Rocket RC Motor Supersonic Sensored Brushless 17.5t and 120A brushless esc 1st look

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ต.ค. 2024
  • Welcome back to Wtf Rc Cars,
    Rocket RC Motor Supersonic Sensored Brushless 17.5t Motor 120A brushless 1st look
    £7.46 40% OFF|Program Card for Rocket Turbo TS160
    www.aliexpress...
    59.18£ 40% OFF|Rocket-rc Motor Supersonic Sensored Brushless 540 Motor 120a Brushless Esc
    www.aliexpress...
    rdmodels.co.uk/
    399 Sheffield Road,
    Chesterfield
    Derbyshire S41 8LS
    01246 942777
    info@rdmodels.co.uk
    Opening Hours Mon-Fri 9.00-5.00 / Sat 10.00 - 4.00
    CNHL batteries link
    chinahobbyline...
    US PRO Tools 4 Piece Japanese Industry Standard Screwdriver Set JIS ph1,2,3-1616 £10.35
    amzn.to/3XI979Q

ความคิดเห็น • 85

  • @galkawarrior
    @galkawarrior 4 หลายเดือนก่อน +2

    Thank you for sharing! I almost bought a pair of these for my Clodbuster, but found out that the ESC can't reverse the rotation of the motor, which is required for one of the motors in the Clod. I'll be looking for an alternative then. 😊

    • @WTFRCCars
      @WTFRCCars  4 หลายเดือนก่อน +1

      Yeh there for race rc's and all drive the same direction :)

  • @dejanzdravkovic9010
    @dejanzdravkovic9010 6 หลายเดือนก่อน +2

    Always nice to see your videos......❤

    • @WTFRCCars
      @WTFRCCars  6 หลายเดือนก่อน

      Glad ya like em :)

  • @acceler8n
    @acceler8n 4 หลายเดือนก่อน +1

    Your videos have helped me a lot! Thank you.

    • @WTFRCCars
      @WTFRCCars  4 หลายเดือนก่อน

      Glad ya like em :)

  • @enricomiceli5517
    @enricomiceli5517 ปีที่แล้ว +3

    Tested myself today, the control is impeccable, since is sensored and of decent quality minimal foreward and backward are super controllable and very sensible and responsive after some remote setting, i definitively suggest to get the program card for some more adjustment but for the rest is absolutely ok. A little loudbut fast!

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      Great to hear!

    • @christokolev6311
      @christokolev6311 ปีที่แล้ว +2

      Which program card is compatible

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      The one in the video

    • @christokolev6311
      @christokolev6311 ปีที่แล้ว +1

      @@WTFRCCars ok, and do you think it's necessary, because I don't wanna spent 15$ if it's not

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      It makes.life so much easier to set up the esc

  • @exprymer
    @exprymer ปีที่แล้ว +3

    Hello! I have a newbie question but after the calibration process, which I assume it is just as you said ( can you confirm it for me?), Domwe need to calibrate it after every power-on?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      Hi no you only calibrate an ESC when you 1st bind a transmitter to an RC as you need to tell the esc how far the transmitter will travel in both forward/backwards and where the neutral point is :)

  • @leedyer1369
    @leedyer1369 8 หลายเดือนก่อน +3

    Hi wondered if you can help .I have installed the motor n esc correctly but motor is turning the wrong way how can I correct this thanks

    • @WTFRCCars
      @WTFRCCars  8 หลายเดือนก่อน +2

      This is a race motor/esc so they all spin the same direction and can not be reversed as they are brushless and sensored, are you sure it's spinning the wrong way or do you just need to reverse the channel on you transmitter?

