How To Polish An Aluminum Motorcycle Motor
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2018
- Sweet Scoot's Favorite Tool to having a Sweet Scoot goo.gl/z9TrgR Here in this video we show you how to start the tedious process of Polishing your motorcycle's many aluminum parts, mainly the engine.
THE BEST Ceramic Coating EVER goo.gl/z9TrgR
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
TOOLS:
CAMERA Used For Videos: amzn.to/3fqBVPp
______________________________________________
USA Tools
Dewalt Drill amzn.to/2AXc2ls
Dremel Tool amzn.to/2rtAQxR
Mothers Polish amzn.to/2C18A9Z
Mothers Ball amzn.to/2SEL6ij
12" Drill Bit Extension amzn.to/2kk5BVz
Drill Extension Set amzn.to/2icfIHG
303 UV amzn.to/2zTBRms
Aluminum Polishing Kit amzn.to/2zppltV
Eagle1 Wadding amzn.to/2Pu7Lff
2000 Grit amzn.to/2zSfMqj
3000 Grit amzn.to/2yYFpCt
Micro-Fiber amzn.to/38PVMVv
Venom amzn.to/35SpPeC
Spray Bottles amzn.to/2zSlp7S
______________________________________________
Camera Used For UK Video:
amzn.to/2xIvaG8
United Kingdom Tools:
Dewalt Drill amzn.to/2SBd7r4
Dremel Tool amzn.to/2B7VzvQ
Drill Extensions amzn.to/2B8td4p
Mothers Ball amzn.to/2BaBZyJ
Polishing Kit amzn.to/2QNI1zf
Eagle Wadding amzn.to/2QF5yT9
Fiber Towels amzn.to/2E8LNgq
Venom amzn.to/2DSAauw
Spray Bottles amzn.to/2GLolEa
Mothers Polish amzn.to/2FGYbkI
Sand Paper Kit amzn.to/2nWAFJe
303 UV amzn.to/2p7q9zH
_____________________________________________
Camera Used for Germany videos
amzn.to/2IOESac
Deutschland Tools:
Dewalt Drill amzn.to/2SGMEbA
Dremel Tool amzn.to/2B3bHyE
Mothers Metal Polish amzn.to/2H3r0JN
Eagle Wadding amzn.to/2C56RSU
Mothers Polishing Ball amzn.to/2Qp20F6
Drill Extensions amzn.to/2LfiSZe
Polishing Kit amzn.to/2PxQ1jl
Microfiber Towels amzn.to/2nX4864
Venom amzn.to/2nSJZi4
Spray bottle amzn.to/2EexFyV
Sand Paper amzn.to/2EgPlhh
303 UV amzn.to/2KL1Il5
Disclaimer:
Due to factors beyond the control of SWEET SCOOTS, we cannot guarantee against the improper use or unauthorized modifications of this information. SWEET SCOOTS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET SCOOTS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET SCOOTS, no information contained on this TH-cam channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET SCOOTS - ยานยนต์และพาหนะ
*****Hello Our Great fellow riders, here is the start to making this oldie a goodie again. Hope it helps load your memory banks up. We were thinking someday we will put together the SWEET SCOOTS bike rally, you never know it could be bigger than Sturgis LOL Have a great day and ride safe and polish often*****
Years back someone I knew had their Z900 engine blasted with corn husks. The finish was almost like chrome plate. They clean and polish but don't scrape. They're might be better mediums nowadays. But 40 years back corn husks were amazing..
That's awesome and it works if you are removing the motor from the frame to polish...thanks for sharing, Mad Mike
I think that was ground-up corn cobs. 😎
Thanks for making this video. I've recently bought myself a 1974 Honda CB K4 750/4 & am going to polish the alloy. You have given me everything I need to know to do that.
Much appreciated 👍
Cheer's
Thank you Robert glad we could help you have a great day
I like to use lacquer thinner or acetone, then a medium scuff pad to a fine to get rid of the clear finish then the oxidation before attempting to actually polish.
thanks for sharing and helping the channel my friend, ride safe...mad mike
Just found your video while searching for resto ideas on bikes.
