Thank you!! I installed this unit on my bike CBR 1000 and now it pops super loud and amazing flames come out! Is so loud that my ears hurt! I have the SC project exhaust installed as well. Amazing information on your channel. Thanks again!
Tambem quero montar este sistema na minha moto, ja vi varios videos mas este programa Sp que tu usaste parece ser o mais facil de isntalar, obrigado pela ajuda, tens uma CBR muito linda
you can do the same AND BETTER JOB with woolich racing or any other ecu flash software.quickshifter,launch control and pitlimiter all being control by the oem ecu!!!
Hello my friend, I bought this unit form my 2011 CBR 600 rr, I would like to ask if the installation is the same. I have received instructions but they are written and I’m kind of confused. Your help is appreciated thank you
Hello. Wondering if you can help… I installed the full race unit on a 2007 Cbr600rr and when I connect the speed sensor it shows zero on the dash even when the bike is moving but if I connect the sensor directly from the bike it works normal. Can you help?
Tsssssss .....como se alguém como vc precisasse de ajuda eletrônica rsrsrsrsrs..... Chega de bugigangas irmão , fala serio , cadê o escap ? Forte abç !
I got a Generation 3 SP FRU for my CBR 600 Fi MY2001. The Setup does not work. It flashes „ad“ and when i Push the Right Button for Pitlane Limiter then it flashes PL but it does not work. I also can not Switch to LC(launchcontroll) and the Quickshifter does not work either but the Sensor flashes SP for it is all Fine. I Puke!
Yes, it's the same, just keep in mind that if you have any PC wires that uses the same that SP just make sure the SP connects first and then the PC, by that order :)
the rear wheel must be static, the sensor attaches from the speed sensor, when the bike is in stand still, just twist the throttle max, the rpm will hold at the pre set rpm for launch control.
Pois, mas ainda é longe, e eu tenho uma fzr 1000 que ta parada a 10 anos e queria por a máquina a andar, no entanto nao queria gastar na mota o que ela vale.
Please help, the km information and fuel values of my honda 1000 rr engine are constantly coming and going, do you have any information on what should I do??
Thank you!! I installed this unit on my bike CBR 1000 and now it pops super loud and amazing flames come out! Is so loud that my ears hurt! I have the SC project exhaust installed as well.
Amazing information on your channel. Thanks again!
Harold Familia exhaust with cat?
SC project exhaust is badass
Michał Madej No cat 🐈
PeteyPablo It is! I love it.
@@haroldfamilia6037 I have the GP-M2 with no cat and it also sounds great
Very good function on this Unit i like it!!!
Tutorial Muito bom mesmo ! Like a pro !
Só faltou uma coisa pa ser perfeito... 👌
...os bloopers no fim 😂 !
👊
Tambem quero montar este sistema na minha moto, ja vi varios videos mas este programa Sp que tu usaste parece ser o mais facil de isntalar, obrigado pela ajuda, tens uma CBR muito linda
Muito bom! Grandes conhecimentos!
Abraço
Obrigado!
Amazing video!
Thanks!!
you can do the same AND BETTER JOB with woolich racing or any other ecu flash software.quickshifter,launch control and pitlimiter all being control by the oem ecu!!!
I have fireblode 2016 what i can buy to do like u details product
We’re can I buy this set up I want it for my bike
Bom material, isso é que vai ser bombar ;)
Obrigado!
Where can I buy this unit? I haven't seen one like this on ebay
Hello my friend, I bought this unit form my 2011 CBR 600 rr, I would like to ask if the installation is the same. I have received instructions but they are written and I’m kind of confused. Your help is appreciated thank you
fitted to 2011 blade and now my engine management light flashes then stays on 🙈😭😭
Which wire color to connect from Unit SP to ECU... For R1 2012.. It's same with cbr1000?... Please help me
Bela da bateria igual á da minha CRF, weight reduction 😁
Esse extra sera incluido num proximo video, quando colocar o escape vou pesar tudo o que tirei para fazer as contas ehehe
Mano, agora percebo porque alguns turistas dizem que alguns portugueses tem sotaque russo. Rsrsts bom video
ahaha
Hello. Wondering if you can help… I installed the full race unit on a 2007 Cbr600rr and when I connect the speed sensor it shows zero on the dash even when the bike is moving but if I connect the sensor directly from the bike it works normal. Can you help?
