Just what I was looking for. Thanks. I'd add that with my particular grease gun the connector was getting stuck on the fitting. I found that the best way to remove from the fitting was to unscrew from the hose and grip with a pair of pliers and pull.
My 2022 Tracker has the Dexter EZ lube axles. Can't say for sure, but yours also appear to be Dexters. According to Dexter instructions.....you first jack up the tire, then spin the tire while injecting grease. Not rotating tire dumps the grease in one spot and can blow the back seal. If you have a Dexter system, search for Dexter E-Z lube system.
At the time when I purchased the boat it was explained that is how you know the grease cavity has been filled. For bearing buddies this will definitely blow out the rear seal. I didn't have any seal issues filling this way on the tracker trailer.
I greased the actual hinge that the trolling motor pivots on and also the pins that lock it in place. Greasing the pins lets it release so much easier with the pull handle.
I have a similar motor on my boat and am trying to find a way to keep the motor from turning when trailering. Do you use anything other than a transom saver?
I also had issues sometimes with it turning. The best solution I found was when using the transom saver make sure the tilt really locks it into place and the bungie is tight.
The hardest part is finding where the squeak is coming from. It could be within the steering wheel where you want to use a thin oil like silicone or down the cable where you want to use some grease.
Be aware that standard grease will attract dirt and dust if exposed to the environment. A silicone spray will do a better job in areas such as the wench teeth and other items that are exposed to dirt and dust.
Finding out tomorrow if I get my boat. Just like yours. So this is going to help me if I get it. Wish me luck!
did u get your boat?
Excelent video!!! Just what I was looking for too. Thanks for sharing us how this grease gun is assembled. It was very useful for me.
Just what I was looking for. Thanks. I'd add that with my particular grease gun the connector was getting stuck on the fitting. I found that the best way to remove from the fitting was to unscrew from the hose and grip with a pair of pliers and pull.
Good video! Thanks for the information! Much appreciated for making this
My 2022 Tracker has the Dexter EZ lube axles. Can't say for sure, but yours also appear to be Dexters. According to Dexter instructions.....you first jack up the tire, then spin the tire while injecting grease. Not rotating tire dumps the grease in one spot and can blow the back seal. If you have a Dexter system, search for Dexter E-Z lube system.
Definitely the best practice, to rotate the wheels while adding grease.
Great video super helpful thank you!
You're welcome! Glad you liked it!
Outstanding videos, very helpful.
Thank you! I appreciate that
Very helpful, thanks!
You're welcome! Glad it was helpful! :)
Thank you so much 🙏🏼
Exactly the video I needed 😊
You're very welcome! There was so much I didn't know when I got my first boat, I love making videos like this.
Excellent video sir need grease mine thank you 👊🏻👍🏻
Glad to help!
Excellent Video!! Big help. Thanks !
Very helpful.
Glad I could help!
Just curious why you keep pumping when you see grease? That’s how you blow out seals.
At the time when I purchased the boat it was explained that is how you know the grease cavity has been filled. For bearing buddies this will definitely blow out the rear seal. I didn't have any seal issues filling this way on the tracker trailer.
If you keep greasing your bearings with a grease gun you can blow out the seals, bearings should be inspected every year, I pack mine by hand.
Nice video!
Thank you!
I noticed you mixed grease types...different colours means different viscosity?
Red/blue typically means marine or not
Great vid.
In a lot of cases you have to hold the nipple on the fittings.
Good stuff sir. Silly question... On that last part on the outboard that you greased, what is that little lever for?
I greased the actual hinge that the trolling motor pivots on and also the pins that lock it in place. Greasing the pins lets it release so much easier with the pull handle.
@@mvboutdoors I meant the lever on the outboard..
I have a similar motor on my boat and am trying to find a way to keep the motor from turning when trailering. Do you use anything other than a transom saver?
I also had issues sometimes with it turning. The best solution I found was when using the transom saver make sure the tilt really locks it into place and the bungie is tight.
Any suggestions on greasing squeeky stearing wheel?
The hardest part is finding where the squeak is coming from. It could be within the steering wheel where you want to use a thin oil like silicone or down the cable where you want to use some grease.
How do you like this grease gun? I need a new one
I'm still using it today, almost 5 years later, so pretty happy with it lol
How come so many people who post diy videos can't find someone to hold the camera while they're taping?
¯\_(ツ)_/¯
Be aware that standard grease will attract dirt and dust if exposed to the environment. A silicone spray will do a better job in areas such as the wench teeth and other items that are exposed to dirt and dust.
Great advice, definitely some info I could update from this video at this point.
That is not the Steering linkage grease point, that is the tilt tube grease point.