ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Tutorial How to replace GU10 bulb in Lithonia Lighting Meshback Track Head
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2018
- Not entirely intuitive when you first look at the fixture. But not as difficult as it seems if you have the proper tool. Only slightly more difficult if you don't have the tool but use your fingers instead. Do this at your own risk, be careful.
Splendid. This is a perfect step-by-step tutorial. I can barely turn doorknobs, but this tutorial has let me do the job myself.
Wow I've watched so many of these videos today and this was exactly what I needed! Thank you so much! The three-finger twist worked perfectly.
yay. glad I could help.
Wow...five years later, and this video has been absolutely helpful. Thank you so much!
Thanks. Hope I gained a new subscriber.
@@michaelerbreviews of course. Thanks again.
Omg I’m a not handy person and found this video super helpful! Four of my track lights came with my house died and I thought I had to replace the entire track head for each one of them and I have no idea how to do it (could be easy). So I’ve been procrastinating to fix it and have been living with the darkened lighting situation for a few months. Finally, today I started to google how to fix this, and now I know I just need to replace the bulbs and it’ll be a really easy fix!!! Being a not handy person with no handy friend sucks, but I’m glad I found your video and thank you soooo much!!
Thank you for your positive comment. It makes me really happy to know that my video helps you.
Thank you so much for this. Growing up without a dad has is struggles sometimes
awesome guy!!! 2 years my bulbs started going finally all 3 died.couldn't figure how to get the darn bulbs out..just did your method without the piece but just fingers...success!!!!
jaws 77 That’s music to my ears. Glad I could help you out.
Yes thanks for the reminder to save this video for when my bulbs go out in a couple of years. 99% certain I will forget by then haha
Very helpful, thanks a million
That was very helpful. Thank you!
Glad to hear you found it helpful!
Super helpful! Thanks!
Thank you so much!!! Very helpful!!
You're welcome!
Hi. Thanks for this great video. We have these lights extended down from a track over a staircase. Is there an extension tool that would enable gripping the fixture while applying the turning torque needed to loosen the bulb? Or otherwise how do people like us levitate up to the bulb? I wonder too if Livonia will sell the tool to us.
Not that I know of. You'll probably have to use a ladder or rig up a scaffold of some sort depending on the height and difficulty factor.
Extremely helpful!!!
Thanks for saying so. Glad it helped.
Do you have another video on how to take the light off of the track to get to the point of handling the fixture?
The fixture twists out of the track. Grab the base, gently pull down and twist 1/4 turn
What about a Hamilton Bay track light? The bulb to be removed
I have this same fixture, except mine has glass cover over the bulb. DO you have any suggestions? Thanks for the video!
Wesley Wooten Sometimes a glass cover over the bulb is secured by a spring clip. If that’s the case, you would have to carefully and gently remove the spring clip from between the glass cover and the metal frame surrounding it.Needle nose pliers might help but you have to be careful you don’t break the glass.
@@michaelerbreviews thanks! This one unscrews. I finally solved it. Bulb looks like a sim card, rather strange.
Thank You so much!
You're welcome! Hope you'll consider subscribing to my channel.
Hi, Do you know where I can order that key removal tool. Or the name of it. Thank you!!
I do not know whether that part is available separately or not. I imagine it is but don't really know where. Your best bet is to contact Lithonia and ask.
My problem is the glass attached to the bulb comes away on the suction leaving the bulb stuck in the fitting. How do i get the remains out i cant get enough grip on the sides?
That’s a tough one. You may have to get a new fixture.
I have the stainless steel version of your set. It wont turn for me when I try and push. Its actually painful how tight it is.
I agree with you, I can't get mine out no matter what I do.
I have the stainless steel also but I had the guy we use a contractor he came in, there's two screws on each side and then he removed it
I need replacement bulbs with this design. Where can I find them?
I get mine from Amazon #ad amzn.to/3TtVr3w
Mine has a plastic cover over the bulb and I can't figure out how to get the plastic cover loose
Are you certain the plastic cover isn't integral to the bulb?
Are those lightbulbs LED?
They could be LED or Halogen
My bulbs are just smooth glass, they will not turn out. This has the making of a great joke
They will. You just need to have the proper technique.
Yeah, the problem is most people lose that suction tool and then it's virtually impossible to change them
It's not suction, it's a disc with several nubs that fit into the edge of the bulb assembly. I am sure that people lose or misplace the tool. As I demonstrate, it's not impossible to remove the bulb without the tool.
Reviews, Tutorials & Tech thanks I figured it out with good old fashioned duct tape
Dulce Biesanz yay!
Michael, it is a suction cup if you have the halogen bulb version of the fixture. Yours is specific for LED bulbs. This is a miserable design- I can’t believe they have stuck with it for so long. But thank you so much for this video.