ฝัง
- เผยแพร่เมื่อ 15 พ.ย. 2020
- I picked up these bulbs and man am I surprised on how good these look and how bright they are. They are exactly what I was looking for. below is a link to the product. If you guys would like to me to make a video of something please put in the comments. I always welcome your input and of course thank you for your continued support!
Lasfit LED lights bulbs and or any other Lasfit products please use my link:
lddy.no/teih
Discount code "DanVilla" for 10% off site wide
Bulb size: 921
amzn.to/3wc66Bp
Trim removal kit:
amzn.to/3bKOh4c
*
*
If you would like to purchase a JB4 please use my link!
JB4 Link:
burgertuning.com/?rfsn=467007...
*
*
Instagram:
DanVilla:
dan_villa83... - ยานยนต์และพาหนะ
![[ไฮไลต์] ฟุตบอลชาย ฝรั่งเศส vs อเมริกา รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/oZ9aSS0NEEg/mqdefault.jpg)
This video comparing the OEM bulb versus the LASFIT bulbs is put together very well. Thanks for the good content and visuals.
Thanks, and you're very welcome!
Just got the set for my accord and this video helped me out bro, good looks!
I just ordered myself some a few minutes ago. Looking forward to being able to see better when I go to back up. Thanks for sharing this video with us.
Agreed. Super easy install. You don't even need to take out all tabs out just enough to reach in. The most important part is to make sure you get quality bulbs!
True, I had take them all out to show everyone how to swap the bulbs.
keep up the excellent content man, your videos always has the answer I'm looking for whenever I have a thought of something I want to do.
Thank you! I appreciate the feedback!
Thanks for the hard work man. Keep up the good work 💪
You're welcome! 👍
Awesome video. I just installed these, along with the interior and trunk lights. You made the instructions clear as day. I did ruin the tabs tho lol.
Thanks dan quick and easy install.
Love the before and after at the end
Thank you for this video. I’m doing the same thing for my new Accord Sport 2.0T
No problem! Theres plenty more lighting upgrades on my channel
Lasfit is the only brand I use for LED. If you get the turn signals by the same brand they are extremely bright as well. I actually have the same brand for my interior lights and they are super bright and I highly recommend them for the interior.
Yep I already have them and a video as well, haha. I have all the bulbs upgraded from them now with demos/reviews.
Wow these are great! I was concerned they’d wash out the back up camera. If anything it looks clearer. Good find.
Thanks! I was pleasantly surprised myself
Just ordered mine 👍🏽
Nice!
Just ordered my Lasfit plate bulbs for my 2002 chevy silverado! Waiting on delivery now.
Nice, all of thier stuff is awesome. I'm sure you'll be happy
Just ordered mine last night for my 2017 Cadillac XTS. Do these come with a built in load resistor? Everytime I swap out my dull factory halogens for LED’s, the Cadillac CUE system acts up due to the difference in voltage. Is that likely to happen with these?
damn. what a light 💡 😎
Have you done an install for a front honda emblem that illuminates?
You do not have to remove all the pins and the liner. I just replaced my backup lights on my 2.0 EX-L like four days ago with these same bulbs. All you have to remove are the pins in the corner, 2 total, one for each side.
Yes your correct, but for demonstration and filming purposes I had to remove them all.
I got the bulb and I love it! However those plastic pieces that cover the screws were broken when I was trying to remove them. Do you know where I can buy new ones?
Nice. Amazon or the dealer is your best bet
Good example.
What do you mean static when you braked? I’m thinking of v3 aftermarket taillights but for now I’ve customized my oem tails like you done here. Signal bulbs and white area smoked with film looks nice.
th-cam.com/video/Zrw2C-vPNJg/w-d-xo.htmlsi=mg6AI0E6CVbECWG4
LED lights on Reverse looking so much better! Quick question - how did you access license plate light? From the outside or inside? (On Accord 2019, there is only one in the middle, enclosed with the trunk opener). Thanks!
The license plate light is already led
@@DanVilla7 you're the man! thanks!
I just ordered some for my Nissan frontier because where I live it's really dark I'm in the country
They make a big difference
Btw, you can also just put it in reverse by putting it into accessory mode, pressing your break, then shifting to reverse. No need to turn on the car or do all the song and dance you did.
Thanks for some odd reason never thought of trying that because of the buttons instead of a shifter. I'll give it a try
That’s pretty cool I never knew I have to give it a try
nice, ill put a song and dance thou 😜
Bro thanks for clip! I got them and they look amazing. Quick question though, are the new bulbs supposed to fit perfect? Mine feel weird, there’s some wiggle but they light up fine. Thanks.
