How to read diagnostic codes on a mk1-2 Ranger / B2500 | flashing glow plug light fixed | no OBD

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ม.ค. 2025

ความคิดเห็น •

  • @Bombardier9011
    @Bombardier9011 ปีที่แล้ว +3

    Thanks for this excellent description of how to diagnose this common fault. My glow plug light has been doing this for yonks, even after a head gasket change when glow plugs were renewed. Comes on after around 30 mins steady driving. No loss in performance, so probably simple sensor fault.

  • @tonymatthew9659
    @tonymatthew9659 3 ปีที่แล้ว +6

    Dude if you ever stop making videos we will hunt you down ;-) ... great info .... im using your vids for repairs on my 2002 Ranger right now ... thank you so much ...

  • @kenthetuner
    @kenthetuner 3 ปีที่แล้ว +1

    RANGER FORTIN, great video mate. Thanks for passing on your expert knowledge.

  • @umelec
    @umelec ปีที่แล้ว +2

    Hi, thanx for this great video. So I have a question. I have Mazda B2500 but I do not have list of error codes showing on this video. I can not find it on the net. Do you have somebody some idea how to get it? Thanks

  • @ConnorHallett
    @ConnorHallett 3 วันที่ผ่านมา

    Only just found your page after spending the last hour looking for the obd port and looking online for info. Got the like and subscribe for this vid alone, proper useful info! Only recently bought my ranger, its a 03 single cab 4x4 which i think are getting fairly rare to come by now and i want to keep it running right and use it for work as it should be.
    I think ive got a leaky injector, i was wondering is there anything on these to tell you an injector is on the way out in terms of diagnostics or do i need to go old school and just pull them and test?

  • @esseel7896
    @esseel7896 3 ปีที่แล้ว +2

    James what pins do you bridge to get ABS codes?

  • @gloumer7702
    @gloumer7702 ปีที่แล้ว

    great video, thanks for that! I have a flashing airbag light. After bridging the contacts as you describe the light continues to flash every 5 seconds. No specific pattern. Any ideas how to move on?

  • @jaakkoheikkinen3158
    @jaakkoheikkinen3158 8 หลายเดือนก่อน

    Thanks man
    This helped us A lot.
    Creetings from Finland

  • @TheNorfolkHoneyCo
    @TheNorfolkHoneyCo 2 ปีที่แล้ว +1

    Brilliant, as a total beginner with vehicle mechanics I've found your videos really helpful and interesting (Mostly way above my knowledge base!). I recently had a flashing glow plug and had no idea what it was, turned out I'd forgotten to plug in the MAF sensor on the air intake whatsit as in your video. Now I know how to diagnose some of the issues. Any chance you could do some more basic stuff. With your help, I've changed the oil, filter, air filter, pollen filter, Rear Diff Fluid. Transmission oil next, have you done a video for that? I have a 2006 Ford Ranger XLT Thunder 221k.
    Thanks again.
    Stewart

    • @rangerfortin1504
      @rangerfortin1504  2 ปีที่แล้ว +1

      Yes bud I’m actually doing more basic stuff now so people can do there fluid changes and cam belt and rear shoes ect , tbh I need to pull my finger out and edit some of the videos from winter

    • @TheNorfolkHoneyCo
      @TheNorfolkHoneyCo 2 ปีที่แล้ว

      @@rangerfortin1504 That's great news, Thanks. Could I ask a quick question, what spec oil should I use in the front diff? Being a complete novice I've managed to change the rear diff with LSD oil but I'm assuming I need something different for the front? Any help would be much appreciated. If you're ever in Norwich give me a shout and come grab a jar of honey for your efforts :)
      Stewart

    • @rangerfortin1504
      @rangerfortin1504  2 ปีที่แล้ว

      @@TheNorfolkHoneyCo front diff is use 1.5L of 90w gl5( so your ordinary diff oil)
      And Rodger that 👍🏻

