Hello, thank you for this very useful video! I have the same problem but i can't find this speaker (100 ohm / 0.1 w / 27 mm diameter) on any site. What site did you buy your from, please?
I have the same problem, I tested with several different microphones. there is 1.5v on the microphone plug and 0.7v on the cartridge. It seems a bit too low, maybe the AGC has failed?
Hello, thank you for this very useful video! I have the same problem but i can't find this speaker (100 ohm / 0.1 w / 27 mm diameter) on any site. What site did you buy your from, please?
I used 32 ohm .
www.aliexpress.com/i/4000896117086.html
Do You know What cable they use
It is bluetooth headsets
my ws alert xp wont power on. ive had them for 4 years, randomly stop working. any advice?
A broken wire or more in the cable from left to right side
mine keep redialling my last caller and wont turn off. any ideas? where can i get parts? @repair done
I think your button is just stuck
Is somebody know how to turn OFF hearing protector for not block max volume? Help please
I have a pair that simply wont turn on. Any ideas
I just repaired a set with the same problem. It was a faulty cable. (The one on your head.)
What do you use to screw up the cover behind the batery?
Have you found out what screw is holding the battery section?
You know what to do if they wont show up in your phone when you try to pair?
Yes need to pair, in my way was dead one speaker
@@repairdone4092 im not able to pairt it with my phone, it wont show up even after pressing the button, tried with my brothers phone as well
@@Kalleballethetwo Hold the button pass the "Power on" and keep holding the button down. Eventually it will say bluetooth. Then you release.
Any ideas on why on a phone call the microphone is so low , that people can only hear my voice very faintly
The microphone hole may be clogged if not try to change mic.
@@repairdone4092 this is the second mic , do you know of any better microphone that would fit
Sorry don't have now such headphones now.
I have the same problem, I tested with several different microphones. there is 1.5v on the microphone plug and 0.7v on the cartridge. It seems a bit too low, maybe the AGC has failed?
Does some body know what hi is repairing in this video hahahhaha
Replacing the speaker.