No problem! Mine fit perfectly, is it possible it's not all the way down in the housing?
@@DanVilla7 so it’s in the white socket. It goes in but there’s some wiggle room side to side. They turn on fine and work perfectly but I’m low key worried it might mess something up. I’m new to car modding lol I’ll head home later and mess with it again. Thanks for the reply btw!
@@cre25 it wont mess anything up no need to worry. Worst case it would fall out if it were very loose but not likely
@@DanVilla7 this is actually very helpful. I have some anxiety and I’ve been going on about this all morning. I can finally relax. Thank you!!
Where can i find a how to video for license plate light for this car? Or is it same as 9th gen?
Already led no need to change
Are you still liking your JB4? I’m trying to decide whether to go with it or a K-tuner. What’s the pros and cons of each?
Yeah does the job. The pros for the jb4 is not flashing your ecu and having live gauges on your phone. A flash tune may yield a couple more hp and may be a bit smoother. Although I've seen ktuner cars do some pulls and mine seems to pull just as hard by watching videos. Haven't been in one first hand.
If you decide to go with a jb4 please use my link burgertuning.com/?rfsn=4670070.43a634
You honestly don’t need to remove the liner to put in the reverse lights just pull up on the liner carefully and u can actually access them that way just a way to save you some time
Yes you are correct, but for demonstration purposes its easier to show everything with it off. I forgot to mention that in the video.
Got these for my 08 accord. Light works but the base doesn’t fit. Both ways. The housing is just too big. Kinda a shame bc they are gloriously bright. Now gotta return them.
That's because 08 is a different bulb size. Just order the correct bulb for your year. Your bulb size should be a 7440 for a sedan otherwise 921 like mine for a coupe
how are the reverse lights working so far ?
Awesome, they look and illuminate so much better!
Do your led bulbs move a little side to side but not loose enough to fall out ?
No doesn't sound like yours are in properly
hey brother how the LED reverse light holding up? any problem or issues?
They are great zero issues. There's a link in the description for them
Hey Dan, any issues with these after 11 months down the line?
Nope zero issues with these or any of Lasfits products. I highly recommend them
@@DanVilla7 awesome!! I ordered some off Amazon and they arrived today but I’m gonna install them this weekend
Will these bulbs work for a '20 Touring 2.0 Accord?
Yes will fit honda hasn't changed anything in that department. I have a link in the description to their website for all of the products they sell
@@DanVilla7 Awesome - thank you!
What’s the model # for
These ? I’m looking everywhere and everyone is saying random numbers 🤦🏼♂️
The bulb size is 921
Here a link to the bulb I used
www.lasfit.com/collections/t15/products/lasfit-t15-912-921-led-interior-reverse-backup-trunk-center-high-mount-stop-dome-light-bulbs-6000k-pure-white?variant=31658873585748
How have these help up after a year?
Great zero issues or complaints. I appreciate them every time I back up at night.
How come your brake lights don't come on in the trunk part?
Its a sport, the touring gets the lights extending into the trunk portion. It's pretty stupid. Best part is to get that you need the touring taillight for that section pull the rear bumler and install the oem harness. Lets say I've looked into it...
@@DanVilla7 no man. I have them on mine. It's a 2019 2.0t.
You know what I don't have.... Rear vents the center console. I've been trying to figure out why I don't have them.
Is yours a sport? Here check out this vid
th-cam.com/video/tZqE9a4c4bQ/w-d-xo.html
@@clausehardcastle8649 I have the rear vents on mine.
Man sucks about the LED tails didn't have a fix for the static. It's weird that nobody else is talking about it.
Anywho, are you going to be tinting your OEM tails?
Yeah stinks but it was really something I couldn't live with.
It's funny I was just taking about doing that with my friend that has the GLI today. I was considering either redding them put with the cutout on the reverse portion or just tinting the clear section. Still on the fence about it.
@@DanVilla7 i bought the tint for the white part but yet to install it because I'm not sure how I feel about how the turn signals mainly (and reverse) lights lool when it's tinted. Even putting in new LED to replace the bulbs I think kind of looks eh
@@OLuvin well you already bought it might as well just put them on and see how you like it. If you hate it just peel them off, they're not permanent. Nothing to loose at this point
How long does the Lasfit light lasts??
Mine still working flawlessly. They make great products and stand behind them as well.
The best decision you can make is always go LED. They last for a very long time..
Do these ever fall out?
No they fit very well. If yours fell out make sure it's pushed in alll the way