I’d email Sp the company and ask lol
Grande continua cosi👊
Bro r1 installed
Onde acho para comprar e vim para o Brasil?
Cant you send me a page to buy this producto, please
Matias vais meter tambem o auto blip para reduzires sem embraiagem?
thank you
;)
Hi can I know what is the engine cut off timing for your fireblade?
я могу это поставить на cbr1000rr 2012?
Tsssssss .....como se alguém como vc precisasse de ajuda eletrônica rsrsrsrsrs.....
Chega de bugigangas irmão , fala serio , cadê o escap ?
Forte abç !
I got a Generation 3 SP FRU for my CBR 600 Fi MY2001. The Setup does not work. It flashes „ad“ and when i Push the Right Button for Pitlane Limiter then it flashes PL but it does not work. I also can not Switch to LC(launchcontroll) and the Quickshifter does not work either but the Sensor flashes SP for it is all Fine. I Puke!
boas amigo se montar em uma cbr 600 rr deita chamas como essa 1000?
How's the quickshifter holding up any problems?
No problems so far :)
Good life
COMO SE CHAMA A MUSICA? BOM VIDEO
So does all of the software work at the same time
Meaning the quickshifter,pitlane limiter,launch control
Or u could only have 2 at the same time
All this functions are to one module
With the launch control
Could u still rev the bike pass the set revs if it's in neutral
only if the rear wheel detects movement
Matias, i just got the kit, and i have a power comander Dynojet V, the installation should be just like you did it ore any difference ?
Yes, it's the same, just keep in mind that if you have any PC wires that uses the same that SP just make sure the SP connects first and then the PC, by that order :)
Fala em PT
So the regular cbr 1000rr become 1000rr sp now lol
Hi, i have a 2016 fireblade sp, i was wondering does this work with or instead of a power commander?
It will work with a PC, this module does is not like a PC, you can't change you fuel maps with it.
Para que serve o fio amarelo?
Server para ler a rpm pela centralina
How do you activate launch control?
the rear wheel must be static, the sensor attaches from the speed sensor, when the bike is in stand still, just twist the throttle max, the rpm will hold at the pre set rpm for launch control.
quando mudas o escape?
Quando tiver t€mpo eheh
Portugues porfavor :(((((((
CRF 1000 ? )))
PORTUGUÊS !!!!
I have LeoVince GP Pro EVO2 but with catalytic converter will it shoot flames, or must I decat?
No, you have to get the Cat off
mfpmatias thank you for reply 🖖🏼 why always everything what is cool must be illegal 😂
Da pra meter na XF? 😂😂
Claro, já está encomendado lol
Depois quero testar a performance :D :D
ราคาเท่าไรครับ
Check you their website www.shiftpower.co.uk
FDS só queria ter estes conhecimentos de mecanica, sempre que vou ao mecânico sou enrabado ... e até mete nojo um gajo não conseguir fazer um crl ...
Compreendo, és de que zona?
mfpmatias Amarante (deves saber, ja foste ao raid a mondim que é muito perto)
Pois, se fosses da zona do Porto podia te ajudar :(
Pois, mas ainda é longe, e eu tenho uma fzr 1000 que ta parada a 10 anos e queria por a máquina a andar, no entanto nao queria gastar na mota o que ela vale.
bro português porfavor!!!
Existe videos que tem mesmo que ser em ingles. Compreendo perfeitamente que pessoal de Portugal quer em Português
Ok bro that ending with you on the bike was awkward 🤣🤣🤣
ahaha
Too much, I'll just pay someone to do it, but it is worth it.
;)
Please help, the km information and fuel values of my honda 1000 rr engine are constantly coming and going, do you have any information on what should I do??
o quickshift é para cima e para baixo?
AMOKvs ao que parece so é upshift
So pra cima.
I wonder how much damage it would do if you used the pitlane limiter as a rolling launch control? :D