How to rebuild John Deere Ztrak deck spindles. Z915, Z920, Z930. TCA24880 Spindle
ฝัง
- เผยแพร่เมื่อ 12 พ.ย. 2022
- I this video I show you how to easily rebuild your Ztracks deck spindles for under $25 each vs buying a new one for $200 ea.
Here is where you can find the bearings and seals for the TCA24880 spindle as shown in this video.
www.amazon.com/Kit-John-Deere...
I hope this video is helpful and saves you money. I many other videos you may find helpful. Subscribe to the channel and stay tuned for more.
Join my Patreon page to support the channel and help me bring you guys more and better videos. patreon.com/user?u=82342066&u...
🍻🇺🇸 - ยานยนต์และพาหนะ
To find tools, shop equipment, mower parts and more, you can find them at my store. Click this link: www.amazon.com/shop/mechanicalmind
I'll get a commission on the sale at no extra cost to you. It's a great way to help the channel and get the items you need.
17:55 not sure if this is only on the new cast iron spindles but mine have a pressure release valve so I grease till the valve pops out and oozes excess grease out the top of the spindle. It’s a great feature since you can’t blow out the seals with grease.
The valves are sometimes put in bad spots on the backside of the spindle under the pulley so you have to take your time cleaning. It can get grease under the pulley so make sure you wipe under it or it will sling the grease everywhere the first time you start the deck.
Great information and video
Keep them coming with more for us to know
Thanks, will do! Thanks for watching! 🍻
13:30 I’ve used evaporust and it’s great for rusty things. It does change the color of the metal to black wherever the rust is or exposed metal.
Hey just bought a 920 M couple of months ago love the way it mows I think I have watched every video you put out. Your video help a lot learning the 900 series I always liked John Deere first 900 big difference what I have been use to
Perfect timing! I had planned to do a Spindle check/replace this winter anyways on my z930m. I had heard from another channel that you can google the numbers on the bearings and reorder from Napa or whoever sells them. Much cheaper option. 👍Thanks again!
Thank You again for information and advice
Great job on the spindle rebuild on this mower
Thanks for taking the time to make this. Helped me out!
Great video those are just like my spindles
If you pause at 7:32 you can see that bearing marking “6208” that’s a standardized number for identifying that bearing. You can use that number to get the same bearing from any manufacture.
I just ordered 50 to start the year off with and will use them easily in a month
I see 6205 bearings even clicking on link in description of hd switch says 6205
thanks they are the same
Around 21 they changed to cast iron spindles that’s when my z920m was built and has cast iron ones.
Yes. For example if you have a z930m with a PIN # over 90,000 it requires the cast iron housing spindle AUC12478. The process is exactly the same. The bearings and seal part #s different. But done the exact same way. Models before -90,000 will have the TCA24880 spindle.
Do you know what bearing for a 2006, 757 60 inch deck
Does it have a low oil shut down ??
What color is the wire to it ??
I’m thinking yellow
👍👍
Is the process the same for cast iron spindles like these aluminum ones?
Yes exact same process just different set of bearings and seals needed. Other than that they are pretty much identical
I've got a z740R, purchased new in 2021. Question: How much grease do I put in each of the spindles? Typically I'd expect grease to be oozing out somewhere when 'full' but after 70 pumps of the grease gun i don't see anything oozing out anywhere yet. Ideas? Note the spindles look similar to what's in the video.
Hi Jim, I use a hand lever pump and usually stop when feel some resistance after pumping grease into them. Which is usually 8-14 pumps or so. You want to try to avoid pushing grease out of the seals.
@@Mechanical_Mind thanks for the quick response.
I bet jd is watching you tell the weak point and the truth
But it’s what makes a good mechanic
Yes I’m retired diesel mechanic of 58 years and still working on small engines
Grease is what all the new equipment is needing badly and zert installed
How many hours are we getting on a set of bearings before needing repair?
From what I see the average is around 500 hours on a set of spindles assuming they are being greased properly
currently unavailable on Amazon, any other suppliers? thanks
I'll see what I can find
I ordered them every Dec
That’s why I ordered a hundred at a time
Think ahead Sir
How many hours do you see the spindles lasting before needing a rebuild?
That really depends on how often the owners have greased the spindles. Ive seen them go bad as years as 150 hrs amd seen them last as long as 1000 hours.
Best to remove them while new and remove covers
Pack with grease
I'm at 2300hrs on original spindles
will this kit work on the 915b 54 inch cut
Hey Phillip, go to deere.com then click 'parts & service' then 'parts' then 'commercial mowing'. Then enter your mowers PIN # ( product Identification Number). Confirm your mower has the TCA24880 spindles. The kit in this video is for the TCA24880 spindles.
well, well, Troy.....Shirley saw you on Facebook, let Shirley know how I can call you! Dan
I would be weary of buying cheap bearings, I’d go with name brand bearings.
I’ve had issues with cheap wheel bearings on cars and cheap garden cart tires.
I fully agree. I think the stock factory issue bearings are cheap chinese bearings 😒
@@Mechanical_Mind yea, they know it should last long enough for warranty. After that they don’t care since your gonna probably come crawling back to them for parts so they get you twice.
If you get a few years out of some $21 bearings and seals heck why not. Its really easy to change them out. Regardless they need to be greased regularly.
@@Mechanical_Mind absolutely, it’s just a pain if you get a bad batch of bearings and have to do hours of work and out hundreds. This happened to us when we put on new MOOG iwe wheel hubs on our f150. It took 2 sets of them before we got a decent one and after the last one failed again I bought the ford one and called it a day. I’ve been bitten to many times on cheap or aftermarket parts. I had another fiasco with thermostats being defective right out the gate. The thing was both the wheel hubs and the water pumps were both name brand products…
Really I’ve tryed them all and the cheap brging last just as long if if if grease often
Troubleshot my Z930M drive as per your video. My right hand drive is worn out. I can’t understand why I religiously change the fluid and filters. My timer is 625 hrs of home use only. Can you point me to a manufacturer to buy a new drive unit. JD wants $2,000. Thanks for your time.
Is it not still under warranty? Give me its PIN# and. I can check if its under warranty. Did you check to see if the top pulley is just spinning on the hydro shaft?
The machine is about 7 years old so I’m sure it’s out of warranty. The problem starts after about 35 minutes of mowing.
If you buy from HD Switch be forewarned. They don’t respond if there is a problem with your order. They shipped me the wrong bearings and seals for my 60D deck and I can’t reach them to return. My bad, I just have to eat the purchase price. Now I have a bearing and seal set that I can’t use.
you want Japanese bearings
I would never own a JD
Years ago wheel bearing on cars were a regular maintain ence item. Disassemble, clean and grease bearing then reassemble.
Deck bearings should have been the same.no pets needed.
Today's throw away society is a total waste.
To shows of no care for anything, even the planet.