Smith & Wesson Factory Procedure for Disassembling a Revolver
ฝัง
- เผยแพร่เมื่อ 5 มี.ค. 2023
- Forget the other instructions and expensive tools you have seen, because only a Smith & Wesson factory trained Armorer has learned the correct procedure that will ensure that your valued gun is not damaged. With nothing more than a screwdriver, disassembly is quick and easy, and reassembly just as simple!
The Victory Model S&W .38 Special revolver demonstrated in this video was supplied courtesy of Mike Hashem.
Please give him a call for any interest regarding fine antique and collectible firearms and military memorabilia.
Old Post Office Antiques & Collectibles
41 Courthouse Square
P.O. Box 585
Ossipee, NH 03864
BanjoMikeHashem@aol.com
(603)539-8677 - แนวปฏิบัติและการใช้ชีวิต
I’ve been disassembling these for years and feel like I learned many new tricks after watching your video. You are a gift to the gun community
As an owner of 2 Victory revolvers and a Model 19-3 Combat Magnum, the vid's you've posted are treasure beyond measure. Thank you very, very much.
You just saved a lot of guns from being damaged. Thank you.
This is the kind of timeless expert information TH-cam was made for. Thank you, Sir... And heres to all the fine craftsman of this country! 🏆
I am thrilled to have found this by chance. Once he started talking about the screwdriver, I knew I should listen up.
Great information for us revolver folks. Thanks.
We're watching the master at work. These videos are priceless. Thanks Gunblue!
This man has 163k subscribers. If just a quarter or third would donate just a dollar or more a month to his Patreon it would go a long ways to helping Gunblue. You can’t put a price on this man’s knowledge. A true treasure.
Mike you are a wonderment few are left Thank you kitchen table im back shove over dear wife
I’m a big revolver person, and really appreciate you, and the channel ❤🇺🇸🇺🇸🇺🇸
I’m 24 years old and I had the honor of inheriting my great grandfathers S&W Model 13-1, produced late 1976-1977. It’s become my favorite revolver to shoot and carry! Thank you for your straightforward and informative video sir. I know how to clean Beretta 92s and Glocks, but revolvers are relatively new to me still. Happy shooting brother🤘🏻.
I was an Air Force CATM Instructor. This was the exact same way they taught us in Tech School back in 1980 to work on our M-15's.
Excellent presentation. I did warranty work for S&W as a licensed gunsmith in New York City. I took the armorers courses at S&W for both revolvers and pistols and still have the manuals. It was and is a responsibility I take very seriously. Your description is exactly as it was taught.
I just want to echo all the previous comments of appreciation sir. Anyone who owns a S&W revolver (especially the older models) understand how important it is to take extreme care when disassembling and reassembling the firearm. Thank you!
Thank you! I just inherited two S&Ws, one from 1945 and another from 1952. While I don't want to have to open up either one, it's amazing to see an expert do it!
Oh shit! Your camera quality is excellent. I haven’t been here in a while. Thank you for taking the time to educate us. Without people like you, jewels of information like this would be hard to find.
I saw your original S&W video and have used many of the techniques you taught there. This is a great addition to that first video. Thanks.
Excellent. People who were gunsmiths at the old factories, manufacturing guns the old way, not this modern profit only driven LEAN process need to put their skills l on the internet, lest they be forgotten forever. I wanna see guys from the New Haven Marlin factory talk about their processes.
We definitely need to preserve the old ways. It took a long time to develop skills, and they should not ever be forgotten. It should be done for guns, and lots of other crafts and skills also.
That's how I learned the correct way to disassemble and reassemble any Smith & Wesson revolver
Between you and Jerry Kuhnhausen's S&W books I've learned a LOT, Thank you!
Hi Gunblue, Much appreciate the tutorials about revolvers. I have watched all your revolver videos including your handloading videos. plus many others. I am a 38 / 357 revolver fan and figured out how to disassemble with your prior video shown with the S&W 45 Long Colt, and whether or not to buy a new Model 19 which I did, including 686 4" & 6", 586 4", 27 6.5", 627 for USPSA and Steel plus the new 3", 4" and 6" Colt Pythons. My Uncle was a retired Des Moines Police Officer and imagine you and he are similar in age. He gave me his service revolver 19-3 which I still have, had it repaired twice by Smith & Wesson for end shake and gas seal on the cylinder. I no longer shoot full house 357 with that gun - it runs fine on 38 Spl. The new guns get the 357. We were bow hunting and fishing buddies since I was a child until he passed. Anyway, your voice and vernacular reminds me of him.
1. Will you please show more tutorials how to repair commons problems for S&W revolvers i.e, sear, hand, proper end shake corrections, etc. I know you've commented that you cannot, but learning from a trained armorer would be most valued. The only other reputable source I can find is the Kuhnhausen Shop Manual.
2. Can you show correct methods for smoothing out the trigger pull weight that will not decrease reliability for S&W revolvers?
