I've worked on quite few laptops and desktops, and I watch youtube for tut's on what ever model i'm working on. I think this is by far the most detailed one i've seen yet. WOW.. That was a very impressive tutorial ! I would like to suggest when you removed the processor, you should have mentioned the gold triangle location. I'm sure you will on your tut where you put it back together, if there is one. Nice video.
Robert, Thanks so much, I just love to fix computers and your video was very helpful. Now I'm about to try to put this laptop back together, wish me luck. cj
I wish I had seen this years ago but I know that the bios was corrupt however HP does not now offer the bios for this 1215sa dv6 model so zi am unable to download this to a usb flash drive
I only need to my keyboard its not working right. do i have to do all that i dont wanna pull out cards and stuff. Want to get it to flip out like you did to possibly clean keys are messed up an screwing up my online keyboard too
ya I think so its causing start up and mouse errors from stuck keys.I should of left it alone making it worse. Is the single screw important too because it was broken?
Is this laptop compatible with the amd a10-5750m? I've found a similar laptop on ebay and I have an a10-5750m from an older laptop that broke so I was wondering if it would work.
There is a version of that machine that tends to overheat the graphic chip, the solder balls under it become disconnected, much like the xbox i think, im not into game consoles so dont quote me lol. if its the graphics chip then it will need to be removed with a reflow station and the board cleaned and mask solder depositing on the pcb before the chip is reflowed. I hope it is the cpu though, laptops can be a pain to repair at times :-( Laptops are a good source of spare screws lol, why fit just 6 pcb hold down screws when the manufacture went mad with 20, silly arses lol :)
Man how do you remember which screws go where and what stuff goes where? Laptops seems so difficult compared to desktops. I would work on a desktop any day, laptops...another story. Even if your take a picture you got to know where the cords go and the screws and stuff. How do computer guys do it?
+Robert DIY Well ya I would do it the same day also but it is still difficult in my opinion to put it back together. Getting it apart is easy, back together however, well that is another story. I picked up a laptop from the dump, so it did not matter what happened to it. But I tore it all apart then could not get it back together. So I just took it back to the dump and left it there pretty much in pieces. Did not matter to me what happened to it, but still frustrating that I could not get that laptop back together. At least it was practice.
+Zzzzzz... Don't let it bother you. We are created differently. Some people are "naturals" at putting things "back" together, that they take apart. Others are great at remembering what spices people like on their steaks. I always tell people, if you don't like working on your car, make sure you make enough money to pay someone else to do it.
+Robert DIY Thats the thing, I want to be a computer technician and if I cant seem to put a laptop back together after fixing the motherboard or a CPU, not going to have the job very long. I know there must be Technics out there to putting it back together, just got to find it.
Hmmmm, why do you want to do that? You should fine a work field that gives you energy and excitement when doing it. When you are enjoying what you do, life will reward you.
I have a similar HP DV6, and it was suffering from random shutoffs (due to overheating, I believe). So, I ran the OCCT stress test to hit the cpu cores at 100%. It ran for only 3 minutes and the cores registered 63.8C before the laptop shut off. With your video, I was able to completely disassemble my laptop, clean out the HSF and apply new thermal paste to the CPU, and put it back together. I did not think it would work at all, but your video helped immensely. After it was reassembled, I ran the stress test again, and this time it ran for 10 minutes before I manually halted the program. The cpu cores registered 65C by the end of the test, but there was no random shutdown. I do not normally run the cpu at 100%, so I am hoping the issue has been solved. However, I do not think I could have taken it apart without your great tutorial. Thank you.
Can you please tell that this specific model support SSD M2 ? if i want to keep my regular HD along with 2.5 SSD how would you suggest I should proceed?
Robert: Thanks a LOT for making and posting this video. I have an HP Pavilion dv6 just like the one in this video, and I wanted to make it bigger/stronger/faster by upgrading th RAM, Hard drive, ad CPU, all of which I found a LOT cheaper than buying a new machine, and this video is EXACTLY the one I needed to do what I'm planning to do to my computer. Your instructions and video are hands down farrr better than the others I have found while researching You Tube for videos to perform these upgrades. I rate your video and instructions a 10 out of 10 fo those who might want to watch/use it for their upgrades/repairs etc. Thanks again, Chuck Alexander
Robert: You're welcome. I also noticed you have a lot of volvo videos. One of my sons has a volvo and trys at least to do all his own mechanic work on it, so those will really help him.
hey buddy excellent video I appreciate your expertise and verbal communication. This is exactly the video I needed. However I think my issue is electric. I get no lights at all. I would like to remove the m/b as shown GREAT then test transistor & power jacks/voltage. I don't have a schematic so I don't know the voltage per each coil etc. Is this something you can help me with? Question why you in the car? heeheeheeheeheehee :)
+Cal Bankhead LOL, You likely have a broken power lead at the plug. Have you tested the power brick? Are you sure it is good? Does the place you plug the cord into seem tight?
what I did do was use another HP adapter from another HP that I own & no results also the power adapter from the bad laptop is GOOD. so I think it I something internal
+Robert DIY nervermind i have l2 chipset, the maxim cpu compatible with my chipset it's the A10-5570m. I think it's worthless at the moment to upgrade for US$80. I have ram 8gb btw.
