This was good! It sounds FANTASTIC! New rear end, new engine and transmission, and all freshened up! New tubs now too! (2nd channel action) It's a great driver now for years to come!!!
@@jgott1745 Was thinking that as well since he is driving it all the time fuel injection would be nice and the ethanol gas wouldn't gum it up like it does a carb
Watching this now, I tell ya what, if it wasn't for you, mortske, vgg, pole barn garage and junk yard digs and college football on Saturdays I wouldn't even have a TV. Absolutely love watching you guys, the only thing would make it better is if there was an episode everyday. Keep on giving us great content.
I dont know about anyone else but I like it when channels actually video when they go get parts and stuff, makes me feel like your on the adventure with them instead of feeling like your just stuck in the shop the whole time. Just wondering if anyone else enjoys it. Not saying he doesn't video when he goes places but alot of channels don't.
It stresses me out actually. It’s relatable to have to do it but it’s 100 percent my least favorite part. The commuting feels like so much wasted time.
Same everyone. I don't have cable or satellite. Just the internet. First car show I watched was vgg. Then came puddin . You are awsome and the boys together. It's great content. 👍 God I hope none ov you leave TH-cam. It's nice that you guys all no each other. Family!
@@PuddinsFabShop Thats just the way your mind works i think, youre a worker and a thinker so anytime you have to do something that seems like a waste of time, its because it isnt a task that makes you use your mind so it seems like its wasted time. I bet when youre doing small projects at the shop, your mind is in fast forward and youre constantly thinking about what or how youre going to be doing the next project before you even start it.
As soon as I'm done watching Mortske pay you and Slick that $8,000 a piece for the fabrication and shop rental, I'll be tuning in...hold your horses! 😂
That's square body came out amazing and you did a great job modifying the cross member Randy is very lucky to have great friends where you are keep it up
Holy almost 2h30 video! I almost fell asleep halfway and had to go back! Not that this is your fault, but it is a big time commitment to watch all of this
Your videos have been part of my ritual for years, but my girlfriend has now found interest in all the things you teach the audience and she loves the wild stuff that comes out of your mouth.
Go to Home Depot, or Lowe's and get yourself some of those plastic concrete mixing tubs. They're just big square thick plastic tubs and the work great for catch pans when working on your vehicles.
that motor looks sweet with silver and the varying colours of black :D , great content as usual and Theo needs a permanent house! and small box truck would suffice :P
I'll put this comment in a few videos to make sure you get it. Best drain pan every is a small kiddie pool, because every time water will run along the frame an miss your little pan. Everytime 😊. Thanks for sharing,hi Theo😊.
Should always install the balancer before you tighten down the timing chain cover. It centers the nose of the balancer to the seal to prevent leaks. Love the videos!
I just want to say thanks to you puddin, what you do is amazing. I had a project at one point but having some financial issues and 2 beautiful babies to take care of I had to do the hard choice and sell it. Seeing you do what you do keeps me inspired to not give up on my dreams so from the bottom of my heart I say Thank You
Good on you for helping out your friend. We humans are so vain, but you have the ideal focus of giving back and doing right by your fellow man. Good on you PUDDIN.
To prevent making a mess there are 2 must haves for a shop. A large Flat metal pan you can get from the parts house. Put some pig mat or even stay dry on it and then place your drain pan so if you miss one the other will catch it. The second is for rebuilding an engine and it is a plastic drip pan for the engine stand. I purchased mine from Jegs but probably amazon and some others have it as well.
Hey babe puddin posted another movie! Dont wait up for me got to finish watching my movie before bed. I love your videos and its just amazing how you drop movies all the time every now and then we got some shorties but i love my weekly puddin movies.
Been watching for a long time, last December I bought my first project. 93 s10. This past weekend I pulled the motor and tore it down. My first time pulling a motor. I’m having a blast! Puddin, you inspired me to go out and chase my dream… to get off my ass and go start a project!😂 Your videos have really made a positive impact on my life. Thanks for being you!