  • @richardrichard5409
    @richardrichard5409 ปีที่แล้ว +1

    Brilliant, thanks for the upload, from Banham up the road😎

  • @garethwalker847
    @garethwalker847 ปีที่แล้ว

    Great video, have you had issues with the alternator? I changed mine as i was told it died. New alternator doesnt charge the battery until the engine is really warm or doesnt charge it at all

  • @themadhatter7232
    @themadhatter7232 หลายเดือนก่อน

    Hello,
    Me again!
    Do you know if this works with the ABS light? Mine is in atm and i cannot find whats causing it. Have changed pads and ABS pump and control unit. Since doing so thr breaks have become very soft and thr ABS light intermittently flashes on/off... Do you have any ideas?
    (I havent done the abs sensors as the garage i went to said they "looked alright" although this may be my next port of call)
    Thanks!

    • @themadhatter7232
      @themadhatter7232 หลายเดือนก่อน

      For more context it's a 2003 Mazda B2500 Diesel

  • @filipbark3838
    @filipbark3838 2 ปีที่แล้ว

    Any chance you know how to get the abs codes? Saw a video of the abs lamp flashing like in you video but he did not say how he bridged it.

  • @gbassant6610
    @gbassant6610 3 ปีที่แล้ว +1

    Great video! My glow plug light has been flashing for ages now. Just done the diagnostic with the wire and its flashing 1189 (pump speed sensor malfunction). Any ideas where to start looking? Many thanks

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      Speed sensor is the 2 wire ally plug at the front of the pump

    • @nigelforge542
      @nigelforge542 3 ปีที่แล้ว

      @@rangerfortin1504 I have the same code, can you offer any advice please.

    • @nigelforge542
      @nigelforge542 3 ปีที่แล้ว

      I just can’t find any info on replacement part. Any ideas please. Thankyou.

  • @geoffhackett6509
    @geoffhackett6509 ปีที่แล้ว

    what is the light under the speedo like a red cone ?

  • @marvc5654
    @marvc5654 2 ปีที่แล้ว

    what is the red light in the middle that's on?

  • @antonioelavai2954
    @antonioelavai2954 ปีที่แล้ว

    Hello,
    My Mazda B2500 had burnt plugs twice this year. What could it possibly be?
    Tks

  • @ImDoingitmyway2345
    @ImDoingitmyway2345 3 ปีที่แล้ว

    Hi my 02 ranger has a glow plug light flashing and lacks power any ideas would be appreciated

  • @richardalmond2328
    @richardalmond2328 3 ปีที่แล้ว +1

    Big thank for that, haven't needed to do this yet but would I put my scope wires in the jumper wire positions I'm assuming yes lol I now I can read the lights but the oscilloscope looks way cooler lol 😎👍 cheers

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว +1

      Bridge what I’ve done and then put the probe on pins 1 and 4

    • @richardalmond2328
      @richardalmond2328 3 ปีที่แล้ว

      @@rangerfortin1504 cheers mate much appreciated 👍

  • @ferdinandcastillejo1215
    @ferdinandcastillejo1215 3 ปีที่แล้ว

    how about the flashing RFW light.can you figure out? fuse checked found OK.

  • @autocars1
    @autocars1 ปีที่แล้ว

    Can you post obd 1 4 digit code list for my ford endaevour
    I m from India and getting trouble ,higher rpm in idle for some time then MIL on and engine will get in normal rpm

  • @alclips2583
    @alclips2583 6 หลายเดือนก่อน

    Thanks for this video, so helpful.. where i can find manuals for this model of truck, i am searching the web for quite sometime now but i couldnt find any...

  • @simonebernabei4950
    @simonebernabei4950 2 ปีที่แล้ว

    good morning everyone! yesterday yes the malfunction light is on, p1312 timer control valve circuit malfunction, what should i do? thanks, greetings from Italy 🍺

  • @HaliG69
    @HaliG69 ปีที่แล้ว

    hi there, i tried this (may have put it in the wrong pin) and now my instrument cluster displays no lights... engine still turns on though. Any ideas?

