User Manual | Eco Fuego Tech

Thank you for choosing the Eco Fuego Heater. To ensure the best performance and a long lifespan, follow these simple steps carefully.
Make sure your Eco Fuego Tech heater is properly installed and that there are no fire hazards or flammable materials nearby. Always exercise caution when using your heater, as the surface becomes hot during operation.
Ensure that the tank beneath the heater contains an adequate amount of waste oil. For proper operation of the Heater, do NOT use mixed oils with WATER, antifreeze or other dirty liquids. We recommend using: waste Motor Oil
Choose your desired setting by turning the knob to either the 8-hour extra-high heat automatic setting or a 12-hour regular high heat automatic setting. The heater will shut off automatically after these hours as a safety feature.

Step one: After choosing the desired heater setting the light will flash to remind you to clean the burner, located inside the heater. Ensure it's cleaned every day before using the heater. A weekly deep maintance cleaning by scraping the inside of the burner is necessary for proper function.
Step two: Pour your choice of igniter fuel into the burner. We recommend adding 150 milliliters of diesel fuel.
Step three: Next, ignite the burner.
Step four: Close the door.
Finally press the orange button on the control panel for 3 seconds.
From this point on, everything is automatic. The Electronic Feeding System will begin feeding the fire with used motor oil from the deposit tank below. This may take 2 to 4 minutes, depending on factors like the oil's temperature.
Now, you can enjoy a warm workshop, ensuring optimal performance for your tasks.
Thank you for choosing the Eco Fuego Heater. Stay warm, work efficiently, and experience the difference.
For more information visit www.ecofuegotech.com
#ecofuegotech