Had 4 cocktails, shucked and cooked 4 ears corn, put the butterbeans on and threw the piggy in the cast iron..... made some gravy and hushpuppies...... got my 7UP and a nice plate watchin some Dude from Oklahoma that sounds like he would fit in just fine here in WNC.
I paint my engines black as well, Ive never used engine paint ever, just krylon gloss black or brush on gloss black Rust-Oleum paint, always held up good
Yeeees sir!!! Well done Puddin!! I can definitely tell you I waited 30+ years to have a shop I can work out of and having a good friend come over and help is definitely the best motivation pill for me!!💪🏼🔥🔥🔥🤣
Just got done watchin Mortske and now it's Puddin' Time!! C10 action Yes Sir!! C'Mon! Hope one day to be so blessed by our TH-cam gearhead family as you. You earned it sir. Hard workin' Puddin Tang! Keep it up man.
Dang puddin needs a prenup for his givaways otherwise he ends up doing work to the moon and back. Great work Puddin, I know your a good man but i'd think about Terms and Conditions
Glad to hear the car is going faster, but sorry to hear you are still working some bugs out! Must be nice to have your wife in your pit crew. You're almost there Steve!👍🎯
Good morning from Cape Cod ⛵ regardless of what you're working on I've found that it's always informative and highly entertaining. It was good to see Randy there helping out and showing you about rear ends, I could tell he was real happy when he put that truck in reverse and backed out. Thanks for all your hard work an awesome content ✌️🇺🇲
Put those bearing races in the freezer for a few hours and they’ll drop right in. Also heat the bearing for the carrier and pinion. Great stuff either way! 1:59:39
The long videos are the best thing since slice bread puddin! Alway putting in the work to get the videos out on time 👌🏾 killer work as always puddin! 🤙🏾🇦🇺
I always leave the manifolds on the motor when pulling. I noticed your hook was in the wrong place on the carb plate. I typically use the front hole so you get more angle. My neighbor always removes his radiator support and brings his out the front. Seems to work really good for him. Good job
This was good! It sounds FANTASTIC! New rear end, new engine and transmission, and all freshened up! New tubs now too! (2nd channel action) It's a great driver now for years to come!!!
He told me driving it this last week has been great!
@@PuddinsFabShopthat truck will last another 40+ years ❤!!
Another great video, Thanks.
A Sniper EFI would take it to the next level!!
@@jgott1745 Was thinking that as well since he is driving it all the time fuel injection would be nice and the ethanol gas wouldn't gum it up like it does a carb
I agree with everyone else, we need a T-shirt with Theo on it! 😁👍
Not a t shirt with Theo but a shirt for Theo. Maybe mamma didn’t raise no punk or something. My dog would wear that shirt everyday
Theo for mayor, Puddin for Govenor sounds good to me, being its election year and all.
Watching this now, I tell ya what, if it wasn't for you, mortske, vgg, pole barn garage and junk yard digs and college football on Saturdays I wouldn't even have a TV. Absolutely love watching you guys, the only thing would make it better is if there was an episode everyday. Keep on giving us great content.
Thanks for watching!
Great Comment! Cars and Football!
Love college football!!!
i totaly agree with you
Forgot sleeperdude lol
The best part about this channel is that he maintains the feeling that it is just some guy doing what he wants. When he wants.
"never meanin no harm".
Also, Theo.
Dukes of Hazzard huh.
I dont know about anyone else but I like it when channels actually video when they go get parts and stuff, makes me feel like your on the adventure with them instead of feeling like your just stuck in the shop the whole time. Just wondering if anyone else enjoys it. Not saying he doesn't video when he goes places but alot of channels don't.
It stresses me out actually. It’s relatable to have to do it but it’s 100 percent my least favorite part. The commuting feels like so much wasted time.
Same everyone. I don't have cable or satellite. Just the internet. First car show I watched was vgg. Then came puddin . You are awsome and the boys together. It's great content. 👍 God I hope none ov you leave TH-cam. It's nice that you guys all no each other. Family!
