You're the first bloke to use terms on my TH-cam fest of tyre machine use. Such as the well of the rim. And to manually press the bead into the well. Must be an Aussie thing and bloody good on ya. All the Americans only do soft old two ply car tyres. You made it look as easy as it should be when everything's in the right position too. Of course. I'm going to be welding a bit more spoon onto my tyre removing tip having seen your example. These 4X4 tyres are too precious to be damaging by doing the job wrong. Thanks very much for your help.
Luv the start and end at the valve advice, I see plenty of instances where this does not occur. Twelve years in the business has me offering the little piece of advice of NOT leaving the plastic on a tube patch when reinstalling. I have seen many times where this little item can actually cause a later puncture by etching the tube to the point of it leaking ... thanks for the video.
EXELENTEEE!!!! Gracias señor por este genial invento. Estoy por iniciar un emprendimiento en el que incluyo servicio de gomería y ya copié el modelo de este aparato. UN GENIO!!!!
Very good video, I have had my trier changer for about 25 years now. I have had to do some work on it over the years but it is A money saver as u said.
You partly inflate and then deflate the tube to get it to take shape before putting the upper bead on. They even make a tube deflation accessory that uses shop air for saving time. Where I worked, in those days, the boss would make me pay out of pocket if a tube was damaged from not doing all this. That made sure we learned and didn't do our own thing creating damage.
Note the use of a SQUARE bar to fashion the tire working tool. Keeps the tool from turning in your hand while you're trying remove/install the bead - a MAJOR time & labor saver. Probably the best feature of this manual changer & it isn't even mentioned. Love the design.
Wow,,, very nice. You make this look so easy. I wonder if it's really as easy as you make it look. Either way, I don't have that machine looking tool. And if I had one, how often would I use it ? Almost never. I'm not a tire replacement shop. But I love your video. Very good.
excelente maneira de tirar o pneu, ele usou o remendo a frio na câmera de ar do jeito que eu tambem uso, só que tem borracheiro que fala que deixando o plastico do remendo, o serviço não presta..
Like this much better than the Harbor Freight version (which I bent the upright post and the tool after only doing about 150 tires, mostly 13-14 inch size), the J-hook on the end for removing the tire looks like a far better design as well.
No it's a special glycerin soap. It's really old timey soap. The soap was a game changer for me. You can mix some with water and make it watery. Use some on the beads. It is about the consistency of grease, but it is soap.
For $10 the kid at the shop will be happy to gouge your pricey rims while you wait. I change my own, save the money and time and pretty rims. Just use rim protectors cut from an old laundry detergent bottle. No scratches. Job is done right by ME.
Much easier than the tool with the arm attached that I used to have to use. But I will be really impressed if he can dynamically balance the tire with that tool
Old tire man in country Recaped tires. He would not use a air powered one. Said they ruined the bead. If he still alive he would be over 100. Year's old. This was 30 years ago
4:40 in this video is the #1 thing to remember!! Make sure the bottom side of the tyre is up in the curve. Forget the topside at this point and may I say this video is the ONLY one you need to watch, to get the info you will need. No others mention the most important part like this one...KUDOS to the star of the show!!
You're the first bloke to use terms on my TH-cam fest of tyre machine use. Such as the well of the rim. And to manually press the bead into the well. Must be an Aussie thing and bloody good on ya. All the Americans only do soft old two ply car tyres. You made it look as easy as it should be when everything's in the right position too. Of course.
I'm going to be welding a bit more spoon onto my tyre removing tip having seen your example. These 4X4 tyres are too precious to be damaging by doing the job wrong. Thanks very much for your help.
Luv the start and end at the valve advice, I see plenty of instances where this does not occur. Twelve years in the business has me offering the little piece of advice of NOT leaving the plastic on a tube patch when reinstalling. I have seen many times where this little item can actually cause a later puncture by etching the tube to the point of it leaking ... thanks for the video.
N ni
EXELENTEEE!!!! Gracias señor por este genial invento. Estoy por iniciar un emprendimiento en el que incluyo servicio de gomería y ya copié el modelo de este aparato. UN GENIO!!!!
Very good video, I have had my trier changer for about 25 years now. I have had to do some work on it over the years but it is
A money saver as u said.
O melhor vídeo que já vi simples e objetivo, Deus abençoe a todos.
i will make this to bolt on to my 110 landrover i had tyrepliers sold them by mistake i like the idea of standing up .
Nice Demo and a better made unit than the ones you see for sale.
p
888888888888888888888888888888٨88888888888888888888
iVlog ممسك
No fuss mate!
Great demo.
You partly inflate and then deflate the tube to get it to take shape before putting the upper bead on.
They even make a tube deflation accessory that uses shop air for saving time.
Where I worked, in those days, the boss would make me pay out of pocket if a tube was damaged from not doing all this.
That made sure we learned and didn't do our own thing creating damage.
baby powder makes the tube cooperate
Great video mate. Very descriptive and well editted.
Rrzddrrrzzxxka
Di mana kita bisa pesan alat tersebut
Great video , thanks from Canada
Great video, thanks 👍🏻
excellent video. you refer to it as the well, most videos they don't realize or forget to mention this important fact. well done thanks
Keren Mr,membuka ban tanpa ngos-ngosan, Mantab
Note the use of a SQUARE bar to fashion the tire working tool. Keeps the tool from turning in your hand while you're trying remove/install the bead - a MAJOR time & labor saver. Probably the best feature of this manual changer & it isn't even mentioned. Love the design.
Doesn't matter if it's square or round if you're doing it right. It can't spin in your hands when the end of the tool is in the bead...
@@weads1000@ем
Nice job!
