It's surprising in America you'll fine some of the baddest toys and tools in the most run down looking barn you'll ever see. Cuz we love our toys and camo....
If you have never heard a 8 to one header, it sounds crazy. It would be easy out the hood and make it easier to put a flame shooter in the exhaust. You know you want to......
I absofuckinlutely love that build. Also love the S10. But Ktator Tot is so much fun looking. And Brent is a tuning genius when it comes to those K's. Kyle can build and Brent can tune. They both can drive. The only thing I WTF when Kyle is building is he'll handle his crank bearings bare handed. Not sure if I'm just old school and they are making them out of new materials. But I was told by Old Man Pops. Never handle crank and cam bearings bare handed. So I never did. I was a sponge back then running our shop if old man was talking about working on a car I shut up and listened. Sry about the novel.
Sry about the novel. If you read this and doesn't get any likes. I'll promise I'll never comment again. Fuck love this car. Think its cuz it reminds me of my third car. I had more money in the engine and drive train and tires. It was true sleeper. Didn't look half bad at 10 yrd. But if I went thou a drive thou. I had to go in reverse cuz the drivers window didn't roll down. Gawd I can talk about it all day. It's what actually got me in to drag racing. And the main reason I built my 78 Pinto runabout with a 80 Lincoln Town Car 400 init. I figured if a big car with decent powah could go fast. What would a light short wheel base car with great powah for the time and budget would do. It got me into low 10's and could have gone faster. But the cage restrictions stopped me. So I became a pretty good bracket racer. But the best thing I liked about the drag racing scene in Oregon ( Portland, PIR ) was the family atmosphere. On the track we would be out for blood and tears and watching ppl blow gears. But in the pits. It was such a family scene. It didn't matter if we was talking to other racers or the fans. We would talk to anyone and help out each other so much. I ran a shop mostly setting up rearends for other racers. Cuz that was our Specialty's and we could get their cars out the same day. But would do everything else for the general public. Did that for 20 yrs. Had many of cars but the Runabout has a special place. But it's why I like this channel. You guys along with just a couple of channels. Like Cleetus and his crew, Boosted Bois, PFI, and Fasterproms remind me of the same family atmosphere. Yeah I watch John Doc but I don't get the same vibe. I just like some of his builds. Like the STRANGER Ranger he's doin right now. But I absofuckinlutely can't wait to see this rEagle make him cry..... That's gonna be glorious P.S. I loved the days I raced. But sure wish we had today's tech back then. But it was fun to have my adjustment tool being a flathead screwdriver....
Sounds like it has instant response! 10/10 from me!
That dyno shack is the shit. Goals
my goodness Iowa is BEAUTIFUL!
That first hit, from like 2500ish to flat out...hot damn boys! I had on 2 different pairs of pants for this video. Love it!
Alright, what crazy sum beech decided to stuff a badass dyno in his shed out in the middle of the sticks...........hell yeah... merica!
It's surprising in America you'll fine some of the baddest toys and tools in the most run down looking barn you'll ever see. Cuz we love our toys and camo....
That’s awesome. Made more power then I was thinking.
It sounds like 1000 hp when it's wide open. 😍
hp and busch light. amazing combination. only thing lacking would be maybe chainsaws or guns? nice job fella's
2:38 Brock tearing into them lattes
I’d love to rep motion raceworks! How about some stickers or something for my ls foxbody! 3 weeks out till converter gets here
Love this series. Need to do a series with one of your drag cars.
Are you guys gonna paint it black? Or give it a badass freedom livery? Maybe Dale Earnhardt nascar livery?
Those flaps win the build contest.
If you have never heard a 8 to one header, it sounds crazy. It would be easy out the hood and make it easier to put a flame shooter in the exhaust. You know you want to......
Nice, 550 hp!!!!! You just tied Fasterproms smart car!!!!?