Robert your video is very useful I replaced the cpu of my machine and now it is working fine after several assemble. The idea of the template is wonderful I disassemble others laptop and always I have a mess with the screws! ! Congrats
Hi Robert please help. My laptop start up when I change the CPU, works good until I turn it off, then, it won't boot windows again. I replaced the fan and cleaned, again its start fine until I turn it off, then don't boot windows again. I don't have any clue what to do. Blink error is CPU.
CPU may be bad again. It may be overclocking. Have you replaced the mother board battery? I would leave it on if I were you. I leave all of mine on all the time.
Robert DIY yes thanks for ask, i already did just now but didn't see anything connected, just a piece of welded metal. And now my windows is crashed x.x hope nothing serious happen
Thanks for this awesome video!! It's so great to find someone who's taken the time to provide a helpful commentary, great stuff!!
You are welcome
I've worked on quite few laptops and desktops, and I watch youtube for tut's on what ever model i'm working on. I think this is by far the most detailed one i've seen yet. WOW.. That was a very impressive tutorial ! I would like to suggest when you removed the processor, you should have mentioned the gold triangle location. I'm sure you will on your tut where you put it back together, if there is one. Nice video.
Thanks for the tip.
yes it´s very perfect :)
Robert, Thanks so much, I just love to fix computers and your video was very helpful. Now I'm about to try to put this laptop back together, wish me luck. cj
OK
Thank you man
You are welcome
I wish I had seen this years ago but I know that the bios was corrupt however HP does not now offer the bios for this 1215sa dv6 model so zi am unable to download this to a usb flash drive
Ouch
Thanks!! my english it´s not good but the video is super useful for me
Saludos desde Chile :)
Glad you liked it!
I only need to my keyboard its not working right. do i have to do all that i dont wanna pull out cards and stuff. Want to get it to flip out like you did to possibly clean keys are messed up an screwing up my online keyboard too
You need to replace it.
ya I think so its causing start up and mouse errors from stuck keys.I should of left it alone making it worse. Is the single screw important too because it was broken?
I'm not sure.
can we assemble INTEL processor in HP pavilion dv6 instead of AMD????
You will likely need a different mother board.
Can i change the videocard of the dv6?
+luvkosizia I don't think so. Maybe add a pci slot one or something like that.
Is this laptop compatible with the amd a10-5750m? I've found a similar laptop on ebay and I have an a10-5750m from an older laptop that broke so I was wondering if it would work.
I think the processor is married to the motherboard.
@@RobertDIY Thank you for clearing that up for me
There is a version of that machine that tends to overheat the graphic chip, the solder balls under it become disconnected, much like the xbox i think, im not into game consoles so dont quote me lol.
if its the graphics chip then it will need to be removed with a reflow station and the board cleaned and mask solder depositing on the pcb before the chip is reflowed.
I hope it is the cpu though, laptops can be a pain to repair at times :-(
Laptops are a good source of spare screws lol, why fit just 6 pcb hold down screws when the manufacture went mad with 20, silly arses lol :)
zx8401ztv I hope it's the cpu as well.
Man how do you remember which screws go where and what stuff goes where? Laptops seems so difficult compared to desktops. I would work on a desktop any day, laptops...another story. Even if your take a picture you got to know where the cords go and the screws and stuff. How do computer guys do it?
+Zzzzzz... The same day works best. lol.
+Robert DIY Well ya I would do it the same day also but it is still difficult in my opinion to put it back together. Getting it apart is easy, back together however, well that is another story. I picked up a laptop from the dump, so it did not matter what happened to it. But I tore it all apart then could not get it back together. So I just took it back to the dump and left it there pretty much in pieces. Did not matter to me what happened to it, but still frustrating that I could not get that laptop back together. At least it was practice.
+Zzzzzz... Don't let it bother you. We are created differently. Some people are "naturals" at putting things "back" together, that they take apart. Others are great at remembering what spices people like on their steaks. I always tell people, if you don't like working on your car, make sure you make enough money to pay someone else to do it.
+Robert DIY Thats the thing, I want to be a computer technician and if I cant seem to put a laptop back together after fixing the motherboard or a CPU, not going to have the job very long. I know there must be Technics out there to putting it back together, just got to find it.
Hmmmm, why do you want to do that? You should fine a work field that gives you energy and excitement when doing it. When you are enjoying what you do, life will reward you.
