Gel Blaster Alloy Barrel Installation Guide | Gelsoft Tech Talk
ฝัง
- เผยแพร่เมื่อ 30 พ.ค. 2024
- It's our first T.E.H Teach Talk with our Tech Guru Mat and he will be showing us how to install a alloy barrel and T-piece on a Gen8 M4A1 Blaster.
Links Below:
Tactical Edge Hobbies:
www.tacticaledge.com.au
Tactical Edge Hobbies (Facebook): / tacticaledge.com.au
Australian Gel Blaster Enthusiasts:
/ 509666222755870 - กีฬา
Bangin the Blackalicious in the background. Lovin' it!
Thanks for the tutorials guys, keep em coming. Can you do replacing a buffer tube next?
Lol the title-
How to install “on a alloy barrel on”
Great thanks guys. Can you do a video on metal outer barrel and one for metal fishbone too please. Love your vids guys
i wish there is a video about compatibility of barrels, rails, adapters and stuff
Great Vid! Could you please do a gearbox wiring tutorial?
Nice info thanks Gilly.what happened to the HopUp video?
That a great video. Can u answer my question pls. 'T' piece m4ai j8 same as m4 punisher v2?
Is this the same for the lvoa?
Hi tac edge, do you guys have T peices for a punisher v2 available at all?
Matchstick is a great mixing stick and applicator
Great vid mate,
I've changed mine but i noticed some gel ball leaks from the end muzzle after each shot. Is it normal?
Cheers mate.
@@TacticalEdgeHobbiesAU thanks bro, much appreciated. I'll give it a check later.. cheers
@Jared King Thanks for saying how you fixed it. How far did you have to put the barrel into the t piece?
Where can i gey a tpiece for the he acr
just bought an m4 v10 gel blaster and I wanted to replace the t-piece and barrel. I just don't know what exactly I needed to buy ( specs and all) to replace the stock parts. Hope you could help and tell me what's the best thing to do. Thank you guys in advance. Cheers
The barrel is 29.5 cm long. Inner diameter is 7.3mm, outer diameter is 9.5mm.
Sa T-piece for m4 gen10? Pls help guys thank you
I used roof and gutter silicon
Why is it that when i installed my alluminion barrel and hop up my gun is very innacurate?
Hi,it's same with for Jin Ming HK416C 13th and do you have barrel for my JM HK416C...price please
Could you please do how and what you need to install a suppressor
just put it on the end
Hi what kind of tools do use to shorten the barrel ?
lee sekhoe barrel cutters,arrow cutter works as well
I s it possible install the inner barrel backwards? Mine has three grooves on one end, should the grooves be inserted into the t piece or does it not really matter?
The grooves are meant to be inserted into the T piece so the glue sticks better.
My all metal M4 shoot 380fps, all metal gears, V2 12;1 gear ration, 10in handrail , simple looking, wanted power accuracy (a sleeper) 110m spring , razor hope up etc,). BUT THE GEL BALLS ARE 80% exploding. Aka, beast gel balls when firing……… when it works 35m dead straight hard hitting, but what’s the point when most explode !!!!! why is this happening please and what can I do to fix it. I’m happy to pay to send to you to make a video {lol}…………… help snd advise!!!!
Warm regards stay safe and healthy 👍🏼👍🏼🇦🇺🇦🇺
What glue??
Why doesn't tac edge offer upgrades as a service?
@@TacticalEdgeHobbiesAU Cheers for the quick reply. So you will fit upgrades or just supply?
WHY? Just use hot glue! Warm the barrel so that the hot glue stays a bit runny and apply the hot glue around the end of the barrel to be inserted into t-peice and insert with a twist. If the glue hardens too quickly just warm the barrel up again. This allows you to change barrels and use the same t-peice over and over. Just be sure to avoid fouling the barrel with the glue. Hot glue is cheaper and easier to clean up as well as allowing you to reuse your t-peice.
Does the barrel need to be the same length as the outer barrel? I want a 37cm metal outer barrel but can only find 29cm aluminium barrels... cheers
No it doesn’t but you won’t be able to mount a hop up to your inner barrel. The SKD M4SS comes with the longer outer barrel and shorter inner barrel from factory and it didn’t cause any issues for me but I am upgrading to the metal outer barrel and longer inner barrel to place a hop up on it
Zac Mann yep thanks, realise now there’s longer inner barrels out there... thanks man
Matt Mabarrack all good brother. Happy to help
@@zacmann21 wait so just to clarify, I am looking at getting a gen 8 m4a1, but i am wanting to upgrade the barrel from nylon to aluminium. do i have to get an inner barrel thats the same length as the factory? can the inner barrel be longer then the outer barrel? and with connecting a hopup, same thing does the inner barrel have to be longer so it sticks out?
@@wclvez9325 for a hop up yes the inner barrel needs to be longer then the outer barrel to connect to it unless you pay more for a threaded hop up like the rizer hop up but that is providing that your outer barrel is threaded as well, if you are just looking for a good upgrade on an alloy barrel then really you can go longer or shorter as it's up to you..
Otherwise it'll go pfwhuh... Love it XD
Noice
Not by the hairs of my chiny chin chin lol
Full steal and aluminum frame gears and compression boxes just in case I like to modify and prefer steal replication 😢help australia get airsoft industry into australia go to ( two track ) airsoft in australia and sign the petition end government insanity how a toy adult type is eligal should be criminal I will be bye very soon as soon as I find one not to plastic and feels bb not nurf style likely auto likely fun not sniper as steal replica is the best there with 2 9mm ? any Co2 ones???? And what about bb change overs if law is changed for the fan's 😆I could go on but iam also working on a few my self for this industry shame most fall into bb at current hope it's a good one for airsoft in EU and America as the claymore would kill you if done for military use and would be best suited for kids and gel range like hear😢😆.
Maybe get better at the language you speak before trying to go up against the Government, if you can't articulate yourself no ones gonna listen to you.