I started in that same order lol
@@PuddinsFabShop Thats just the way your mind works i think, youre a worker and a thinker so anytime you have to do something that seems like a waste of time, its because it isnt a task that makes you use your mind so it seems like its wasted time. I bet when youre doing small projects at the shop, your mind is in fast forward and youre constantly thinking about what or how youre going to be doing the next project before you even start it.
I like when they get the wrong parts super relatable
As soon as I'm done watching Mortske pay you and Slick that $8,000 a piece for the fabrication and shop rental, I'll be tuning in...hold your horses! 😂
😂😂
Love that Theo has a great life. Keep spoiling him, he desreves it for being at work everyday
Tech tip take the outside ring of the bad balancer off and use it for the hydraulic press for pressing axle bearings on and off . Works great .
Kinda hard to get my project done when it takes me over 2 hours to watch your projects!!! Hahaha love it
Just finished Mortske at Puddin's, and now it's time for Puddin at Puddin's 👍
Appreciate ya watching!
It's awesome you took in the stray dog Theo. I'm on my 3rd cat I just took in but I need to raise funds to nueder and have all shots.😊
You need to put good ole Bill on a tshirt lol
We want a Theo shirt and sticker!
I like it when the engine color matches the body color.
That motor would have looked great olive green!👍
I'm amazed you do all this without an engine leveler. Black engine looks slick!
Maybe one day I’ll get one. It would sure make things easier!
There's an angle finder app for on your smartphone. I used it to mount an oldskool pendulum clock to the wall.
My engine leveler is built into my wrecker which is also my engine hoist since its boom is a twin winch line and fully hydraulic boom
@@PuddinsFabShop It absolutely is worth every penny you spend on it. It makes it easy for one guy to stab an engine!
I just came in and took a shower from swapping a Hemi, I started Mortski's video of the coupe but I had to stop it to watch this. 😂😂😂
I hope the paint fumes and brake clean don't bother Theo much! Best shop manager ever!
I always learn something when I watch a Puddin' video. Today, I learned to never get into the back end of my truck.
Duff and Theo. Two very good dogs.
YES! it's Puddin time
That's square body came out amazing and you did a great job modifying the cross member Randy is very lucky to have great friends where you are keep it up
You folks are amazing with what you do can not wait for my new stickers to arrive this week
GM is the most versatile engine swap vehicle out there
Holy almost 2h30 video!
I almost fell asleep halfway and had to go back! Not that this is your fault, but it is a big time commitment to watch all of this
I hear ya! I didn’t wanna break this all up. Just one and done!
@@PuddinsFabShop I get it. Nothing but love my dude ❤
I love the long videos
break it up, like a mini series!
Getting it DUN...
Your videos have been part of my ritual for years, but my girlfriend has now found interest in all the things you teach the audience and she loves the wild stuff that comes out of your mouth.
We want a shirt design with your new shop hand Theo on it!
You got a good buddy in Mortski- he always hooks you up with tools and stuff you don’t have.
Go to Home Depot, or Lowe's and get yourself some of those plastic concrete mixing tubs. They're just big square thick plastic tubs and the work great for catch pans when working on your vehicles.
Hot Damn!!! It's Puddin's Fab Shop Monday!!!!
Randy!! Yall are lucky to have good friends like each other. A true bless in life
I want to say thank you very much for the stickers I ordered just arrived ten minutes ago I am thrilled to have a part of puddin fab 😊😊😊😊
that motor looks sweet with silver and the varying colours of black :D , great content as usual and Theo needs a permanent house! and small box truck would suffice :P
I'll put this comment in a few videos to make sure you get it. Best drain pan every is a small kiddie pool, because every time water will run along the frame an miss your little pan. Everytime 😊. Thanks for sharing,hi Theo😊.
Should always install the balancer before you tighten down the timing chain cover. It centers the nose of the balancer to the seal to prevent leaks. Love the videos!