We just picked up an 07 Vulcan project bike yesterday. Poor thing sat in the elements for 3 years, was dumped & generally neglected. It's going to get Drifted!
The aluminum is badly pitted & I've been polishing by hand.
Tomorrow, I'm going buffer shopping for these gadgets!
Thanks for the great info!
Absolutely Tanyac! Glad we could help!! Thanks so much for watching and sharing, hope you have a great week and all the best on bringing that 07 back to life my friend. mad Mike
Wow. New subscriber to this channel too lol.
I'm restoring a 1983 Nighthawk 650 and this is just what the doctor ordered!
glad to have you with is my fellow rider mike
I'm doing almost same with my 81 XT250 WITH 1000 ORIG.MILES RUNS LIKE A CHAMP ..THANKS FOR RHE TIPS WHATA SEE THE JUG WORK N WHAT UR USEING
Great video. I want to start restoring my 93 FZR 600. It has only 10000 miles on it, but the fairing and the fins need some restoring. Thankyou for giving me some tips on how to start.
Our pleasure Neil! Thank you for watching and sharing, have a fantastic week and all the best on your project my friend. mad Mike Sweet Scoots
Great video!
I miss my bike, still recovering from the accident that totalled it.😭
Claude very sad to hear that my friend ...get well soon :) mike
Good idea to pass the time here in Maine. Cant wait to get out and ride. Have a couple of dirt bikes to clean up, Thanks
raychee you got it now is the time most bikers are busy detailing and working on their bikes :)
Try a area using aluminum aircraft stripper, then polish it. Those engines are painted and clear coated from the factory, the comprised finish is what looks bad. Using polish and friction to get the old finish off is time consuming.
What you are ending up with does look great though. Thanks!
Edward thanks for that if it was the summertime here in mich we would have done that but we are in an enclosed area and that option is out for us ...the clear looks really deteriorated so it should sand off real easily my friend ...thanks brother mike
@@SweetScoots I hear that... I'm in MI too, sitting in a warm house watching TH-cam!!
Edward Malfroid there you go now that's how you deal with old man winter :)mike
Doing an old bike throughout the winter would be a great way to get through the cold weather.turn on the music and work while watching the bike transform into a shiny piece that you did with your hands.
Great video mike.keep them coming
George thank you very much my brother and you are very right as it is quite relaxing to do in your own comfortable surroundings ...mike
Wow... absolutely amazing, I'm gonna do this to my bandit.
You will love the results Darren! Thanks for the view and comment, have a great week and all the best on your project my friend. mad Mike
My honda has a failing factory clear coat over some of the engine cases. What should I use to remove the clear coat?
Use this, takes 2 or more applications and it will remove the clear coat amzn.to/3ttY5rE just make sure you let it sit overnight after each application. You can also use this amzn.to/3hNLBIE and remove it manually. Thank you for watching and asking Dustin, all the best on your project my friend. mad Mike
Great Job on the clip , hope in the next one you show how to clean up the fins , thanks again , cheers
thanks Tony and we will be doing that video soon Sweet Scoots Mike
I was just about to order some brass wheels and scotchbrite wheels for dremmel... so its recommended to use the white polishing discs/rods to clean an engine instead? My engine casing is 15 years old!
you can try the item you have and if you dont like the results you can use what we share in the video my friend
loving your video's its like your talking to me personally Do you have a video on cleaning the small buffing wheels? I am getting close to retirement age and I'm trying to teach myself motorcycle detailing as my next adventure in life.
We just use a small flat screwdriver, spin the wheel slowly and touch the screwdriver to it until all foreign matter is removed. Hope this helps James, thanks for watching. mad Mike the hammer Sweet Scoots
Hello Sweet scoot, excellent video & very helpful, just purchased a Ducati Monster 20 years old & runs sweetly but just needs a bit of TLC on the ali to give her a bit of bling. Just Subscribed. Happy riding. 😀
Glad it helped Mark! Thank you for being here with us, we are finally getting all settled from our move to FL and will be getting back in the swing here on Sweet Scoots! Welcome to the fam my friend. Have a great day. mad Mike the hammer Sweet Scoots
This is a FANTASTIC video. I was given an '86 Vulcan and need to do this to the engine. You mentioned another video to deal with heads and fins. Did you ever do that one? Also, what about sanding the large surfaces? Was there a video for that too?