3. Anything you can teach about Colt Revolvers - Pythons?
4. Anything to teach for more accurate handloads for 38 Spl / 357 for plated, cast, jacketed, coated bullets for hunting and competition use?
I have a Victory revolver in beautiful condition and I thank you for sharing your knowledge.
Boy. I have learned a bunch of good tips watching your video, It's great. Thank You for caring enough to post this instruction!
Thank you Captain, you taught us all an amazing skill. I would have never realized this could be done with just a re-tooled screwdriver.
Recently my model 10 trigger is extremely stiff, I have to open it to see what's going on inside. Your video is so helpful!
I don't even own a revolver and yet I'm fascinated watching this man with his craft. What a blessing you are, sir.
Thank you very much for this video. How simple you make it seem.
This sir is such valuable information to maintain and preserve our investments in the SMITH & WESSON revolvers. Thank you so much. I remember watching the armorer for The Oklahoma City Police Department do the disassembly and assembly, just as you have demonstrated here. That was back in about 1972, I had a new Model 28 Highway Patrolman 6" and a set of target trigger and hammer for it. Things were a lot different back then and he had invited myself and a buddy to bring our pistols to the police range where he had his gunsmith shop. I still have that model 28 and enjoy target shooting with it in spite of my old eyesight. Again much obliged for the excellent and detailed instruction, which I have found nowhere else other than your channel. God bless you and yours sir.
That simplified that so much for me
If I had a Smith and Wesson, I would try this out. Had a relative bring me a Taurus .22 revolver to get working, and opened up the frame, and there was a hard gunk in there, that was binding it all up. Got it cleaned up and lubricated, and the difference was amazing. I don't think it ever worked that well for them before. I always seem to find that there are always special tools that you have to keep on hand for all sorts of items to get things assembled and disassembled with less trouble.
Very helpful vid. Been reluctant to disassemble my model 19.
Thanks for passing on part of the craft!
Sir you are a treasure. Greatly enjoy all your videos!
Always informative and entertaining too! Thanks again for making the effort and sharing.
I first thought this was another boring video but the patina on to ol victory was beautiful but the more I watched the more I listened and the more I listened the more I learned very informative and well said thank you probably never do this but it was a pleasure watching you
Thee best video I’ve seen to date on how to correctly disassemble the Model 10, Victory models, and their variants. Thank you for sharing your knowledge with us! Your legacy continues!
Excellent video with solid information. Thank you, sir!
Thanks a lot. I've only done one, a five screw from 1947. For unknown reasons I had to reassemble it four times before the hammer would fall freely with all the screws snugged down. Now it works great, but I still don't know what went wrong the first three times.
Great information, love your channel, God bless.
colorado school of trades offered an armorers course through Smith and Wesson when i went about a decade and a half ago. wish i coulda afforded it, but our design and function class on it was pretty comprehensive on it's own. appreciate the video, it's a great refresher!
Thank you VERY much for the exalent tutorial! The Victory model that I inherited from my father, was a "Leand-Lease" gun, that left the factory in .38 S&W, and was sent to England, converted by the firm of "Cogswell & Harrison" to .38 Special, and apparently sent back to the R. C. M. P. My father bought it at a local gun shop, in our home town, when he took a part-time job as a night watchman, in the '60s. It has the 3 inch barrel, is still a good shooter!
I know I'm late but I have the same gun you have and was wondering how it got like it is. 3in barrel and rechamberd in 38.special.The sight has been reshaped but it shoots to point of aim with all ammo but the strange thing is that it has virtually no wear mechanically.
I ran into Mike today at Tractor Supply, he said he'd bought a nice private collection of antique firearms.
Thank you for the great information. Loved it.
THANK YOU VERY MUCH for this great video!!! I especially appreciate your comments and instruction on proper screwdriver design and use. I have number of S&W revolvers, and i now feel much more comfortable with their care.
I had a K frame sitting around for years that was given to me disassembled. I finally got it reassembled thanks to you!
I just watched the baked beans vid… now, back to weapons!
Or to the kitchen!
Awsome video. Wasn't looking for this but it was very helpful. I have some old s&w revolvers from my dad that I would guess have never been apart, and cleaned / oiled inside.
Thank you GunBlue for this detailed video. I feel much more confident about disassembling my revolvers after viewing it and I will take great care, as you instruct, in the process. Many thanks.
Glad I found this. I just picked up a 32-20 1905 4th change that has a lot of the bluing gone that I'm thinking of rebluing.
I have 2 S&W revolvers (.22 and .357) and I think they are awesome! But the challenge has been how to properly dismantle them for cleaning etc. After having seen this video I know how to do it. Thousand thanks🤗 and greetings from Finland🇫🇮
Fantastic. Thank you sir.