    • @gloumer7702
      @gloumer7702 ปีที่แล้ว

      Check the fuse box. Your manual will tell you which fuse is for the dashboard lights

    • @ВалентинКръстев-г7г
      @ВалентинКръстев-г7г 2 หลายเดือนก่อน

      Hi, I had the same problem. All the lights on the dash went out, but it still started. What was the damage for you? I checked my fuses . Ok

  • @jetcowallcoatings2684
    @jetcowallcoatings2684 3 ปีที่แล้ว

    Hi the immobiliser light has started flashing on my 99 2wd ranger. It flashes 2 long and 4 short and when ignition on. Was fine before but I haven't started it for about 2.5 months ish, went and changed cambelt today and noticed that after I started the engine the immobiliser icon (car with key inside) flashes. Could you shed any light on this? And how can I reset the light so it stops flashing?

    • @jetcowallcoatings2684
      @jetcowallcoatings2684 3 ปีที่แล้ว

      Just reset the light. To reset the dash code flashing, make sure key is at off /lock position, disconnect the battery negative terminal and wait 30 secs, then press brake pedal and hold for 20 secs, then reconnect battery negative. Key in ignition turn to on and dash codes lights are reset!

    • @justinholt3394
      @justinholt3394 ปีที่แล้ว

      @@jetcowallcoatings2684 you're a legend mate. Ive had this light on for ages and struggled to find a fix for it. Thank you 👍

  • @kailew4689
    @kailew4689 3 ปีที่แล้ว +1

    Great video bud. 👍🤘

  • @josecarlos-LS3
    @josecarlos-LS3 2 ปีที่แล้ว

    Muy buen vídeo, me ha ayudado mucho, pero tengo una duda, como se borran los dtc?

  • @paulhumpheryes6420
    @paulhumpheryes6420 3 ปีที่แล้ว

    Hi Mate, I've got fault code 0335 - TDC sensor, any ideas what this could be. My rev counter ain't working either. Cheers

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      Crank sensor

    • @sidavies5174
      @sidavies5174 ปีที่แล้ว

      Did you fix this my Rev counter doesn’t work and got the same code

  • @adityawiraswan4174
    @adityawiraswan4174 8 หลายเดือนก่อน

    Bro, I have ford ranger 2500, glowplug timer doesnt work, it's just activated 2 second. How about that? Thanks alot. Form indonesia

  • @TheDAferr
    @TheDAferr 3 ปีที่แล้ว

    Hi had been getting an intermittent engine check light now and again and the engine would run rough. Usually goes away after sitting and restarting used this video and got two codes 0105 boost sensor malfunction and 1312 timer control valve circuit malfunction. Are either of these serious and is there anything I can try to fix them? Thanks

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      The rough running is caused by the 1312 and it’s the solenoid valve on the fuel pump that regulates the timing advance
      Bosch part no 9 443 611 832

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      With a faulty tcv it will revert to full advance and sound knocky because it’s fuelling too early

    • @TheDAferr
      @TheDAferr 3 ปีที่แล้ว

      Thanks so much for the info and the quick reply will get one of those ordered and change it. Is the other code anything to bother with?

    • @TheDAferr
      @TheDAferr 3 ปีที่แล้ว

      Had a quick look couldnt find much, there was one on ebay at around 300. Does that sound like the right sorta price? skint the now is there any way of fixing the one I have till I have some spare money.

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      @@TheDAferr check the wiring first but once there goosed there goosed
      £200 from a Bosch supplier

  • @themadhatter7232
    @themadhatter7232 3 ปีที่แล้ว

    I got a Mazda B2500 with the reverse light stuck on. Any advice on how to fix this?

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว +1

      Change the reverse switch

    • @themadhatter7232
      @themadhatter7232 3 ปีที่แล้ว

      @@rangerfortin1504 thank you! Is it easy to access?