yes we did that video th-cam.com/video/FP7HVFRPfXY/w-d-xo.html if you dont repaint then just use the technique for the sanding of the fins
Will mothers take off yellowed clear on casings/handlebars that are aluminum?
mothers is amazing so give it a try and see if you like the results...if it doesn't work then the items are clear coated and have yellowed you will need to remove the clearcoat to get to the aluminum to polish it...
yes it will if it is not yellowed clear coat..thanks mike
Im about to attempt this on a 1952 Honda Dream E-type engine. I just hope there's a way to make it look somewhere between corroded, and mirror finish; I'm not looking for a mirror finish as thats not how it was, but want to remove all the corrosion.
leeroy to gain the effect you are looking for you will most likely pass on doing complete polishing and stop where you find the finish you are looking for my friend. Also, if you like detailing your car or truck see our other channel Sweet Project Cars thanks Sweet Scoots Mike
Did you ever make additional videos of this project?
cap we are working on it my friend
Bro,u r a life saver♥️
Awesome, glad to help brother. Thank you for watching and commenting, have a great week. mad Mike sweet scoots
i'm working on a 1983 GPZ 1100. i owned this yamaha, the engine cams went flat.
that sounds like a great project
believe it or not havent turned on a tv in 5 years . I do fill in some time on educational TH-cam videos like this
Good for you!! I watch a documentary here and there but I'm like you, I don't watch a lot myself, it's all crap anymore. Thanks for the view Mark, have a great week my friend. mad Mike
What grit polisher pad can I use to polish the left handed smoke shifter?
10 grit, that should really make that smoke shifter shine :) LOL Thanks for watching. mad Mike the hammer Sweet Scoots
is there a part 2 to this showing the sanding process to remove the corrosion?
matt part 2 is coming my friend mike
@@SweetScoots any word of how to get those engine fins looking good as you mentioned? without just spraying them.
I like your philosophy. The world is moved by people like you.
Raul thank you very much my friend! Mad mike
You have dam good ideas.
Thanks man!! I'm always looking to solve a problem and then I share it with others. Thank you for the view and comment, hope you have a great week my friend. mad Mike
Where are the next videos? Can’t find them.
We gave you a great start and the tools needed to start the job, just continue on with what we've shown here. The reason we did not finish the series, we had a collector that saw the bike and offered us an obscene amount for it, so she's gone my friend :) Stay tuned Eric, we have more to come, thanks for watching. mad Mike Sweet Scoots
I've use mother's, never dull, col brassey, and wizards none of them are that impressive!!!
Thanks for watching and sharing redreeler, hope you have a great day my friend. mad Mike Sweet Scoots
and once polished? heat clear coat? thanks
You can't clear coat it, you just have to keep up on it especially on the jugs, sorry. Thanks for watching and asking, have a great week my friend. mad Mike
OMG I know this voice, subscribed.
Thank you very much, we truly appreciate it. Have a great day. mad Mike SweetScoots
now that's one damn sweet video! i got my first bike today (Yamaha Virago) and I'd like to get it very shiny for that first ride! :-)
thank you D H this process is tedious but will make that Virago Shine like a new Dime
Where did you purchase “ the covering for the shaft “ ?
deb this is how you get the shaft..no pun intended... amzn.to/3KmcmfS Sweet Scoots
I wish this video had been around when I had my '78 750 Special.
Fancy meeting you here! I’m definitely going to use this technique on my 79 XS750!
Good idea 🔥🔥
Glad you think so! Thanks for watching and commenting, have a great weekend my friend. mad Mike Sweet Scoots
@@SweetScoots same 2 you bro ❤️ have a nice day
Did you ever do the fins??
We are actually in the works doing a video on that, you're going to love it Ricky! Stay tuned. Thanks for watching and asking, have a great day my friend. mad Mike Sweet Scoots
Merry Christmas
cigarcaptaint thank you very much Mike
what about using harpic on alloy? what your thorts?
