Hey everyone! Welcome back to another Thursday video melting and creating some fun stuff. I hope you all enjoy this and stay tuned for a lot more coming soon 👍🏻
Love the video as always. Been thinking about melting some aluminum pans haven't found any videos on it so is it a viable source for aluminum? They are easy to get and can add up on weight any input to this
Those turned out great, always love your casting!! Would be really cool to cast a pair in copper and brass too, have a display with the 3 metals. See you next week!!
They look like Mortal Kombat's Scorpion weapon. GET OVER HERE!! lol. Throw a connecting chain in the holes and bam it's there. Either way they came out looking dope. Thanks for the cool video dude.
As always Adam. Very high value content. Too bad I dont have time to edit my videos and publish them every week like you do. But I have managed to edit and I'll publish a special one for Valentines day :)
Hahaha hell of a key fob! Perfect pour bruv but I saw that hesitation where you were thinking of pouring a bit more to make sure. But that was smooth as butta brutha. Thx for the time and skill. Slainte
You done a good job like always, nicely done bro. Hey can you make some Ninja Stars with some wicked skulls in the middle? I think they would look awesome.
ADAM THOSE ARE JUST FREAKING AWESOME. Got a vary nice point on them i bought my sister 1 of those a black 1 few years back but not as good as yours tho lol👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦
Hey bud. I was hoping you could help. I've been attempting to cast a 3-D hand of my son and I've found it to be very difficult. The best method I've found is buying the quick set powder stuff that starts pink and turns white and hard. Then I fill that void with molten wax. Then I remove the "rubber" stuff from the wax "casting". Then I make the mold with sand and used the wax hand to make the final mold. Then once hard I melt out the wax. We're using tin. But with so many transfers from material to material the final casting isn't as detailed as we'd like. Do you know of any material that can withstand tin temps and still capture the detail? Or can you think of a better way because this is the best I've worked out so far. Thanks for your time.
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Hey everyone! Welcome back to another Thursday video melting and creating some fun stuff. I hope you all enjoy this and stay tuned for a lot more coming soon 👍🏻
Sick make today Adam!!! Love Em!!!!!!
Nice
Those came out really smooth brother 🤜🏻🤛🏻
Love the video as always. Been thinking about melting some aluminum pans haven't found any videos on it so is it a viable source for aluminum? They are easy to get and can add up on weight any input to this
Man, those came out of the sand PERFECT! They turned out amazing! Great job dude. 👍👍👍
Well done. Great idea for a useful item. You do really well not only with form but also function. I'm always ready for your new vids. Keep em coming.
I love when you make things you can use. Great video
Those came out perfect !
Very nice job .. aluminum is harder to polish up then a lot of people think 👊🏻
Dude I could watch you work for hours! You are so talented & creative!
I m from India I m your biggest fan love you❤❤❤😘😘
Awesome job !!! 👍😁
Always cool to watch these things being made
Good job......my sand casting hero...as always, love to watch you sand cast.
Nice pour your making sand casting look easy! Learning loads thanks.
Those turned out great, always love your casting!! Would be really cool to cast a pair in copper and brass too, have a display with the 3 metals. See you next week!!
Those look sweet brother 👍
Just what I need in The Bronx.
Brother you're so awesome! I love all the vids you do, YOU are a master of your art sir!
Seeing the Harley Davidson (bar & shield) logo cast in copper or maybe bronze would put a huge 😁 on my face.
You toss all the prep tools onto the floor except the Wreck it Ralph hammer. 😆
Awesome video love those
You know when its a good day because the gloves don't rip :D
We haven't seen the sun in 5 days. West Virginia
You might need those if things get worse! Cool melt
Cool art
Cracking bit of work mate those things look awesome I bet they were deadly when used..see you next week 🍺😊👍 punk rock KEV ☮️☯️🏴☠️🏴☠️🏴🏴🏴💣💣💥🔥💥🍺😎🤟
Nice job
They look like Mortal Kombat's Scorpion weapon. GET OVER HERE!! lol. Throw a connecting chain in the holes and bam it's there. Either way they came out looking dope. Thanks for the cool video dude.
