Cool I'm after doing the same thing in the UK, spoke to sc projects about the CrT and wanting a link to remove the pre chamber but they are saying it can't be done, so the zx10r works fine
Actually it can be done.. At your local exhaust specialist, or if you know anyone that does stainless steel welding. But yeah, a lot of the 6R guys basically just whack in the 10R model one since it comes with the link pipe. Enjoy your exhaust! :)
That's why they loosen the header before performing the smashing part. One guy is bracing/supporting the header while the other is hulk-smashing the pipe into position.
i want to do the same thing, but what year of 10r model that the exhaust can fit to 6r? when you buy the slip-on sc project for 10r is it included with the link pipe or you buy it separately?
I meant for the 6R model version you could fabricate a stainless steel mid/link pipe if you wanted to, but since the 10R can be fitted might as well go with that.
Yes the exhaust is original (very rare for imitations to be titanium), the exhaust was free as part of the bike purchase deal, I don't know the exact price for it, more than MYR 2k, installation usually free when purchase exhaust. The dyno run was free too. Normal walk-in dyno run (no tune) is MYR 100.
Almost.. Yes I guess. It's stated for race use only if not mistaken, so it was not designed for street, but nobody cares and use it as they please anyway. :)
For this install the original exhaust gasket was re-used. It is recommended to use a thinner walled gasket. The header pipe edges were flared open a bit to ease the link pipe in, and later tapped back into original position. Yes, it is VERY tight.
TheSighBored Dam I just installed a SC-Project GP M2 slip on and There was No way I could use the Old or New Gasket at all. I installed it without the gasket and still had to use a block of wood to hit it a bit in place. :( I'll have to look into finding a thinner gasket Not sure what applications to ask for .
TheSighBored I contacted Another Dealer from the SC-Project website and they responded with this "Dear customer, yes of course you have to fit it without. Please let us know. Regards" It sounds like the Authorized dealer at motovationusa doesn't really know The SC-Project product very well. Thanks for you're response.
Should be in my wishlist. The dyno sound is amazing.
+Arief Roslan O can't recall exactly, if not mistaken, MYR 100 just for the run (no tuning).
terbaik la azhar...makin didepan lepaih nih
+Arief Roslan I prefer to keep it there.. Unless I plan to go full system in the future. ;)
Bruh,the sound quality is much better than before.LOVES YOUR SUBTITLE!!! Its funny.
Thanks but I just used my mobile phone to record. LoL. Potato going good.
Hahahaha LOL anyway I wish you could fix the Sound Quality when you are using your GOPRO.Before that it didn't encounter any problems.
I'm still not sure how it's different than before though.
Hmm I don't know how to explain. Anyway hop more awesomeness video coming soon
Mate you've been a massive help thanks very much :)
You're welcome.
Cool I'm after doing the same thing in the UK, spoke to sc projects about the CrT and wanting a link to remove the pre chamber but they are saying it can't be done, so the zx10r works fine
Actually it can be done.. At your local exhaust specialist, or if you know anyone that does stainless steel welding. But yeah, a lot of the 6R guys basically just whack in the 10R model one since it comes with the link pipe.
Enjoy your exhaust! :)
el sonido es hermoso megusta mucho muy buen video 📹
I don't like the smashing part. It could loosen the gaskets and the nuts on the headers.
That's why they loosen the header before performing the smashing part. One guy is bracing/supporting the header while the other is hulk-smashing the pipe into position.
how much does sc premium charge for dyno?
Wow, Another awesome video??!! So this exhaust basically bolted on? YOu know by any chance if it'll work on the 2013 model of the ZX6R?
It should fit the same for the 2013.
hahaha..that subtitles...epic!!! XD
i want to do the same thing, but what year of 10r model that the exhaust can fit to 6r? when you buy the slip-on sc project for 10r is it included with the link pipe or you buy it separately?