I have a similar HP DV6, and it was suffering from random shutoffs (due to overheating, I believe). So, I ran the OCCT stress test to hit the cpu cores at 100%. It ran for only 3 minutes and the cores registered 63.8C before the laptop shut off. With your video, I was able to completely disassemble my laptop, clean out the HSF and apply new thermal paste to the CPU, and put it back together. I did not think it would work at all, but your video helped immensely. After it was reassembled, I ran the stress test again, and this time it ran for 10 minutes before I manually halted the program. The cpu cores registered 65C by the end of the test, but there was no random shutdown. I do not normally run the cpu at 100%, so I am hoping the issue has been solved. However, I do not think I could have taken it apart without your great tutorial. Thank you.
you are welcome.
Excellent 👌👌👌 thanks sir🤩🤩
You are welcome
My computer does not bring the part that goes above the graphics card of this same model, affects something the performance???
Less features.
Excellent step by step directions, many thanks. Very wise about reassembling until new part arrives.
+hopsing72 thanks for watching.
Thanks so much. Used this video to replace the thermal paste and now it´s running like new again!!
Nice.
Can you please tell that this specific model support SSD M2 ? if i want to keep my regular HD along with 2.5 SSD how would you suggest I should proceed?
th-cam.com/video/ybZV6EKcewg/w-d-xo.html
Man, I don't know. Does the shoe fit?
Robert: Thanks a LOT for making and posting this video. I have an HP Pavilion dv6 just like the one in this video, and I wanted to make it bigger/stronger/faster by upgrading th RAM, Hard drive, ad CPU, all of which I found a LOT cheaper than buying a new machine, and this video is EXACTLY the one I needed to do what I'm planning to do to my computer. Your instructions and video are hands down farrr better than the others I have found while researching You Tube for videos to perform these upgrades. I rate your video and instructions a 10 out of 10 fo those who might want to watch/use it for their upgrades/repairs etc. Thanks again, Chuck Alexander
+Chuck Alexander Thanks for your kind words and for watching.
Robert: You're welcome. I also noticed you have a lot of volvo videos. One of my sons has a volvo and trys at least to do all his own mechanic work on it, so those will really help him.
Nice. Thanks again.
hey buddy excellent video I appreciate your expertise and verbal communication. This is exactly the video I needed. However I think my issue is electric. I get no lights at all. I would like to remove the m/b as shown GREAT then test transistor & power jacks/voltage. I don't have a schematic so I don't know the voltage per each coil etc. Is this something you can help me with? Question why you in the car? heeheeheeheeheehee :)
+Cal Bankhead LOL, You likely have a broken power lead at the plug. Have you tested the power brick? Are you sure it is good? Does the place you plug the cord into seem tight?
what I did do was use another HP adapter from another HP that I own & no results also the power adapter from the bad laptop is GOOD. so I think it I something internal
+Cal Bankhead ok
can i upgrade my a8-3500m to other amd cpu? how i know if it's compatible with the 6620g gpu and the rest of the chipset?
+Camizer I would go to the HP site and see what processors came in similar machines. Max out the ram first.
+Robert DIY nervermind i have l2 chipset, the maxim cpu compatible with my chipset it's the A10-5570m. I think it's worthless at the moment to upgrade for US$80. I have ram 8gb btw.
Robert your video is very useful I replaced the cpu of my machine and now it is working fine after several assemble. The idea of the template is wonderful I disassemble others laptop and always I have a mess with the screws! ! Congrats
+Mariela Gutierrez good deal. Thanks for watching.
Hi Robert please help. My laptop start up when I change the CPU, works good until I turn it off, then, it won't boot windows again. I replaced the fan and cleaned, again its start fine until I turn it off, then don't boot windows again. I don't have any clue what to do. Blink error is CPU.
CPU may be bad again. It may be overclocking. Have you replaced the mother board battery? I would leave it on if I were you. I leave all of mine on all the time.
The template for screws is an excellent procedure.
thanks for watching.
Is there any upgraded processors that would go right in on this model of laptop and where would I find one
I usually get them from eBay.
Any specific ones I should look for I was looking to upgrade mine and I am inexperienced in looking for components
Send me the computer and I'll check it out for you. 🤔
Thank you!! Your video was very helpful!!
You are welcome.
Thanks man
You are welcome.
What is cpu support for HP Pavilion dv6-6145dx?
I have no idea
@@RobertDIY do you remember the chipset ?
Nope. Have you checked their website? You can find all of the details of all of their computers on the HP site.
@@RobertDIY no , nvm I dident win the Ebay auction
Thanks for this video and it's very useful
+Ravin Lakmin good deal. Thanks for watching.
hu, my sd card reader does not work, wheres the connector? can i fix that?
Did you open the case?
Robert DIY yes thanks for ask, i already did just now but didn't see anything connected, just a piece of welded metal. And now my windows is crashed x.x hope nothing serious happen
+Camizer yikes. It's been a while and I don't remember.
Great tear down - thanks!
You are welcome.
Good job Robert, Thank you so
You are welcome.
thanks this is very helpful
+awesome_bro 056 thanks for watching
Its your agian
ayyaya
Huh?
@@RobertDIY I seen your hp elitebook video lol
Thanks.
Thanks sir!
+Katsura Edamaru you are welcome