I was just thinking the same thing, 4cly on 15 lbs of boost making the same wheel hp as supercharged ls 😄
I absofuckinlutely love that build. Also love the S10. But Ktator Tot is so much fun looking. And Brent is a tuning genius when it comes to those K's. Kyle can build and Brent can tune. They both can drive. The only thing I WTF when Kyle is building is he'll handle his crank bearings bare handed. Not sure if I'm just old school and they are making them out of new materials. But I was told by Old Man Pops. Never handle crank and cam bearings bare handed. So I never did. I was a sponge back then running our shop if old man was talking about working on a car I shut up and listened. Sry about the novel.
brent is twice the builder that kyle is. have you seen the bully?
@@JoeMtMan that k-series has earned its keep. It deserves a good crank polish and some fresh bottom end bearings, and maybe a smidge more boost 😉
@@Vann_Scale_Modeling K swap through a manual vs. a 600k mile LS through a $200 TC slushbox.
It'd be a shame if you guys blew it up and had to rebuild it before the next Cleetus and Cars. 😏
I enjoy the vlogs, Brothers!
What gen motor?
Stock truck ecu?
How you tune the fuel?
What is the finish afr?
What is the finsh lumbar?
What is the max rpm?
I want to know more about that GTO on the lift. Time for the party pully.
If it rains on the way down, Lucas should trailer surf with the purple power and a brush 🤣🤣
Should of had Happel tune it,those are rookie numbers
That's the dyno from Deliverance.
It sure squealed like a pig that's for sure
Website for the dyno?
Bryan Cranston is a good tuner. 👍🏻
Good news though that 550 at the tire going thru a shitty converter probably close to 625 to 650 at the crank. Not bad for a clapped out engine lol 🤯
How clapped out is it really when your making that much steam??
622k miles and just getting started
Party on
You're going to have tractor flap failure running them dry like that LOL
How do I go about getting one of your banners for my race trailer? I want one lol
How the hell dose a LSA get 622k miles that's crazy shit
Craig Voll it’s the engine. Not the blower itself
It’s a 5.3 truck engine with a Lsa blower on it
Its a 250 dollar 5.3 truck block with an LSA blower.. come on bro..
Can I put LSA blower on l83 5.3 engine
Got any lsa blowers laying around you want to sell?
I’ll take care of her when you guys are done with her
Dyno in a shed
Is this on 93?
Show was great beer selection needs improvement....
It really has 622k miles?
That's allot
Sry about the novel. If you read this and doesn't get any likes. I'll promise I'll never comment again. Fuck love this car. Think its cuz it reminds me of my third car. I had more money in the engine and drive train and tires. It was true sleeper. Didn't look half bad at 10 yrd. But if I went thou a drive thou. I had to go in reverse cuz the drivers window didn't roll down. Gawd I can talk about it all day.
It's what actually got me in to drag racing. And the main reason I built my 78 Pinto runabout with a 80 Lincoln Town Car 400 init. I figured if a big car with decent powah could go fast. What would a light short wheel base car with great powah for the time and budget would do. It got me into low 10's and could have gone faster. But the cage restrictions stopped me. So I became a pretty good bracket racer. But the best thing I liked about the drag racing scene in Oregon ( Portland, PIR ) was the family atmosphere. On the track we would be out for blood and tears and watching ppl blow gears. But in the pits. It was such a family scene. It didn't matter if we was talking to other racers or the fans. We would talk to anyone and help out each other so much. I ran a shop mostly setting up rearends for other racers. Cuz that was our Specialty's and we could get their cars out the same day. But would do everything else for the general public. Did that for 20 yrs. Had many of cars but the Runabout has a special place.
But it's why I like this channel. You guys along with just a couple of channels. Like Cleetus and his crew, Boosted Bois, PFI, and Fasterproms remind me of the same family atmosphere. Yeah I watch John Doc but I don't get the same vibe. I just like some of his builds. Like the STRANGER Ranger he's doin right now. But I absofuckinlutely can't wait to see this rEagle make him cry.....
That's gonna be glorious
P.S. I loved the days I raced. But sure wish we had today's tech back then. But it was fun to have my adjustment tool being a flathead screwdriver....
tunes the reagle in boost weather then brings it to hell i mean florida lol no wounder she dint like life here
Should of just put some zoomies on it instead of those stupid individual up pipes sounds like complete shit but watever to each their own