😂😂😂ok
He's did a bunch of motor swaps and all of them still run good so I'm sure he ain't worried
The small block chevy has dowels that locate the timing cover. Now a LS yeah but not the sbc
Spotted that straight away but overall good work... love watching 😊
@@allenwilliams87 unless some genius has removed the dowels yep ran into that twice myself fun fun fun
I just want to say thanks to you puddin, what you do is amazing. I had a project at one point but having some financial issues and 2 beautiful babies to take care of I had to do the hard choice and sell it. Seeing you do what you do keeps me inspired to not give up on my dreams so from the bottom of my heart I say Thank You
HOT DAMM 2-hour and 27-Minutes of Puddin Fab Time!!
1:30:50 = The money shot. 😊
I think ol’ Theo realizes that he finally hit pay dirt with his new family and forever home. 😊
Randy is a lucku guy to have a great friend like you!
I’m lucky to have a friend like him!
Need to change Puddins name to "Butter" because he's on a roll!!
You have a beautiful truck, Randy. Judging how much time, effort, and love the Wild Man put into it, you must be one hell of a guy!
Good on you for helping out your friend. We humans are so vain, but you have the ideal focus of giving back and doing right by your fellow man. Good on you PUDDIN.
What’s cool is Theo never messes with the fluids.
My dogs never do either. Mine all turn there nose to antifreeze also .
To prevent making a mess there are 2 must haves for a shop. A large Flat metal pan you can get from the parts house. Put some pig mat or even stay dry on it and then place your drain pan so if you miss one the other will catch it. The second is for rebuilding an engine and it is a plastic drip pan for the engine stand. I purchased mine from Jegs but probably amazon and some others have it as well.
Those big pans they make that fit with the engine stand are a life changer.
Tis only semi-gloss paint Puddin, tis simply glowin w joy over the attention you're givin it!
I'm sure Randy is quite appreciative of a friend like puddin'. Always there to help out a friend.
This truck is absolutely awesome. It's probably a way nicer driver with the overdrive transmission and new rear gears. Great work!
Hey babe puddin posted another movie! Dont wait up for me got to finish watching my movie before bed. I love your videos and its just amazing how you drop movies all the time every now and then we got some shorties but i love my weekly puddin movies.
Man that’s been Randy’s truck so long I forgot it was the free truck that came with the place. Wild.
Another good one ship shaping Randy's rig.
Nice to see him pitching in. 🙂
I can't wait to see that toyata build Mortske brought !
Really neat to see "Theo" always hanging with you ..
Mortske and puddin videos today cant get any better than that
Puddin’: Love the hot rod. Loved watching its content too. No hood, no caps for me! But you do you; I mean it’s yours after all!
She looks great! What a great rig. Randy is a lucky guy to have a buddy like you.
Been watching for a long time, last December I bought my first project. 93 s10. This past weekend I pulled the motor and tore it down. My first time pulling a motor. I’m having a blast! Puddin, you inspired me to go out and chase my dream… to get off my ass and go start a project!😂 Your videos have really made a positive impact on my life. Thanks for being you!
Dude, the Model A vids were great. Sweet ride too!!!
Who doesn't love themselves a good box??? Was really hoping for the Theo shirts.
brother you could use a good sandblaster. also washers under those carter keys on the shifter linkages would help. great episode.
Love watching your channel. You are probably on my TV more than anything else.
Had 4 cocktails, shucked and cooked 4 ears corn, put the butterbeans on and threw the piggy in the cast iron..... made some gravy and hushpuppies...... got my 7UP and a nice plate watchin some Dude from Oklahoma that sounds like he would fit in just fine here in WNC.
Amazing! you managed all this w no Mortske!
That 350 looks so good setting in there. Almost resembles an LS with those black valve covers. Excellent Mr. P. Forget about it ❤.
Thank you!
Dang it it’s Puddin AND Mortske Monday again!! 5 hours of total content?! It’s gonna take all week to take it all in!!!