    • @MsRomanFed
      @MsRomanFed 9 วันที่ผ่านมา

      Just replace 2 phases and 2 sensors accordingly.
      But the best way is to disconnect its sensor because its software is SO BAD that it works better without the sensor

  • @stokedGSXR
    @stokedGSXR ปีที่แล้ว +1

    Does it have a blinky mode? If not, the hobbywing justock is still a better option at a similar price point... Especially for racers

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      So the just stock is just that it's a stock esc and not able to change the timing and other setting also cost around the same price as this whole ESC and motor set up so it's not really a good companion as both are very different use cases :) this is a cracking set up if you need like I do a 17.5t motor but you can adjust the timing and other setting and it allows this at a much lower price, now is the a replacement for an xr10 pro elite no definitely not but it's a good option for a whole lot less if you don't need the features or amps of the xr10 pro :)

    • @stokedGSXR
      @stokedGSXR ปีที่แล้ว +1

      @@WTFRCCars agreed! However having a blinky option would allow it to do Sortof "double duty" and allow both blinky and mod users use it. Just my opinion,

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      Yeh definitely agree with what ya saying and I'll have a look into it and see if it has the mode cos I know many tracks that have the class :)

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +2

      So i have had chance to set it up in an RC and yes it does have blinky mode when boost and turbo are off :)

    • @stokedGSXR
      @stokedGSXR ปีที่แล้ว +1

      @@WTFRCCars thank you for doing this! Going to grab a set of these for a few builds for friends that are on a budget,

  • @joealbuquerque5557
    @joealbuquerque5557 ปีที่แล้ว +1

    Oi é bom esse combo ? Você recomenda para um snrc r3g 1/10 ?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      Yeh would work well in that RC :)

  • @enricomiceli5517
    @enricomiceli5517 ปีที่แล้ว +1

    I just got this brushless combo, 3625 kv motor plus 60A esc. How is it? I couldn't find any rocket rc V2 review online in witch the product looked like the one i ordered from package and detail except yours. Are the dafault setting decent? What do u think?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      Well this one works well for what it's designed to do haven't had any issues so far, as for the settings really depends on how you want it to work

    • @enricomiceli5517
      @enricomiceli5517 ปีที่แล้ว +1

      @@WTFRCCars i have a tt01e and i use it for carpet racing , i hope the base punch is decently set and i need something that will give a good powerful acceleration and gradual and precise deceleration in corners. Does it have some delays (u press the gas and it takes a few second for the car to move) or some cogging (virtual impossible with the sensored motor)?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      No cog as you say it's sensored and I run it in a carbon touring car so if it's good enough for that you should have no issues in anything else there basically a bl120

  • @joealbuquerque5557
    @joealbuquerque5557 ปีที่แล้ว +1

    my hsp 94111 is not working, the motor turns to the wrong side even reversing the radio, I need to know if I can use a 3.5mm banana connector on this motor and esc, the seller does not answer my questions, help me thanks

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      The wires are soldered directly to the esc and motor, and it's sensored so you can't just reverse the wires

    • @joealbuquerque5557
      @joealbuquerque5557 ปีที่แล้ว

      soldei certo , defeito no motor

  • @rheymarktabordan4703
    @rheymarktabordan4703 6 หลายเดือนก่อน

    Can you turn on the boost and turbo without a program card?

    • @WTFRCCars
      @WTFRCCars  6 หลายเดือนก่อน

      From what i can see only with the programming card

  • @joealbuquerque5557
    @joealbuquerque5557 ปีที่แล้ว +1

    Tem um vídeo calibrando ele de verdade na prática? Estou com dificuldade, o meu o motor gira para o lado errado , não consigo acertar , nem no reverso do rádio da certo

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      You have to use the program card to reverse motor direction but some brushless sensors esc's can't reverse

    • @joealbuquerque5557
      @joealbuquerque5557 ปีที่แล้ว +1

      I am not able to revert on the radio or on the programming card

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      @joealbuquerque5557 It may be same as the hobbywing 10bl120 where they only work in one direction as all the race rc's seem to only need one way

  • @tomasborovian
    @tomasborovian ปีที่แล้ว +1

    Tested on-road or off-road? I need a FWD rc rally engine.