Greetings
Very good tutorial you explained everything spot on.
@JUDGERAMBO we also have a Manual Bead Breaker which can be seen in our other videos
Excellent video. Thanks a million. Very descriptive
Great description! Thank You very much!
Great video mate - thanks for sharing. What are you using to lubricate the tire?
Ru-Glyde
الله ينور يا باشمهندس
Спасибо чувак! Очень понятно всё показал! +
изготовил себе такой же работает отлично!
Эскизик случайно не завалялся с приблизительными размерами ?
все и всегда делаю без чертежей (семь раз приварил-восемь раз отрезал!)
He made it look so easy.
Awesome build guys
Wow,,, very nice. You make this look so easy. I wonder if it's really as easy as you make it look. Either way, I don't have that machine looking tool. And if I had one, how often would I use it ? Almost never. I'm not a tire replacement shop. But I love your video. Very good.
Excellent tool.. Great upload.
excelente maneira de tirar o pneu, ele usou o remendo a frio na câmera de ar do jeito que eu tambem uso, só que tem borracheiro que fala que deixando o plastico do remendo, o serviço não presta..
Taught me alot bud , good vid
Love it!
Saludos cordiales colega.
Like this much better than the Harbor Freight version (which I bent the upright post and the tool after only doing about 150 tires, mostly 13-14 inch size), the J-hook on the end for removing the tire looks like a far better design as well.
Se ve cuando saca un pedazo de caucho del talon
Saludos cordiales mi colega.
good vid thanks
Nice my best brather thanks very nice good job
@rogerscottburchett1 If used properly It will not scratch the rim
Thank you for the tire remover.
The best repair ever thimbs up
Saludos cordiales desde Chile.
the real frustration starts when the tyre has some years... they get really solid to take dem out
Bom de mais ideia genial gostei
Im so downloading..Thank you so much for this..
Very nice idea...i like this video so much. 💛💯👌👍👍👍
Отличный станок!!!. Я буду делать станок.👍👍👍
Great video
this is the best ! Yes !!!
@dirrtymurph
Used correctly shouldn't damage the rim.
Some customers use a Finger off leather glove for add protection
@dirrtymurph put black tape on the bar it prevents scratching the rim
thanks, very helpful. Can I ask what lubricant that is youre applying. is it petroleum jelly?
No it's a special glycerin soap. It's really old timey soap. The soap was a game changer for me. You can mix some with water and make it watery. Use some on the beads. It is about the consistency of grease, but it is soap.
Great for changing the tire. How do you do the balancing?
Bring it to a tire shop .
I have a bubble balancer. Though I never balance my own.
good tools sir, i'm a new welder & start a vulcanizing shop last year, i'll copy this tools
Great video nice accent Lol. Hi from NZ
Cooooool video faster then tire machine 1oo thumbs up
Essa bancada e melhor fica bem prática pra trabalhar eu gostei , rio de j
Very informative. Looks very easy
I would like to buy one please include a link
great vid mate.... :¬)
9755235903
Call back
Call back
If word gets out you will have a lot of friends that need tire changes.
This video it's Great very simple to learn
How u made that tool where u put the tire can u please tell me
Very Good idea sir from India Karnataka
super idée cela fonctionne très bien félicitation
Saludos desde panama good
I like the vedio
Excellent, practico y cortito al pie. muy bueno..
howd you put it back on ?
Awesome video and tutorial dear mate. I will create one machine for my tire repair work. Regards,
LearningZone Build it yet?
Muy bueno gracias
The best...👍👍👍👍
whats the advantege of using donot tire beside air leak
where can i find that mount bar at?
can you balance too?
how do you break the bead with the home made tire changer?
Just drive up on the tire to break the bead.
or a vacuumsucker
If you have a hard one, lay a board on it and drive on the board. Can use a bumper jack or hi lift jack also if you have one.
how about breaking the bead ? ? ?
For $10 the kid at the shop will be happy to gouge your pricey rims while you wait. I change my own, save the money and time and pretty rims. Just use rim protectors cut from an old laundry detergent bottle. No scratches. Job is done right by ME.
you ought post a video on how and what u use, thanks a lot!
Спасибо. Монтажка двух сторонняя класс.
Good job👏👏😍👍👍
music sounds like the beginning of a tv drama from the 90s
Tq for sharing
is very nice I like this
Good jod sir👍👍
It is a labor-saving machine for removing tires at an affordable price.
can u mount or demount a runflat tyre?
Much easier than the tool with the arm attached that I used to have to use. But I will be really impressed if he can dynamically balance the tire with that tool
Old tire man in country Recaped tires. He would not use a air powered one. Said they ruined the bead. If he still alive he would be over 100. Year's old. This was 30 years ago
Very good idea sir
how did he break the bead
Süper 👍
Tell me is the chemical name used
manual tyre changer es muy buena la tecnica que has empleado mi gusta.
Great product. I would like to buy one and shipped to the united state
4:40 in this video is the #1 thing to remember!! Make sure the bottom side of the tyre is up in the curve. Forget the topside at this point and may I say this video is the ONLY one you need to watch, to get the info you will need. No others mention the most important part like this one...KUDOS to the star of the show!!
What is the Lube?
+sahmadi1000 soap
sahmadi1000 a little amount of dish washer liquid and water mixture is enough lubricant
Parabens ceanio
👍
there a guy at my local tire shop that change my tire and his name was manual. i thought this was the video.
Must actually be named "Manuel".
Chao cac anh.video nay rat huou dung chung ta nen hoc hoi de mo dich vu thao vo xe ma o can ton nhieu tien
Sir aap 185.16 ka khol kar bataye
is the narrator Russell coit?