Fascinating. I have never tried dissemble my 1979 vintage model 66 or my 5 year old 642 air weight. Both need a good cleaning. Thank you
Thanks for the video. Sold off all my S&Ws, but this works for Taurus and Rossi, probably others. Some nice tips.
Splendid. Thanks Chief.
Wow, I have the first video from a few years ago and I love it. So cool. I have a lot of S&W revolvers
I'm thinking about cooking baked beans!
Well done!
Nicely done, Sir!
You are definitely a wealth of information...like the gunsmithing version of Paul Harrell. I haven't needed to go inside a S&W yet, so this will be helpful when that day comes. Thank you!
Much thanks for the knowledge sir
I'm not rich, but I'm sending my 5 dollar lunch money for that video. I actually learned something.
Excellent Video!!
Thank you for sharing your knowledge with us.
Saw this video when it first came out. Now I'm coming back because I bought my first Smith and Wesson. Model 60-18 from a pawnshop. Being a rare model I would like to make sure I come to a professional
When I took the armourer's course, they had us work exclusively on stainless models. they didn't show your techniques to protect the blueing. It was also a week long course, not a two week course. We assembled 3 revolvers and, of course, the third one was actually pretty good. I took the course in 85.
S&W was under some serious stress in 1985, which I believe translated to how they reevaluated their Armorer's training. Our second week was devoted to repairing racks of production guns that QC had pulled. It was good training, but cops aren't stupid. We were free labor, and departments were quite upset that they were funding a week of motel, meals, and loss of a paid employee to perform repair work.
Ruger's introduction of the GP100 was taking a very deep bite into their law enforcement sales, and departments had become quite dissatisfied with the fact that armorers training was an excuse for poor quality and lack of factory support. Those issues, combined with having no viable product for the looming autoloading trend was kicking them out of their law enforcement monopoly.
I received a shipment of 35 2" barrel round butt Model 10s in 1982 that had been boxed in completely inoperable condition, having never been strapped up or fitted. Their response over the phone to me was "that's why we trained you to be an armorer for free". S&W didn't get very far with their complaints when our next major purchase three years later specified the GP100, as many other departments were doing.
@@GunBlue490 That's a really cool anecdote. I may write this down.
@@GunBlue490 This was my first experience working on firearms. It became invaluable later on in my career in forensics. Things like how to properly use hand tools, file flat, work on the cheap part etc. I eventually took field armour's courses from Ruger, Beretta, and Sig-Sauer. None of them came close to the S&W one. The only interesting experience was the Sig-Sauer one. After a couple of days of instruction, each student went to the front of the class with a cardboard box and had to select every part required to assemble a fully function SA pistol from a big box with all the parts for several pistols. The Ruger course showed how you a modern functional reliable revolver with almost no hand fitting required could be made. By the time I took the S&W revolver course, the switch police forces were looking at SA pistols and the days of the revolver as a sidearm were numbered. But by far the greatest thing with my S&W course were the American characters we met and befriended. There were Seals, Wildlife Enforcement Officers and surprisingly only 4 policemen from all over the US.
Great video. Thanks
great info!
Excellent as always, thanks
Thanks for sharing!
This was excellent and helped me so much. Greatly appreciated, sir!
Thank you sir. Wheel guns are a lost art. You give us handy folks the ability to maintain the tools we use and love.
Awesome video!
Great video, thanks for sharing
PRICELESS video! Well done sir. You're a great teacher! God bless YOU!
excellent video, thank you!
Thank you uncle. greetings from Turkey
Thank you very much, for taking the time, to share your knowledge and teach others
Best youtube video I have ever seen! Thank you sir!
Fascinating to watch a master at work. Thank you!
*Thank you* for this valuable video.
Thank you for the video 👍
Señor muchas gracias ...saludos desde Argentina 🇦🇷
that was a really informative video nice work thanks .
Outstanding!!!
Fantastic video sir, thank you so much.
Great demonstration. The best I’ve seen!
Thank you for great job.
I have 3 military and police pre models and the information you have given me allows me to feel confident in talk g them apart for deep cleaning. Thank you so so very much doug
Alway's helpful information. Thank you!
Sir, I've just received two S &W revolvers and watched your video about S & W and was very impressed, so much so I shared it with my brother, and I even subscribed. Thank you 🇺🇲
Awesome video thanks for sharing love your technique I will definitely be doing it this way from now on
Thank you for your video I have that exact pistol and have been terrified about taking it apart. Now I feel confident that I can clean it😊
Thank you sir very informative 👍
Another good video. Keep'em comin
Civilian here. Respect.
Awesome video!
I wish that I had found this BEFORE I opened mine up. Now I understand the error of my ways.
This was incredibly useful for my novel research, thank you so much!
As always it was a pleasure to watch a really well made video and to learn from you.
Thank you. I've learned quite a bit from you.
Great Video! Thank you very much. Just the way Archie used to do it at our PPC shoot in the late ‘60s…
Enjoyed the video.
Very well done sir! Subscribed.