Gary THANK YOU SO MUCH for this video! My husband was able to replace our burners WITHOUT having to take the grill apart. You saved him TONS of time and frustration. Thanks again, you are a LIFESAVER! :). FYI, he was able to get the screws removed with a little WD-40 and turning the screw right and left (even though the nut head was badly deteriorated) to loosen it with a large straight slot screwdriver.
EXCELLENT VIDEO! Ordered the same parts from Amazon, was able to remove the set screws thanks to a little WD-40, and replace WITHOUT taking the whole grille apart!! Whole operation took just about 20 minutes.... Thanks again!
Thank you for this video. I have been in a leg cast and not able to take apart the grill as depicted in the instructions provided with the replacement burner tubes. I was able to easily replace my burner tubes today. Thanks again!
Those screws were a PITA. After I made the video I think the best way would probably be a screwdriver and hammer. Chisel off the side of the screw flange so the burner comes out. You can leave the center of the screw in there.
@@GaryQuiring Got it! I actually try a method of bending the edge of the tube that goes over the screw and then remove it that way without messing with the screw. i dont want to bend my new ones so il try to chizek the screw
Thank- you so very much for the great detailed instructions, so I didn't need to take the whole bbq apart! 😊 I replaced all three burners and surprisingly was able to get two of the rusted screws out with pliers. One of the burners has an orange flame, the rest are blue (as is correct) did I do something wrong?
There is no lifetime warranty on the burner tubes, it's 10 years. My grill is 12 years old. Have you actually tried to use their warranty, it takes numerous calls and is very frustrating. Not worth the hassle. www.bbb.org/us/il/palatine/profile/bbq-supplies/weber-stephen-products-llc-0654-14008294
Yes mine I over 10 years old. Just called yesterday. Sent a picture of the flame color and they are sending me new ones. They are also sending new triangular shaped covers all at no cost. Burners, grate, and the lid and bottom half are all covered in the lifetime warranty. Gave them the serial number and that’s all they needed. Was very easy process.
Gary THANK YOU SO MUCH for this video! My husband was able to replace our burners WITHOUT having to take the grill apart. You saved him TONS of time and frustration. Thanks again, you are a LIFESAVER! :).
FYI, he was able to get the screws removed with a little WD-40 and turning the screw right and left (even though the nut head was badly deteriorated) to loosen it with a large straight slot screwdriver.
Fantastic. So get those steaks on the grill!!!
Worked perfectly on my Weber 300. Especially helpful was showing how the ignition clip goes in and how to work around corroded screws. Thank you!
EXCELLENT VIDEO! Ordered the same parts from Amazon, was able to remove the set screws thanks to a little WD-40, and replace WITHOUT taking the whole grille apart!! Whole operation took just about 20 minutes.... Thanks again!
Your video saved me hours of work. Burner replacement was very easy, and the new burners worked perfectly. 😊
Great video! Saved so much time doing it this way! Wrench worked for removing screws.
Great video! We were able to replace the burners on our Genesis grill following your demonstration.
Fantasic!! Did you have issues with the screws holding down the burners?
@@GaryQuiring Ours were in better shape than yours luckily and came off with a socket.
Thank you for this video. I have been in a leg cast and not able to take apart the grill as depicted in the instructions provided with the replacement burner tubes. I was able to easily replace my burner tubes today. Thanks again!
Worked perfectly on my Genesis E 330.
Thank you. Saved me at least half an hour. New tube from Amazon (quilimetal with screws) lit up perfectly real quick.
I am having the same problem with those screws. Thanks for the help in getting the tubes loose. I will try it tomorrow
Those screws were a PITA. After I made the video I think the best way would probably be a screwdriver and hammer. Chisel off the side of the screw flange so the burner comes out. You can leave the center of the screw in there.
@@GaryQuiring Got it! I actually try a method of bending the edge of the tube that goes over the screw and then remove it that way without messing with the screw. i dont want to bend my new ones so il try to chizek the screw
FYI, spinning the screws out with vice-grips was a whole lot easier than trying to cut steel off of the screw heads.
I had tried that, the screw head disintegrated into small bits.
Awesome video, thanks for the info. I didn't want to take the whole grill apart.
Is there anything special about setting the tube back into the grill? I'm wondering how you know the gas is getting into the tube without leaks.
I was wondering the same thing when I replaced them. The tubes fit over the pipes. They are not screwed in.
Thank- you so very much for the great detailed instructions, so I didn't need to take the whole bbq apart! 😊
I replaced all three burners and surprisingly was able to get two of the rusted screws out with pliers.
One of the burners has an orange flame, the rest are blue (as is correct) did I do something wrong?
Your right you don't need the screws but maybe try vice grips or a grinder .worked for me.
Thanks so much for the detailed instruction!
penetrating oil , heat, and a small crescent was able to remove the screws out. replace with stainless
Amazing thanks very much for the great help!!!
Very helpful, thank you😊
good video very helpful thank you.
These are covered under the lifetime warranty and Weber would have sent you new ones for free.
There is no lifetime warranty on the burner tubes, it's 10 years. My grill is 12 years old. Have you actually tried to use their warranty, it takes numerous calls and is very frustrating. Not worth the hassle.
www.bbb.org/us/il/palatine/profile/bbq-supplies/weber-stephen-products-llc-0654-14008294
Yes mine I over 10 years old. Just called yesterday. Sent a picture of the flame color and they are sending me new ones. They are also sending new triangular shaped covers all at no cost. Burners, grate, and the lid and bottom half are all covered in the lifetime warranty. Gave them the serial number and that’s all they needed. Was very easy process.