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      @@themadhatter7232 yes buddy

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว +1

      Have a look on my other videos for “gearbox info “

    • @themadhatter7232
      @themadhatter7232 3 ปีที่แล้ว

      Sick! Thank you very much ✌️

  • @epsi9750
    @epsi9750 ปีที่แล้ว

    mazda 17 pin? same in my laser i think

  • @andymoseley2230
    @andymoseley2230 3 ปีที่แล้ว

    Thank for sharing this info, very good of you,

  • @sidavies5174
    @sidavies5174 ปีที่แล้ว

    I have nno Rev guage working it broke when one of the cogs went on the engine think it’s the cog that has a pick up ring on dunno if they swapped the pick up ring over any help would be great as I paid £500 to get it fiexed
    Av got p335 TDC SENSOR GUESSING THATS TOP DEAD CENTER MEANING
    P0510 idle switch
    P1402 egr valve blunt that has been blanked and taken out ages ago
    Any help locating these parts on the truck and we’re to buy from would really help
    Thanks

    • @rangerfortin1504
      @rangerfortin1504  ปีที่แล้ว

      335 would be the tdc sensor yeah they’ve either swapped the reluctor ring but left the dodgey sensor in or the wires been chaffed by the front pulley
      1402 is the three wires going to the front of the Egr valve for the position sensor - basically disconnect the battery to clear the codes and make sure it’s blanked properly like on my vid and you’ll get no codes
      510 is inside the car on the pedal box bud

    • @sidavies5174
      @sidavies5174 ปีที่แล้ว

      @RANGER FORTIN I have had a look and I can't see any damaged wires I think am going to take it to a garage that does repairs and brakes rangers let him sort a few jobs for ms thank for your help

  • @MrAirsoftde
    @MrAirsoftde 11 หลายเดือนก่อน

    You still active? Video helps me get the Code but cant find a list what it means. Code is 1182. Greetings from Germany. Ford Ranger 2006 XLT

  • @AbuBakerZeed
    @AbuBakerZeed 3 ปีที่แล้ว

    Great job man! I currently have a mazda b2500 2004, and I got this code: 0089, what does it mean?, I didn't find it in the chart

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      No such thing as 0089
      1189 though
      Which is pump speed sensor

    • @AbuBakerZeed
      @AbuBakerZeed 3 ปีที่แล้ว

      @@rangerfortin1504 I check again then and tell you

  • @rafflesssadiss8182
    @rafflesssadiss8182 3 ปีที่แล้ว

    Great Video. Keep em coming. 👍

  • @garyjones9429
    @garyjones9429 3 ปีที่แล้ว

    Could you tell me what glow plug flashing 7 times in 12 seconds means please?

  • @roanoconnor98
    @roanoconnor98 ปีที่แล้ว

    Where do you find what the codes mean?

  • @relocation-house-build-journey
    @relocation-house-build-journey 3 ปีที่แล้ว

    My airbag light is stuck on any ideas

    • @rangerfortin1504
      @rangerfortin1504  3 ปีที่แล้ว

      Major fault
      If it has something wrong it will flash a number of times to tell you what’s wrong as soon as you turn the car on normally
      Staying solid means there’s something up with it big time

  • @stergiosreppas3822
    @stergiosreppas3822 3 ปีที่แล้ว

    Thanks, very help me. Thanks!

  • @v12lizard
    @v12lizard 3 ปีที่แล้ว

    Love the video 😎👍

  • @swathikumarr3597
    @swathikumarr3597 2 ปีที่แล้ว

    Bro I have Ford endeavours 2005 rpm not working

  • @SideQuestChannel
    @SideQuestChannel 4 หลายเดือนก่อน

    Thanks, Brother.

  • @mrhishere3360
    @mrhishere3360 3 ปีที่แล้ว

    👍 awsome vids