Practice Problem 4.9 Fundamental of Electric Circuits (Sadiku) 5th Ed Thevenin + Independent Source
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Find the Thevenin equivalent circuit of the circuit in Fig. 4.34 to the
left of the terminals.
Answer: VTh 5.333 V, RTh 444.4 milliohm
University of Minnesota EE 2006 Electrical Circuit Analysis
University of Houston ECE2201 Circuit Analysis I
George Mason University ECE285 Electrical Circuit Analysis
Missouri State University EE2100 Circuits I
Stony Brook University PHY 335 Electronics and Instrumentation Laboratory
Stony Brook University ESE271 Electrical Circuit Analysis
Colorado State University ECE103 DC Circuit Analysis
University of Texas at El Paso EE2351 Electric Circuits
University of Kansas EECS212 Circuits II
University of Rhode Island ELE212 Linear Circuit Theory
Southern Illinois University Edwardsville ECE210 Circuit Analysis I
Prairie View A&M University ELEG3301 Network Theory
Playlists:
Alexander Sadiku 5th Ed: Fundamental of Electric Circuits Chapter 3: • Problem 3.2 Alexander ...
Alexander Sadiku 5th Ed: Fundamental of Electric Circuits Chapter 4: • Problem 4.1 Fundamenta...
Alexander Sadiku 5th Ed: Fundamental of Electric Circuits Chapter 15: • Alexander Sadiku 5th E...
Basic integrals: • Integral of dx/sqrt(16...
E-mail: ardiantosatriawan@gmail.com
Twitter: ardisatriawan
Sir, your videos are very helpful and your solved questions are very easy to understand.
Thanks!
@@ArdiSatriawan In method 2 to find Rth you add a voltage source of 1V and said we can give any value to it.So my question is can we give 2,3,4....V to it??
@@whatsnew2807 yes
@@whatsnew2807 Yes we can
thank you so much for solving all of the problems for this book, it really helps me in my subject
Not all, not yet.
@@ArdiSatriawan i'm looking forward to it! thanks again for your hardwork :D
th-cam.com/video/CLEd_i0yQ9A/w-d-xo.html
thanks a lot, Tomorrow I have an exam and I didn't understand this problem, thanks man
Happy to help
I am so impressed by ur network solving skills
Thanks and you're welcome!
Don't forget to like and subscribe!
Do you have any video on Example 4.9 solved by Nodal analysis sir?
This one? th-cam.com/video/Jfy91QaCaQY/w-d-xo.html
@@ArdiSatriawan not this sir, I need Example 4.9 but you gave me Practice problem 4.9
ok
thank you so much, your videos are very helpful,
but i have a question,
at 15:33 why did you assume that the current go to the rite?
You can assume both left or right, no problem
Thank you so much. That was brilliant.
You're welcome
th-cam.com/video/CLEd_i0yQ9A/w-d-xo.html
Excuse me, can i ask why don't we use method like Problem 4.8 (previous video) when we want to find the Rth. I just confused
You can
@@ArdiSatriawanI just tried it and the results is different. like the Problem 4, First i remove all the sources and then just 5 ohm + 3 ohm // 4 ohm that just left. And then I calculate 8 ohm // 4 ohm. What's wrong with this method? Thank you for helping me, next day is UTS
@@randomppl7430 Be careful about dependent sources.
16:22 how come you can assume Vq is 1?
Can't remember
Thanks
BTW which country are you from??
Ponorogo
why 1 voltage taken to calculate Rth ???
To calculate Rth
Thanks for helping with our problems sir. Please sir I have a question, can we use the current source , I mean instead of using V=1v we use I=1A.
I'm not having my way using the current....
You can
@@ArdiSatriawan please sir, can I try solving it and send. Maybe you can please help me check where am having a problem cuz I couldn't finished it as I was stuck at some point.
Very helpful and easy 😍💫
ok
Sir please solve practice problem 10.9 in Alexander Saiduku book 🙏🙏🙏🙏
Let me see
th-cam.com/video/CLEd_i0yQ9A/w-d-xo.html
Hey, calculating Vth by mesh analysis and using concept of supermesh as there is a dependent source between two meshes is giving wrong answer. Can you explain why we can't use that concept here??
You can
@@ArdiSatriawan but it's not giving correct answer 🥺.
@@kanishhh yeah, there's absolutely no chance of miscalculation..
@@ArdiSatriawan is there any exception that I'm missing 👀?
For Rth we turn off independent source but here you doesn't turn off why????
May be you should listen to my explanation carefully.
@@ArdiSatriawan sory i don't see the 2nd method to calculate Rth.
3:30 hello, why it is 42-7 Vp?? 🤔
See the circuit?
eh may I ask why is vq equal to 1v at 16:28?
Look at the circuit?
Is it because node vq is in parallel with source 1v on the right?
Thank you so much!
Welcome
This helps a lot. Thanks
Welcome
so helpful
Thanks! Don't forget to like and subscribe
Love from india
You're welcome!
Don't forget to like and subscribe!
Sir please solve the practice problem 14.2. Please sir
Finding poles and zeros should be easy as long as you get the transfer function.
@@ArdiSatriawan how to find gain final voltage/ intial current give hunt please sir
@@bilalarisar1687 Basic circuit analysis should be find to fine those.
@@ArdiSatriawan ok thanks sir for reply thanks sir
Thank you
are you chinese?
I'm Indonesian
@@ArdiSatriawan do you have class on power system & machine
@@nextnapsengineering.6153 no
nice sir
Ok
th-cam.com/video/CLEd_i0yQ9A/w-d-xo.html
Why va =4/7vp
Voltage divider principle
@@ArdiSatriawan thanks a lot
Tes komen di sini
Ok
This is so slow
I can't tolerate
Who are you?
thanks you sir....what's your facebook id, sir?
Facebook is just for my personal relationship, I won't add anyone who I don't know in real life.