How to Replace Vapor Canister Purge Solenoid Valve V6 3.6L 10-11 Chevy Camaro
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Buy Now!
New Vapor Canister Purge Solenoid Valve from 1AAuto.com 1aau.to/ia/DMEE...
In this video, 1A Auto shows how to remove, install, and replace the vapor canister vent valve. The video is applicable to the 10, 11 Chevy Camaro.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/o9q/1AX...
• 10mm Socket 1aau.to/oPS/1AX...
• Trim Tool Set 1aau.to/omU/1AX...
• Ratchet 1aau.to/oaaT/1A...
For More Info visit us at 1aau.to/h/aZi/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I had issues with my Camaro every time I fueled up. Didn’t matter if it was from empty or half a tank, it would sputter on the first start attempt but eventually fire up after the second or third. This video and these comments helped me solve my issue, and the part is only about 20$ for OEM. The job took 5 minutes total. Thank you 1A Auto for the video!
How did you fix I have same problem
Need more Camaro videos!!!!!
That helped a lot! I can tell mines is bad because every time I put gas in it and start it back it barely cranks and the it gets back to normal
+Qualyn Ball Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/vapor-canister-purge-solenoid-valve-dorman-911-079/i/dmeev00008?TH-cam&CTA+Comment&SlSr87xLavs
mine does that now
Also a perfect video for a cadillac ats...thank you
I love this channels got everything man !!!
mine was not vacuum sealed properly in my 96 z28 Lt1, caused it to have random multiple misfires at low rpm until i stuck my foot in it then it would smooth out. Thx for the vid!
I have this same issue. What all did you do sir? Thanks
Do we have to disconnect the battery before replacing it?
Was wanting to know how to fix the vacuum lines on a 1997 Chevy Camaro 6 cylinder 30th anniversary
Why do these go bad so often on my camaro?
Hi..I have a problem with my car. camaro ls 2013.. the code is P0442..What does it mean.?
+jose Lao That is a problem code for a small leak in the evap system. You will have to locate the leak, a lot of people try a new gas cap first, and then I recommend you try a new purge solenoid like in the video and can be purchased here: www.1aauto.com/vapor-canister-purge-solenoid-valve-dorman-911-079/i/dmeev00008?TH-cam&CTA+Comment&SlSr87xLavs
What is the name of the tube that goes from the purge valve to the intake manifold?
Will this part, show a po300 code
What does high purge flow mean ?
Great video thanks for your help
How much this part cost coz i saw it on ebay for 18 usd is that right ? Or should i also change the part located near rear tire to stop my check engine light
+Joe Badd Thanks for checking us out! What is the year/make/model and engine size of your vehicle?
+Joe Badd The part number for the one you would need is DMEEV00008 or 1AEEV00013.
+Joe Badd We do not currently carry this part for your vehicle.
I got the code P0499. which other information told me its the canister behind the passenger side, rear tire and up underneath. you can only see the bottom of the canister..looks like a major pain to replace. how do i know the code is for that part and not for the part you detailed in this video without taking the car to the shop and spending over $600?
I agree. Everyone else seems to think it's the one you are talking about. I have the same issue. I had this happen when the vehicle was under warranty and they fixed it. They told me they had to drop the rear end to get to it to replace it. Less than a year later, the same exact thing happened again. Apparently this is caused by attempting to top off your tank one too many times. I guess you are supposed to stop pumping when the pump stops.
I always stopped pumping with the first shutoff, and it still failed every 15,000 miles. Now, I never fill my tank more than 3/4 full. I guess we'll see next year whether this works.
So what was it? The rear one or the one by the engine ?
Very helpful video!! Thanks, God bless
Check engine light is on on my camaro 2010 i scan and reset the code p0449 the light went away but not for long after i remote start the car the engine shut down and engine light is on again it did that 3 time
my question is that the part i need to change ? Or its the one located near the rear tire thx u
Is this the same for the 2010 Camaro v8 6.2 ? Or send me a link to find out where it’s at
+Louie Martinez It may be the same or a similar process. 1aauto.com
Will this Improve my Heat ?
I replaced this part and the check engine light is still on, how long till it comes off? Thanks
+Eazyebnk It may take three heat cycles or 100 miles of driving to clear out of the system. Hope this helps you out. 1aauto.com
Did this clear the code?