Michael you can use what you think may work we only show what has worked for us for the last 20 years or so detailing bikes thanks Sweet Scoots Mike
Yeah have to get some tools to get the job done or just leave the patina and ride the bike
ya that works as well Mike...thanks for the great comment Mike Sweet Scoots
Isn't there a paint stripper that will remove the clear lacquer first and make it easier to polish the cases ? That lacquer is a bitch to remove sometimes.
Try this amzn.to/3XWNJ1Q and see how it works for you. Thanks for the view, we really appreciate it, have a great week and all the best on your project my friend. mad Mike
Hi can you show how you polish cylinder fins?
we sure can
@@SweetScoots did you ever polish the cylinder heads. Thanks
If you wet sand it with 2000 then 3000 it will get your pits out then polish it.
Thank you for sharing we appreciate that
Thanks! Doing my 87 rebel 450 today ❤️ I appreciate your video to help me along the way
good deal glad we could help...:)
I owned one love that bike till I sold it and left for the army now I rode a 1800vtx
Nice! Thank you for watching and sharing MJ, also, thank you for your service my friend, you are appreciated. Have a fantastic day. mad Mike the hammer SPC
Don’t go over 600 grit on aluminum it makes the surface too smooth and the polish doesn’t like to bond as well with the metal leaving less of a shine unless you reallllly work the hell out of it
Hey Zack see this new video no sandpaper needed Chrome
th-cam.com/video/ttePFxTKjgA/w-d-xo.html
Motherly love :)
it feels like that lol
My $800 bike ended up being 3500 to restore myself. There is no money in this shit lol
I beg to differ, when you've been working on bikes for over 35 years, you get good at re-conditioning. Out of 248 bikes we have re-conditioned we had a total of 748,000 invested into them and after re-conditioning, we profited 427,000. Thanks, have a great day. mad Mike
Could you put 'clearcoat' over the finish ? If not then you would be polishing a lot !
joe you can they do make a high temp clear the only part clear will not work is the heads and jugs
Do a video about bikes engines and all bikes common components . PLEASE .
EA Jam ok that is a huge amount of info there..can you narrow it down to what kind of info video you are looking for thanks mike
@@SweetScoots just a preaf details about engine components of a bikes engines .
@@SweetScoots for example does bikes have gearbox ? Does they have a throttle body ? Are they air cooled or water cooled ? Do they have a cooling fan ?
EA Jam good deal we will see what we can do ...what bike are you riding now? thanks, Mike
@@SweetScoots I don't have one, YET . I really wanna build one .
I wish my engine was this basic an easy to get to
jaded they can be a pain to get to for sure but where there is a will there's a way :)
What is 303?
This amzn.to/2WQg0sB it's fantastic. Thank you for asking and watching. Sorry for our late response. Have a great day. mad Mike the hammer SPC
Vapour blast... Perhaps?
Maybe we may never know my friend!!
Holy crap....clean the engine start to finish, you stop every 30 second..."I know you love your football"
Thanks and have a great day. Ride safe! mad Mike Sweet Scoots
Never showed us what you do with the fins..
zac that video is coming my friend..thanks mike
Sweet scoots?????... OMG! You've gotta' be kidding me!
we are dead serious my friend
Who knows where this world would be if people watched less TV and did more work.
Eddie G you are very correct my friend, it always feels good when you put in a good days work especially on something you love to do :) thanks mike
👍😎👍
Thank you Jerry! We appreciate the view and comment, have a fantastic day my friend. mad Mike
You are trying to buff through a factory clear coat
10/4 on that my brother we do it all the time for our customers works like a charm
Way too much work!
well we share this for the many that love to tinker with bikes and or want to do everything for themsleves thanks for your comment Sweet Scoots Mike
next time save yourself allot of work and use paint stripper to remove the clear coat off first, all alum engine cases have it.
the customer made it clear to us not to use stripper of any type..thanks for sharing my friend
Jesus this is painful to watch. Try washing the damn thing first. Let’s start there.
thank you very much for your great comment we hope you have a fantastic day my friend Sweet Scoots Mike
@@SweetScoots Ur a great guy scoots