Theo is soo chill, impact wrenching spilling coolant! No worries
You did a fair amount of work on this one! 👍👍👍👍👍
It’s nice to see some engine fabrication from the ole puddins fab shop love it
I paint my engines black as well, Ive never used engine paint ever, just krylon gloss black or brush on gloss black Rust-Oleum paint, always held up good
You're the classic dad who didnt want a dog, but cant live without one now.
I’ve been watching you since you couldn’t afford brake cleaner. Congratulations on doing well.
love the gmc. love Mortske's dually project. love the wagon. couldn't care less about the model A.
Yeeees sir!!! Well done Puddin!!
I can definitely tell you I waited 30+ years to have a shop I can work out of and having a good friend come over and help is definitely the best motivation pill for me!!💪🏼🔥🔥🔥🤣
I finally got around to ordering some Tshirts and stickers. I've definitely gotten my money's worth over the years so I did a custom tip as well.
Well we appreciate it!
24:42 I bought a needle scaler at harbor freight. Well worth the 30 bucks. It makes short work out of engine block prep for paint
Great way to spend the last day of my vacation before I go back to work tomorrow !!!! Thanks Puddin' !!!!
Just got done watchin Mortske and now it's Puddin' Time!! C10 action Yes Sir!! C'Mon! Hope one day to be so blessed by our TH-cam gearhead family as you. You earned it sir. Hard workin' Puddin Tang! Keep it up man.
Puddin is a one man working mo-chine..😅
Just ordered 2 model A shirts. One Fer the shop, one Fer stepping out.
Stick ya a truck tire or two under them engines when setting them on the ground. It helps keep them from flopping over or sliding around.
Dang puddin needs a prenup for his givaways otherwise he ends up doing work to the moon and back. Great work Puddin, I know your a good man but i'd think about Terms and Conditions
Glad to hear the car is going faster, but sorry to hear you are still working some bugs out! Must be nice to have your wife in your pit crew. You're almost there Steve!👍🎯
Good morning from Cape Cod ⛵ regardless of what you're working on I've found that it's always informative and highly entertaining. It was good to see Randy there helping out and showing you about rear ends, I could tell he was real happy when he put that truck in reverse and backed out. Thanks for all your hard work an awesome content ✌️🇺🇲
Put those bearing races in the freezer for a few hours and they’ll drop right in. Also heat the bearing for the carrier and pinion. Great stuff either way! 1:59:39
Y’all made a cool truck even better
I agree put some headers and true duals on that puppy letter howl at the Moon
The long videos are the best thing since slice bread puddin! Alway putting in the work to get the videos out on time 👌🏾 killer work as always puddin! 🤙🏾🇦🇺
I love the model A!!!!!!! The shirt is awesome
Hey puddin we need a Theo shirt maybe a sticker
I always leave the manifolds on the motor when pulling. I noticed your hook was in the wrong place on the carb plate. I typically use the front hole so you get more angle. My neighbor always removes his radiator support and brings his out the front. Seems to work really good for him. Good job
I laughed at the “square body” joke.
Great job helping OL’ Morty and Texas rat rod!
Zinc Chromate works great on aluminum. Not into black motors but still fun to watch. Thanks for the entertainment
Love the look f this truck!
From where you started with it, to where it is now... night and day!
a favorite project you have done. super cool to see it again!!
I’m really here just to see Theo……
Theo is building the next addition.
@@whoru2judge476 Corrugated Construction Co. AKC 🐶
All the rearends I rebuilt like that we just reuse the existing pinion shim and crush sleeve, never had one fail or make noise.
When I work on stuff I never have full weekend or a full day, but I always say an hour a day makes the jackstands go away
Watched the entire build! She sure is pretty! Great job!!
Really like the black and chrome engine. Came out awesome! Love that truck :)
Love that truck. What a great transformation.
Thanks Puddin! Glad to see the ol' pickup again! Some great work there!! Lookin' forward to that ol' Model A shirt showing up in my mailbox!!
Second on the black paint....always my go to on engines. Love the channel!