@@TheDoc500 I know its 2 years later but incase anyone else comes across this; but after replacing it took two days for the light to come off for me I think because don't drive very far for my commute.
Where is the vent valve canister located on a 2019 camaro v6
I hope this will fix my camaros issue
I think this is the cuase of every time i fill it up the car starts but a lil rough then it’s back to normal
Hey bro did it work for you?
Carmelo Galvez did you solve the problem? I have the same issue
This work with 2017 version?
+@ItsTjWilliams This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
Would this cause a P420 code on both 02 sensors? My right bank 02 sensors are detecting a cat converter inefficiency, and I'm trying to see if I can get around buying a new cat converter.
+JLock17 Thanks for checking us out! The most common cause of the P420 is an issue with the cat itself. If this is defective even if there are new o2 sensors installed, it wont read correctly. Having the vehicle diagnosed may be the best way to go as there is also a chance they are the o2 sensors as well, this will tell you for sure what needs to be replaced.
@1AAuto do you know what would keep the p0420 coming back on after its been replaced and the o2 sensors?
Where is the vapor canister vent valve located
How do clean the old one?
Unfortunately out of stock at the time of this writing, but an excellent tutorial nonetheless.
Vent valve or purge valve, which one are you replacing?
purge valve
Is it the same as the V8's??
Is this the same thing as a Evaporative Emissions Canister Vent Solenoid?
+George Louis Yes that would be the same part! 1aauto.com
@@1AAuto I asked at autozone and they keep showing me a part with a hose attached to it. Could two different parts from two different locations be pulling the same code?
Is this the same for the Pontiac G8?
+Marcus Boyd We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
I bffgats i have an 09 traverse with a 3.6....could this part be so bad that it won't let the car start at all ?
Got the same problem on my traverse. Did u ever figure this out?
Is this the same as p0496 on a 2014 camaro? I'm about to order it if it's not too much.
Curios to know if your engine code cleared ? Same car
@@nigueltilghman5998 i cleared mine myself, wasn't a permanent code. it shouldn't come back though. i have a 2010 rs
I just got a code saying high purge flow , on my 2010 camaro rs, do i have to switch out the purge canister?
+Khaoz_ Temper It might be a bad canister that is triggering the light. Here is a link to them on our website if yours has gone bad. www.1aauto.com/vapor-canister-purge-solenoid-valve-dorman-911-079/i/dmeev00008?TH-cam&CTA+Comment&SlSr87xLavs
Thanks do i have to disconnect the battery after i install the part for the check engine light to go off or does it turn off by itself?
Did you find out? About the engine light
Thank you so much
Thanks for checking us out. 1aauto.com +Rudy Morales
P0496 code, common in Chevy's / Camaro. Solenoid purge valve that costs between $30-50. (Not the vent at rear end of car). This is a DIY easy 5 minute fix and your car will run like it's brand new.
qssneaky after the install , can I disconnect my battery so clear the engine code?
@@downtowndaniels9238 yes
Where did you get your part. I can’t seem to find a camaro fit. Mine is 2015. Just ordered one on amazon for 35. Dorman brand
freudenberg03 my 2013 fits your exact description I hope it's as simple as this
But why is a a common problem?
Same on 2012?
Where is it located on 2002 Chevy Camaro please help
Check your Manual
Will this work on a 2013 LT?
+Jason King It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com
Should be the same. I can't imagine why they would suddenly change the position of it on the same motor.
Where is it located on a 2012 Cadillac CTS ???
+ThePoblanito1 Thanks for checking us out! This should be on the back behind of the throttle body on the manifold.
Can you tell me what code it gives when this part is bad? Is it P0449?
+Mary Witcher It seems to be an EVAP code possibly pointing to the vent solenoid. We carry the new valve solenoid shown in this video on our website. Here is a link to them www.1aauto.com/vapor-canister-purge-solenoid-valve-dorman-911-079/i/dmeev00008#TH-cam&CTA%20Comment&
1A Auto Parts When you put gas in it and it barely cranks . What does that mean
is it the same process with a 2013 camaro rs?
+yobany 13 We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application.
can you make a video about it? i really need to fix this problem!
+yobany 13 Thank you for the response. We will forward this to our Studio in hopes of getting a video uploaded in the near future. If you do need the part, please view www.1aauto.com/search?q=purge&year=2013&model=8