As always Adam. Very high value content. Too bad I dont have time to edit my videos and publish them every week like you do. But I have managed to edit and I'll publish a special one for Valentines day :)
Should’ve made one in tin too nice work
Hahaha hell of a key fob! Perfect pour bruv but I saw that hesitation where you were thinking of pouring a bit more to make sure. But that was smooth as butta brutha. Thx for the time and skill. Slainte
this is so damn satisfying!!
Awesome, just awesome. I always wondered which casting method you prefer. Sand or plaster?
Those Kubotan's look lethal kind of thing you would take to a knife fight.
Cool man.
Awesome
Who came first you or bigstacked almost indistinguishable apart from cool dogs.
Мне понравилось лайк жду следущего видоса лайк
Nice!!! Is there any reason for casting the holes at all? Would it be stronger to cast whole then drill? Or doesn't make a difference?
Be safe
You done a good job like always, nicely done bro. Hey can you make some Ninja Stars with some wicked skulls in the middle? I think they would look awesome.
When you do your 3d printing oh do you split it in half for the sand casting
Yes I do 👍🏻
I ment to say how do you split it in half
Those'll end an argument!
ADAM THOSE ARE JUST FREAKING AWESOME. Got a vary nice point on them i bought my sister 1 of those a black 1 few years back but not as good as yours tho lol👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦
Still love your vids but also still waiting for that German jellystick grenade dude hope to see it and u soon.
Is your positve item made on 3D printer? Great video. Where are you, looks like Ca or Az?Thanks for sharing.
Yes it is... Vegas 👍🏻
@@ArtByAdrock Thought so I saw the trees and roofs.
hejka Siemka łapka i ogladam
9:07 that looks kind of menacing... I'll bet that could take your thumbnail off in a hurry.
I appreciate u bro if i in usa i’ll help i have a lot materials
If you cast those in brass you can peen the entire surface causing it to work-harden (it'll leave a nice texture too)
Out of curiosity: at the bottom of the ingot, what causes it to sink or indent in the middle?
can you form some sort of rudimentary lathe? lol Movie quote, but would be excellent for removing the flash and polishing.
if your looking for a new project, maybe some Cubits from the original battlestar galactica ???, in nordic gold
Where do you get your petrobond?
Ye olde yellow bucket 😊
Hey Adrock, are you still selling your big ingot molds? I wanted to buy one, but couldn't :(
Hey bud. I was hoping you could help. I've been attempting to cast a 3-D hand of my son and I've found it to be very difficult. The best method I've found is buying the quick set powder stuff that starts pink and turns white and hard. Then I fill that void with molten wax. Then I remove the "rubber" stuff from the wax "casting". Then I make the mold with sand and used the wax hand to make the final mold. Then once hard I melt out the wax. We're using tin. But with so many transfers from material to material the final casting isn't as detailed as we'd like. Do you know of any material that can withstand tin temps and still capture the detail? Or can you think of a better way because this is the best I've worked out so far. Thanks for your time.
You’ll want to use investment plaster and then melt out the wax. Sand casting won’t produce the results you want. 👍🏻 hope that helps
@@ArtByAdrock On it. Thanks man
why do you always preheat the molds?
Is it my imagination or is petrobond sand sticking better than greensand?
Craftsman
Nice job. Can you send those to me? 😄😄😄
Sure can 👍🏻 I’ll make you a golden pair 😉
@@ArtByAdrock 😄
Alumatube dose this and seen big StackD casting do this to
don't waste your time with alumitube, he is a dick. he totally ripped off BigD & Art
O well ok
And i have jewelry for my grandma 👵 she told me don’t want it it’s all for me now
Can you make me some spikes if I give you the dimensions? I need them for my low rider car.
I just wanted to be the first comment
Dam* I need to say something to impress uu copper sh*t
Hey
Your White balance is really off