 stages of her test.
Ah yes I recall using a lumber forklift for unloading a trailer because the one for the trailer broke down. lol
I’m learning how to operate forks as new trainee,your videos are helping me out on new tricks. Thanks bro ❤from Ghana.
I want to learn it too but where do I find one here in Ghana 🇬🇭