It's for 2010 ZX-10R can fit the 6R. For the ZX10R it comes as a full set along with the link pipe.
this is an Zx6r model 2009-2012 but the exhaust for what year of zx10r is this ?
I wanna do the same !
CR-T Exhaust by SC-Project Kawasaki / Ninja ZX-10R / 2013 (K11-T38)
Why does it need welding.? Thought I would be a direct fit? Do you need to weld it then?
I meant for the 6R model version you could fabricate a stainless steel mid/link pipe if you wanted to, but since the 10R can be fitted might as well go with that.
Hey, did you remove the prechamber? and if you did what mid pipe did you use? also will the zx6r crt exhaust sound the same or will it be different?
This CRT model is taken from the ZX10R line, because for ZX10R it comes with the link pipe together. Check out the model K11-T38C @ 0:40
+TheSighBored did you force it through the gasket ? or did it fit into the gasket? im trying to install mine but the pipe doesnt fit..
Yes they had to some force to make it fit together with the gasket.
hai thesighbored
can you share the detail
how much is the exhaust includes installation charge and the dyno
thx u. is that ori exhaust
Yes the exhaust is original (very rare for imitations to be titanium), the exhaust was free as part of the bike purchase deal, I don't know the exact price for it, more than MYR 2k, installation usually free when purchase exhaust. The dyno run was free too. Normal walk-in dyno run (no tune) is MYR 100.
is a Crt Almost a straight pipe ??? its too tooo loud on Zx10r gen4 and 5
Almost.. Yes I guess. It's stated for race use only if not mistaken, so it was not designed for street, but nobody cares and use it as they please anyway. :)
hi saibot, can this applied to 2013+ zx6r? and what year is that zx10r ex?
Yes, it can. The bike in the video is a ZX-6R.
He was asking what Zx10 r year exhaust u took , need to know myself
Did you guys use a gasket on the link pipe, or did you guys install it without a gasket. Dam link pipe seems tight?
For this install the original exhaust gasket was re-used. It is recommended to use a thinner walled gasket. The header pipe edges were flared open a bit to ease the link pipe in, and later tapped back into original position.
Yes, it is VERY tight.
TheSighBored Dam I just installed a SC-Project GP M2 slip on and There was No way I could use the Old or New Gasket at all. I installed it without the gasket and still had to use a block of wood to hit it a bit in place. :( I'll have to look into finding a thinner gasket Not sure what applications to ask for .
For GP M2 I'm not sure if it needs the gasket, maybe try checking with SC Project if the gasket is needed?
TheSighBored
I contacted Another Dealer from the SC-Project website and they responded with this "Dear customer, yes of course you have to fit it without.
Please let us know.
Regards"
It sounds like the Authorized dealer at motovationusa doesn't really know The SC-Project product very well. Thanks for you're response.
Enjoy your new exhaust! :)
do you have sc project installation for zx10r 2011-2015?
No, I don't. If I do in the future I will post it up.
alright thanks bro...
alright bro thanks. go take off your catalytic converter it sounds so much better :-)
)
How you finding this exhaust?
My friend is really pleased with it. Sounds beastly, looks badass, and the chart shows gains just as slip-on, no tuning done at this time.
What's with the smashing?????
It was quite tight fit so needed some "persuasion".
nie kat mana nie n brp harga exhausted tu kalau pulsar ns 200 ok tak?
This was at SC Premium Bikes in Sunway, I don't think it will be that suitable for a 200, the pipe diameter may be too large for it.
TheSighBored hmm can u recommend me any exhaust tht suitable for my 200 n the sound must deep like sc crt titanium
I'm sorry I don't think I know which exhaust is suitable for your bike to get the sound you want.
Can try proformance, my bro use it, but 1pot kenot sound like 4pot but better sound than stock one
hahahaha wubb wubbbb wubbb XD
haha *wub* *wub* xP
what a stipid way to install a muffler
There were some fitment issues since it was for the 10R.