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      The motor and esc will work fine for any on or off road just depends on what class your racing in as to what motor limit you have

    • @tomasborovian
      @tomasborovian ปีที่แล้ว +1

      I only want to drive a hobby using a 17.5T engine.I want to use it on a carten m210r rally chassis

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      Yeh will be fine for it

  • @chrismagallanes8858
    @chrismagallanes8858 9 หลายเดือนก่อน +1

    So it can't do a 3.5t motir

    • @WTFRCCars
      @WTFRCCars  9 หลายเดือนก่อน

      Nope 5.5t is the lowest it will run

    • @chrismagallanes8858
      @chrismagallanes8858 9 หลายเดือนก่อน +1

      @@WTFRCCars dang I have a 3.5t motor just laying to be used

    • @WTFRCCars
      @WTFRCCars  9 หลายเดือนก่อน

      @chrismagallanes8858 yeh your going to need a strong esc to run that, the tekin rx8 has no motor limit on 2s but not cheap esc

    • @chrismagallanes8858
      @chrismagallanes8858 9 หลายเดือนก่อน +1

      @@WTFRCCars ok I tried it with my hobby wing xr8 plus but when I full throttle it cuts off

    • @WTFRCCars
      @WTFRCCars  9 หลายเดือนก่อน

      @chrismagallanes8858 yeh too high amp draw and too high kv

  • @exprymer
    @exprymer ปีที่แล้ว +2

    Mate, i'm currently facing the following: I connect the battery, turn on the ESC ( a red light beeps with the pressing) but no beeping ever occurs. When i keep the button pressed it turns into a Blue light (for the calibration procedure) but again no beep at all neither any light.. When i plug the programming card it starts showing zeros and nothing happens.. What could it be?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      Sounds like a fault esc

    • @louisabelhard9596
      @louisabelhard9596 5 หลายเดือนก่อน

      Hi i have the same problem have you found the solution?

    • @WTFRCCars
      @WTFRCCars  5 หลายเดือนก่อน

      It's a hard one to find what the issue is as I can't make mine do it mine just works fine all the time :(

    • @louisabelhard9596
      @louisabelhard9596 5 หลายเดือนก่อน +1

      @@WTFRCCars i did a mistake when i was calibraring i did read the manual so i long pressed and it beeped while the car act like elevtrocuted

    • @louisabelhard9596
      @louisabelhard9596 5 หลายเดือนก่อน

      @@WTFRCCars hey so i got it recalibrated by some1 and its working pretty good but for some reason the esc is still blinking blue even after i recalibrate it do you think this is normal? And also can you make a video of the esc after the calibration does it still blink and maybe can you give me a video of it already calibrated and running does it stays blinking blue like mine? 😁😅 thank you

  • @joealbuquerque5557
    @joealbuquerque5557 ปีที่แล้ว +1

    Oi amigo tem video como ligar com radio primeira vez ?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      I think I show the set up in this one th-cam.com/video/scxrxbbpfBY/w-d-xo.html

    • @joealbuquerque5557
      @joealbuquerque5557 ปีที่แล้ว

      Eu consegui ligar , mas os comandos ficaram invertidos , não sei o que fazer

  • @tomfastful
    @tomfastful ปีที่แล้ว +1

    Boost turbo ?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      Yeh it has settings for both

    • @tomfastful
      @tomfastful ปีที่แล้ว +1

      @@WTFRCCars program card ?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว +1

      If you watch the vid I show it all

  • @redapplepie7709
    @redapplepie7709 ปีที่แล้ว

    Its any 60a variant for esc bro?

    • @WTFRCCars
      @WTFRCCars  ปีที่แล้ว

      Not sure what ya asking ?

  • @porkbunassassin2295
    @porkbunassassin2295 11 หลายเดือนก่อน +1

    How fo you solder that? Theres almost no room.

    • @WTFRCCars
      @WTFRCCars  11 หลายเดือนก่อน

      No harder than any other race esc to be honest

  • @MsRomanFed
    @MsRomanFed 9 วันที่ผ่านมา

    dont buy rocket rc. Their quality is awful. People complain they burn on the first run. I have few, one of them changes settings randomly (sometimes on-the-go), the second lost its sensor connector and it looks like it was not well soldered.

    • @WTFRCCars
      @WTFRCCars  7 วันที่ผ่านมา

      Surpass are actually the OEM for a good few other manufacturers including hobbywing, their new v6 motors are right up there with some of the best around and are re branded for many other brands so not sure where you are getting your info from ?

    • @MsRomanFed
      @MsRomanFed 7 วันที่ผ่านมา

      @@WTFRCCars I own many of their products. Motors are good, ESCs are all bad. Yesterday we soldered a newly arrived one.